Velkommen til portalen for nye arbejdsemner

3474 Hits

ISO/TC 69/SC 4/WG 11

  • prEN 13843 rev

    10-06-2014
    00136333

    Roller sports equipment - Inline-skates - Safety requirements and test methods

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard is applicable to inline-skates intended for users with a body mass of more than 20 kg and less than 100 kg. It specifies safety requirements for inline-skates, specifications for test methods, marking and information supplied by the manufacturer to reduce the risk of injuries to both third parties and the user during their normal use. Inline-skates for use by a rider of less than 20 kg do not belong to the scope of this European Standard. They are toys. This Standard does not apply to roller skates according to EN 13899. NOTE Requirements for inline-skates from the orthopedic point of view such as lateral support or similar were not included in this standard because these requirements differ from wearer and therefore cannot be covered by a standard.
  • prEN 13848-1 rev

    25-05-2015
    00256721

    Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements for the homologation of track geometry quality parameters as measured by various measuring devices fitted on track recording vehicles. These measuring devices are described in Part 2 of the standard. This European Standard applies to all track geometry parameters including track gauge, longitudinal level, alignment, cross level (cant / superelevation) and twist. It defines each parameter and specifies the requirements for measurement, the analysis methods and the presentation of results. Parts 3 and 4 give a description of measuring devices complying partially with this Part 1 according to the specificities of respectively track construction and maintenance machines, and manual and lightweight devices.
  • prEN ISO 13849-1

    25-04-2017
    00114177

    Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 13851

    03-03-2016
    00114174

    Safety of machinery - Two-hand control devices - Functional aspects and design principles

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This European Standard specifies the safety requirements of a two-hand control device and the dependency of the output signal from the input signals and describes the main characteristics of two-hand control devices for the achievement of safety and sets out combinations of functional characteristics for three types. It does not apply to devices intended to be used as enabling devices, as hold-to-run devices or as special control devices. This European Standard provides requirements and guidance on the design and selection (based on a risk assessment) of two-hand control devices including their assessment, the prevention of defeat and the avoidance of faults. It also provides requirements and guidance for two-hand control devices containing a programmable electronic system. It applies to all two-hand control devices, independent of the energy used, including two-hand control devices which are or are not integral parts of a machine and two-hand control devices which consist of one or more than one separate element.
  • prEN ISO 13854

    01-09-2014
    00114168

    Safety of machinery - Minimum gaps to avoid crushing of parts of the human body

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This European Standard specifies minimum gaps relative to parts of the human body and is applicable when adequate safety can be achieved by this method. Its object is to enable the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. This European Standard is applicable to risks from crushing hazards only and is not applicable to other possible hazards, e.g. impact, shearing, drawing-in.
  • prEN ISO 13857 rev

    29-07-2015
    00114172

    Safety of machinery -- Safety distances to prevent hazard zones being reached by upper and lower limbs

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 13862 rev

    05-02-2015
    00151449

    Floor cutting-off machines - Safety

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard applies to pedestrian controlled floor sawing machines having power feed, manual feed or hand feed (see 3.2) for sawing, grooving and milling floor surfaces made of concrete, asphalt and similar mineral building materials where the main power is supplied by electric or internal combustion prime engine. The power transmission of floor sawing machines is mechanical or hydraulic. This European Standard deals with all significant hazards pertinent to floor sawing machines, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. These machines are designed for use with rotating cutting-off wheels for wet and dry cutting. These cutting-off wheels can be either a diamond cutting-off wheel or a boron nitride cutting-off wheel. NOTE – Other types of cutting tools may also be used provided that they fall within the design and usage parameters of the machine. This standard does not cover this. This European Standard does not apply to: - self-propelled ride-on floor sawing machines; - machines moving along a rail; - hand-held portable cutting off machines for construction materials mounted on a mobile support, to be used as floor saws; - remote controlled machines. This European Standard covers electrical hazards by making reference to relevant European Standards (see 5.2). Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment or machinery and that are dealt with in standards for common use are not covered by this European Standard. Reference to pertinent standards is made where such standards are applicable and so far necessary. In this European Standard, floor sawing machines are called "machines", and cutting-off wheels are called "tools". This European Standard applies primarily to machines which are manufa
  • prEN 13880-10 rev

    06-10-2014
    00227326

    Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes a method for determining the adhesion and cohesion characteristics of hot applied joint sealant specimens following continuous extension and compression bond testing.
  • prEN 13880-13 rev

    06-10-2014
    00227327

    Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes a method for determining the cohesive extensibility and the adhesion to concrete of hot applied sealant-systems with or without priming simulating the moving of concrete pavement slabs during cooling conditions in wintertime.
  • prEN 13880-7 rev

    06-10-2014
    00227324

    Hot applied joint sealants - Part 7: Function testing of joint sealants

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes a function test for joint sealants intended for use in construction joints as well as in spontaneously formed cracks in road and airfield pavements.
  • prEN 13880-8 rev

    06-10-2014
    00227325

    Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes a method for determining the joint sealant resistance to fuel spillage by calculating the change in mass (if any), after immersion in the standard reference fuel.
  • prEN 13892-9

    27-11-2015
    00303027

    Methods of test for screed materials - Determination of shrinkage and swelling

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard describe a test method to determine shrinkage and swelling of cementitious, calcium sulphate and magnesite screed materials
  • prEN ISO 13897 rev

    08-04-2015
    00055393

    Dentistry -- Amalgam capsules

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • EN 13906-3:2014/prA1

    03-06-2015
    00407009

    Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3: Torsion springs

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 13911 rev

    04-03-2015
    00162323

    Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies minimum safety requirements and test methods for a firehood to be worn during firefighting operations and associated activities. This standard only applies in situations when protective clothing (EN 469), breathing apparatus (EN 136 and EN 137), and helmet (EN 443) are also worn.
  • prEN ISO 13918 rev

    14-08-2014
    00121689

    Welding - Studs and ceramic ferrules for arc stud welding

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 13943 rev

    21-12-2012
    00127281

    Fire safety - Vocabulary

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • EN 13967:2012/prA1

    08-08-2014
    00254159

    Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The scope of this amendment includes: - the introduction of CPR requirements (e.g. Annex ZA, clause 6) - removal of Product Data Sheets descriptions (e.g. clause 7 and Annex D) - reference to CEN/TR 16625 for MLV/MDV - correction of minor editorial issues.
  • prEN 13976-1 rev

    31-01-2014
    00239038

    Rescue systems - Transportation of incubators - Part 1: Interface conditions

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements for the interface between the ambulance and the incubator and the associated equipment, needed for care and treatment of infants, used in emergency or planned transports to ensure interchangeability and interoperability and to provide uninterrupted care of patients.This European Standard does not give requirements for the vehicles, crafts, devices or incubators as such; these requirements are found in other standards. However, transport incubators are normally combined with other equipment to form a "transport incubator system".
  • prEN 13976-2 rev

    31-01-2014
    00239037

    Rescue systems - Transportation of incubators - Part 2: System requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements for a transport incubator system needed for care and treatment of infants, used in emergency or planned transport.It specifies the particular requirements needed to ensure the proper function of equipment during transportation (e.g. monitors, respirators, infusion pumps, extra corporeal lung support- (ECLS-) systems, gas supply) and to provide safe transportation for infants and operators.This European Standard also stipulates that the equipment or systems shall not interfere with the functions of the ambulance providing transportation.This European Standard does not give requirements for the vehicles, crafts, devices or incubators as such, these requirements are found in other standards. However, transport incubators are normally combined with other equipment to form a transport incubator system.
  • prEN 13979-1 rev

    11-11-2015
    00256809

    Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The aim of this European Standard is to define the requirements that a monobloc wheel of a freight of passenger railway vehicle non-powered axle shall meet in order to be able to be used on a European network. For wheels of powered axles or wheels with noise dampers, the requirements may be amended or supplemented. For light vehicles and tramways, other standards or documents accepted by the customer and supplier may be used. This European Standard only applies to wheels of new design. These requirements are intended to assess the validity of the design choice for the proposed use. The assessment of these requirements is the technical approval procedure. This European Standard is applicable to forged and rolled wheels for which the quality requirements are defined in EN 13262.
  • prEN ISO 13982-1 rev

    27-05-2015
    00162381

    Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • EN 13984:2013/prA1

    08-08-2014
    00254160

    Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The scope of this amendment includes: - the introduction of CPR requirements (e.g. Annex ZA, clause 6) - removal of Product Data Sheets descriptions (e.g. clause 7 and Annex D) - reference to CEN/TR 16625 for MLV/MDV - correction of minor editorial issues.
  • ISO/NP TS 13989-1

    13-10-2015
    069382

    Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears-- Part 1: Flash temperature method

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
  • ISO/NP TS 13989-2

    13-10-2015
    069383

    Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears-- Part 2: Integral temperature method

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget