Velkommen til portalen for nye arbejdsemner

3474 Hits

ISO/TC 69/SC 4/WG 11

  • prEN 13523-21 rev

    02-04-2015
    00139563

    Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the procedure for evaluating the behaviour of an organic coating on a metallic substrate during and after outdoor exposure. Panel design, preparation and the procedure for outdoor exposure are performed in accordance with EN 13523-19. After washing of the panel some dirt can remain on the panel. This remaining dirt can influence the accuracy and precision of readings of gloss and colour, performed on exposed panels, although carried out in accordance with the standards. Unlike other precise measurements, the objective of this European Standard is to report on trends in the corrosion and/or paint degradation behaviour of coil coated panels.
  • prEN 13523-24 rev

    28-04-2015
    00139570

    Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Part of EN 13523 describes the procedure for determining the resistance to blocking and/or pressure marking of an organic coating on a metallic substrate. Pressure generated within a coil or a stack of sheets can affect the coating surface and cause marks of gloss transfer, plasticizer migration, colour change, etc. and even blocking/sticking. Lighter forms of pressure marking are normally removed by gentle heat (e.g. sunshine).
  • prEN 13523-8 rev

    02-04-2015
    00139566

    Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the procedures for determining the resistance to salt spray (fog) of an organic coating on a metallic substrate (coil coating). For steel neutral salt spray (fog) is usually used, and for aluminium acetic acid salt spray (fog).
  • prEN 13525 rev

    25-11-2014
    00144324

    Forestry machinery - Wood chippers - Safety"

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies safety requirements and their verification for design and construction of transportable, i.e. self-propelled, mounted, semi-mounted and trailed, wood chippers used in forestry, agriculture, horticulture and landscaping. This document applies to chippers, used when stationary, which are manually loaded with wood through a horizontal or near horizontal infeed chute and where the infeed action is performed by the chipping components acting as infeed components and by separate integrated infeed components such as rollers or chain conveyors integral to the infeed chute. The included wood chippers may be designed either for continuous working (loading, feeding and chipping) or for batch-wise operation of loading. The included wood chippers may be powered either by an external power take-off, hydraulics etc. or by an integral power source such as an internal combustion engine.
  • prEN ISO 13526

    19-06-2019
    JT005167

    Space data and information transfer systems – Tracking data message

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    ISO 13526:2010 specifies a standard message format for use in exchanging spacecraft tracking data between space agencies. Such exchanges are used for distributing tracking data output from routine interagency cross-supports, in which spacecraft missions managed by one agency are tracked from a ground station managed by a second agency. The standardization of tracking data formats facilitates space agency allocation of tracking sessions to alternate tracking resources. ISO 13526:2010 includes requirements and criteria that the message format has been designed to meet. For exchanges where these requirements do not capture the needs of the participating agencies, another mechanism can be selected.
  • prEN ISO 13541

    19-06-2019
    JT005169

    Space data and information transfer systems – Attitude data messages

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    ISO 13541:2010 specifies two standard message formats for use in transferring spacecraft attitude information between space agencies: the attitude parameter message (APM) and the attitude ephemeris message (AEM). Such exchanges are used for: preflight planning for tracking or attitude estimation support; scheduling attitude and data processing support; carrying out attitude operations; performing attitude comparisons; carrying out attitude propagations and/or sensor predictions; and testing to initialize sub-system simulators (communications, power, etc.). ISO 13541:2010 includes sets of requirements and criteria that the message formats have been designed to meet. For exchanges where these requirements do not capture the needs of the participating agencies, another mechanism may be selected.
  • prEN 13556 rev

    24-02-2012
    00175153

    Round and sawn timber - Nomenclature of timbers used in Europe

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard lists commercial hardwood and softwood timbers used in Europe.
  • prEN 13565-1 rev

    23-10-2014
    00191275

    Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements for materials, construction, and performance of components intended for use in fixed foam fire fighting systems, and using foam concentrates conforming to EN 1568-1 to EN 1568-4. The components covered are: proportioners, sprayers, semi-subsurface hose units, branchpipes, low/medium expansion foam generators, high expansion foam generators, foam chambers, tanks and pressure vessels. Methods of test are given in annexes A to K. Requirements are also given for the provision of the characteristic data needed for correct application of components. NOTE 1 Unless otherwise stated pressures are gauge pressures expressed in bar. The requirements of this specification do not cover, except where stated, the use of combinations of components to form part, or the whole, of a fire fighting system. NOTE 2 It should not be assumed that components conforming to this specification are necessarily compatible one with another. Requirements for pumps, motors and the functioning of mechanical components (i.e. remote control turrets) are outside the scope of this standard.
  • prEN 13565-2 rev

    24-02-2016
    00191285

    Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements and describes the methods for design, installation, testing and maintenance of low, medium, and high expansion foam fire extinguishing systems. This European Standard provides guidance for the design of various foam systems available to persons with knowledge and experience in determining the selection of foam fire extinguishing systems which will be effective in protecting specific hazard configurations. This European Standard does not cover a risk analysis carried out by a competent person. Nothing in this European Standard is intended to restrict new technologies or alternative arrangements, provided that the level of safety prescribed in this standard is not lowered, and supported by documented evidence/test reports.
  • prEN ISO 13567-1

