Velkommen til portalen for nye arbejdsemner

3479 Hits

ISO/TC 69/SC 4/WG 11

  • prEN ISO 13438 rev

    05-12-2013
    00189173

    Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This international standard specifies a screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation. The test is applicable to polypropylene and polyethylene based products. The data are suitable for screening purposes but not for deriving performance data such as lifetime unless supported by further evidence.
  • EN 13445-2:2014/prA4

    16-02-2016
    00054160

    Unfired pressure vessels - Part 2: Materials

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    Amends Clause 7.4 Qualification of welders and welding operators
  • EN 13445-3:2002/prA21

    20-06-2008
    00054094

    Unfired pressure vessels - Part 3: Design

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    The rules in this chapter concern the design and stress analyses of class 1 equipment. The purpose of these rules is to ensure the respect of stipulated safety margins relative to the types of mechanical damage which might occur as a result of imposed loadings.
  • EN 13445-3:2002/prA20

    10-11-2006
    00054079

    Unfired pressure vessels - Part 3: Design

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Application of multi-axial material data in the creep regime for EN 13445
  • EN 13445-3:2014/prA3

    24-10-2014
    00054064

    Unfired pressure vessels - Part 3: Design

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    Amendment to Clauses 17 & 18 for Fatigue
  • EN 13445-3:2009/prA8

    09-12-2013
    00054114

    Unfired pressure vessels - Part 3 Design

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    Amendment to clause 19 (negligible creep)
  • EN 13445-4:2014/prA2

    25-09-2015
    00054156

    Unfired pressure vessels - Part 4: Fabrication

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    Amends clauses 4.2.2.2, 7.3 and 8.4.3"
  • EN 13445-5:2009/prA5

    18-01-2013
    00054130

    Unfired pressure vessels - Part 5: Inspection and testing

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Correct application of the philosophy of testing groups and governinig joints
  • prEN 13451-1 rev

    16-10-2017
    00136418

    Swimming pool equipment – Part 1: General safety requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies general safety requirements and test methods for equipment used in classified swimming pools as specified in EN 15288-1 and EN 15288-2. Where specific standards exist, this general standard should not be used alone. Special care is required in applying this general standard alone to equipment for which no product specific standard has yet been published.
  • prEN 13467 rev

    05-05-2015
    00088390

    Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard speci-fies the equipment and procedures for determin-ing the dimen-sions, squareness and linearity of pre-formed pipe insulation, supplied in one piece, half sections or segments. It is applicable to thermal insulat-ing products.
  • prEN ISO 13473-1 rev

    04-07-2014
    00227424

    Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    .....
  • prEN ISO 13479 rev

    18-09-2018
    00155923

    Polyolefin pipes for the conveyance of fluids – Determination of resistance to crack propagation – Test method for slow crack growth on notched pipes

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 13480-1 rev

    22-10-2010
    00267041

    Metallic industrial piping - Part1: General

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    1.1 The purpose of EN 13480 is to define the requirements for design, manufacture, installation, testing and inspection of industrial piping systems and supports, including safety systems, made of metallic materials (but initially restricted to steel) with a view to ensure safe operation. 1.2 EN 13480 is applicable to metallic piping above ground, ducted or buried, independent of pressure.
  • EN 13480-2:2012/prA8

    30-10-2015
    00267066

    Metallic industrial piping - Part 2: Materials

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Part of this European Standard specifies the requirements for materials (including metallic clad materials) for industrial piping and supports covered by EN 13480-1 manufactured from of metallic materials. It is currently limited to steels with sufficient ductility. This Part of this European Standard is not applicable to materials in the creep range. Revision of Table B.2-9 (bolts and nuts) with respect to changes made in latest version of EN 10269:2013
  • EN 13480-2:2012/prA10

    13-11-2015
    00267072

    Metallic industrial piping - Part 2: Materials

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 13480 covers the requirements for materials (including clad materials) for industrial piping and supports covered by EN 13480-1 constructed of metallic materials and is currently limited to steels with sufficient ductility below the creep range. It specifies the assessment of compliance for these materials. It also provides rules for the establishment of technical delivery conditions for materials for industrial piping.
  • EN 13480-2:2012/prA9

    13-11-2015
    00267071

    Metallic industrial piping - Part 2: Materials

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 13480 covers the requirements for materials (including clad materials) for industrial piping and supports covered by EN 13480-1 constructed of metallic materials and is currently limited to steels with sufficient ductility below the creep range. It specifies the assessment of compliance for these materials. It also provides rules for the establishment of technical delivery conditions for materials for industrial piping.
  • EN 13480-3:2012/prA1

    30-10-2015
    00267043

    Metallic industrial piping - Part3: Design and calculation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 13480 describes the requirements for the design and calculation of industrial metallic piping systems, including supports.
  • EN 13480-4:2012/prA3

    05-08-2015
    00267068

    Metallic industrial piping - Part 4: Fabrication and installation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Part of this European standard EN 13480 describes the requirements for fabrication and installation of piping systems, including supports, designed in accordance with EN 13480-3.
  • EN 13481-4:2012/prA2

    11-11-2014
    00256694

    Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard is applicable to fastening systems, in categories A - E (see EN 13481 1:2012, 3.1), for use on concrete sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1. Table 1 - Fastening category criteria Category Maximum design axle load kN Minimum curve radius m A 130 40 B 180 80 C 260 150 D 260 400 E 350 150 NOTE The maximum axle load for categories A and B does not apply to maintenance vehicles. The requirements apply to: - fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems; - fastening systems for the rail sections in EN 13674-1 (excluding 49 E4) and EN 13674-4+A1. This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints. This standard is for type approval of a complete fastening assembly only.
  • EN 13481-5:2012/prA1

    12-11-2014
    00256696

    Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard is applicable to fastening systems, in categories A - D as specified in EN 13481 1:2012, 3.1, for attaching rails to the uppermost surface of concrete or asphalt slabs and for embedded rails in non-ballasted tracks, with maximum axle loads and minimum curve radii in accordance with Table 1. Table 1 - Fastening category criteria Category Maximum design axle load Minimum curve radius kN m A 130 40 B 180 80 C 260 150 D 260 400 NOTE The maximum axle load for categories A and B does not apply to maintenance vehicles. The requirements apply to: a) fastening systems which act on the foot and/or web of the rail including direct fastening systems and systems which incorporate a baseplate; b) fastening systems which incorporate concrete elements and which each have not more than one supporting element per rail, including booted concrete blocks and sleepers complete with boots; c) adhesive and mechanical fastening systems for embedded rail but excluding rail cast into road pavements. In the case of (b), the concrete element is considered to be part of the fastening system. If the system includes concrete elements which each have more than one supporting location per rail, those concrete elements are considered to be part of the slab and not part of the fastening system. This standard is only applicable to fastening systems for rail sections in EN 13674-1 (except 49E4) and EN 13674-4+A1; it is not applicable to special fastening systems for use at bolted joints or glued joints. This standard is for type approval of a complete fastening assembly only.
  • prEN 13487 rev

    28-04-2017
    00110056

    Heat exchangers - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard is one of a series of European Standards dedicated to air-cooled heat exchangers.  forced convection air cooled refrigerant condensers as specified in EN 327;  forced convection unit air coolers for refrigeration as specified in EN 328;  air cooled liquid coolers "dry coolers" as specified in EN 1048. This standard provides information for assessing and presenting the acoustic emission characteristics of heat exchangers under stationary operating conditions. This European Standard is applicable to selfstanding forced convection air cooled refrigerant condensers and air cooled liquid coolers "dry coolers" and air coolers.
  • prEN 13492 rev

    23-04-2014
    00189203

    Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the relevant characteristics of geosynthetic barriers, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers in the construction of liquid waste disposal sites and in the construction of transfer stations and secondary containment for the storage of liquid waste on a waste disposal site only and the appropriate test methods to determine these characteristics. The intended use of these products is to control the leakage of fluids through the construction. This document is not applicable to geotextiles or geotextile-related products. This document provides for the evaluation of conformity of the product to this document. This document defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties.
  • prEN 13493 rev

    23-04-2014
    00189197

    Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the relevant characteristics of geosynthetic barriers, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers in the construction of solid waste storage and solid waste disposal sites, and the appropriate test methods to determine these characteristics. The intended use of these products is to control the leakage of fluids through the construction. This document is not applicable to geotextiles or geotextile-related products. This document provides for the evaluation of conformity of the product to this document. This document defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties.
  • prEN 13501-1 rev

    06-05-2014
    00127306

    EN 13501-1: 2007+A1:2009, 'Fire classification of construction products and building elements – Part 1: Classification using data from reaction to fire tests'

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard provides the reaction to fire classification procedure for all construction products, including products incorporated within building elements. Products are considered in relation to their end use application. This document applies to three categories, which are treated separately in this European Standard: - construction products, excluding floorings and linear pipe thermal insulation products; - floorings; - linear pipe thermal insulation products.
  • prEN 13501-3 rev

    06-05-2014
    00127308

    EN 13501-3:2005+A1:2009, 'Fire classification of construction products and building elements – Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers'

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the procedure for classification of the resistance to fire performance of construction products and building elements used as components of building service installations, using data from fire resistance tests which are within the direct field of application of the relevant test method. !Classification on the basis of extended application of test results is also included in the scope of this European Standard.