    11-11-2015
    CSF01106

    Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 13567-2 rev

    11-11-2015
    CSF01107

    Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 13577-11

    30-06-2014
    00322032

    Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnace (proposed ISO-Titel: Industrial furnaces and associated processing equipment - Part 11: Requirements for arc furnaces)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Standard specifies the general safety requirements for electric arc furnaces (EAF) to melt steel not containing radioactive material. This Standard deals with all significant hazards, hazardous situations and events pertinent to EAF, when used as intended and under conditions foreseen by the manufacturer, but also includes foreseeable faults and malfunctions in case of misuse. This Standard covers the following equipment: - EAF with AC technology (alternating current); - EAF with DC technology (direct current); - scrap pre-heating technology; - associated equipment/devices.
  • EN ISO 13588:2012/prAC

    04-09-2013
    00121C23

    Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 13595-1 rev

    01-10-2010
    00162325

    Protective clothing for motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 1: General requirements

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies general requirements for motorcycle riders jackets, trousers and one-piece or divided suits which are intended to protect the wearer against mechanical injury, it does not apply to motor sport competition events organised by Federations. It also specifies appropriate test methods.
  • prEN ISO 13606-1 rev

    04-11-2014
    00251307

    Health informatics - Electronic health record communication - Part 1: Reference model

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 13606-2

    28-09-2012
    00251280

    Health informatics - Electronic health record communication - Part 2: Archetype interchange specification

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of ISO 13606 specifies the information architecture required for interoperable communications between systems and services that need or provide EHR data. This part of ISO 13606 is not intended to specify the internal architecture or database design of such systems. The subject of the record or record extract to be communicated is an individual person, and the scope of the communication is predominantly with respect to that person's care. Uses of healthcare records for other purposes such as administration, management, research and epidemiology, which require aggregations of individual people's records, are not the focus of this part of ISO 13606 but such secondary uses could also find this document useful. This part of ISO 13606 defines an archetype model to be used to represent archetypes when communicated between repositories, and between archetype services. It defines an optional serialized representation, which may be used as an exchange format for communicating individual archetypes. Such communication might, for example, be between archetype libraries or between an archetype service and an EHR persistence or validation service.
  • prEN ISO 13606-3

    28-09-2012
    00251282

    Health informatics - Electronic health record communication - Part 3: Reference archetypes and term lists

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of ISO 13606 is for the communication of part or all of the electronic health record (EHR) of a single identified subject of care between EHR systems, or between EHR systems and a centralized EHR data repository. It may also be used for EHR communication between an EHR system or repository and clinical applications or middleware components (such as decision support components) that need to access or provide EHR data, or as the representation of EHR data within a distributed (federated) record system. This part of ISO 13606 (EHR Communications Standard Series), defines term lists that each specify the set of values that particular attributes of the Reference Model defined in ISO 13606-1 may take. It also defines informative reference archetypes that correspond to ENTRY-level compound data structures within the Reference Models of openEHR and HL7 Version 3, to enable those instances to be represented within a consistent structure when communicated using this part of ISO 13606.
  • prEN ISO 13606-4

    28-09-2012
    00251281

    Health informatics - Electronic health record communication - Part 4: Security

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of this multipart standard on Electronic Health Record Communication describes a methodology for specifying the privileges necessary to access EHR data. This methodology forms part of the overall EHR communications architecture defined in Part 1 of this standard. This standard seeks to address those requirements uniquely pertaining to EHR communications and to represent and communicate EHR-specific information that will inform an access decision. It also refers to general security requirements that apply to EHR communications and points at technical solutions and standards that specify details on services meeting these security needs.
  • prEN ISO 13606-5 rev

    30-11-2012
    00251289

    Health informatics - Electronic health record communication - Part 5: Interface specification

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 13610 rev

    08-12-2014
    00216099

    Chemical disinfectants - Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2, step 1)

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a test method (phase 2, step 1) and requirements for the minimum virucidal activity against bacteriophages of chemical disinfectants that form a homogeneous, physically stable preparation in hard water and that are used in food and industrial areas, excluding areas and situations where disinfection is medically indicated and excluding products used on living tissues. This European Standard applies at least to the following: a) processing, distribution and retailing of: 1) food of animal origin: - milk and milk products; - meat and meat products; - fish, seafood, and their products; - eggs and egg products; - animal feeds; - etc.; 2) food of vegetable origin: - beverages; - fruits, vegetables and their derivatives (including sugar, distillery ...); - flour, milling and baking; - animal feeds; - .…; b) other industrial areas: - biotechnology (yeast, proteins, enzymes, ...). Using this European Standard, it is not possible to determine the virucidal activity against bacteriophages of undiluted product as some dilution is always produced by adding the inoculum and interfering substance. For chemical disinfectants that can be used without dilution it is not possible to determine whether these products, at a concentration above 80 % have a virucidal activity against bacteriophages. NOTE – The method described is intended to determine the activity of commercial formulations or active substances on viruses (bacteriophages) in the conditions in which they are used. This European Standard is applicable only to disinfectants, complying with the validation test (see annex A).
  • EN 13611:2015/prAC

    19-11-2015
    00058C04

    Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • EN 13624:2013/prA1

    19-02-2016
    00216107

    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1)

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 13628-1 rev

    10-04-2009
    00012257

    Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 13628-7 rev

    18-02-2011
    00012293

    Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 13631 rev

    10-04-2014
    00012342

    Petroleum and natural gas industries - Packaged reciprocating gas compressors

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite