Velkommen til portalen for nye arbejdsemner

3474 Hits

ISO/TC 69/SC 4/WG 11

  • prEN ISO 14232-1

    05-02-2014
    00240068

    Thermal spraying - Powders - Part 1: Characterisation and technical supply conditions

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    These Standards cover powders which are currently applicable in thermal spraying.
  • prEN ISO 14232-2

    07-02-2014
    00240069

    ISO/NP 14232-2 "Thermal spraying - Powders - Part 2: Comparison of coating performance and spray powder chemistry"

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This Standard covers powders which are currently applicable in thermal spraying.
  • prEN ISO 14244

    22-10-2015
    00307163

    Oilseed meals — Determination of soluble proteins in potassium hydroxide solution

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard specifies a method for the determination of soluble proteins in potassium hydroxide solution in soya meals, rapeseed meals and sunflower pellets, which are then assayed using the Kjeldahl method as specified in ISO 5983-1 and ISO 5983-2.
  • prEN ISO 14245 rev

    05-02-2015
    00286168

    Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 14253-1 rev

    04-11-2015
    00290216

    Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specifications

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prCEN ISO/TS 14253-4 rev

    24-10-2013
    00290194

    Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 14254 rev

    09-01-2015
    00345079

    Soil quality - Determination of exchangeable acidity in barium chloride extracts

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 14259 rev

    12-10-2012
    00193267

    Adhesives - Adhesives for floor coverings - Essential characteristics

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the health requirements for adhesives used in indoor environment for the installation of resilient and textile floor coverings on a given subfloor. This document specifies performance requirements of an adhesive when tested to a standard method with a characteristic type of floor covering. The mechanical and electrical values defined in this standard are considered to indicate a general suitability for use of an adhesive with the corresponding group of floor coverings. This standard can also be used for the evaluation of a particular floor covering with the corresponding type of adhesive. This standard does not contain criteria or recommendations for the practical installation of floor coverings. The values given in this standard do not guarantee the complete functionality of combinations of adhesives and floor coverings in practical application. Parquet adhesives and adhesives for ceramic tiles are not covered by this standard.
  • prEN 14316-1 rev

    05-05-2015
    00088388

    Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements for expanded perlite products for in-situ installation in roofs, ceilings, walls and floors. This Part 1 of the standard is a specification for the insulation products before installation covering the five product types, Perlite Aggregate (EPA), Coated Perlite (EPC), Bitumen Coated Perlite (EPB), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM). Part 1 of this European Standard describes the product characteristics and includes procedures for testing, evalua-tion of conformity, marking and labelling. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. This European Standard does not cover factory made insulation products of formed shapes and boards made with expanded perlite. The products covered by this standard are not intended to be used primarily for airborne sound insulation or sound absorption applications although they may improve the performance of the buildings in these respects when installed for their primary thermal insulation intended use.
  • prEN 14317-1 rev

    15-09-2014
    00088371

    Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements for the four types of exfoliated vermiculite products Vermiculite Aggregate (EVA), Coated Vermiculite (EVC), Hydrophobic Vermiculite (EVH) and Premixed Vermiculite (EVM), containing less than 1 % organic material as defined by annex D for in-situ insulation of roofs, ceilings, walls and floors.This Part 1 of this standard is a specification for the insulation products before installation.This Part 1 of this standard describes the product characteristics and includes procedures for testing, evalua-tion of conformity, marking and labelling.This European Standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.This European Standard does not cover factory made insulation products of formed shapes and boards made with exfoliated vermiculite or in-situ products intended to be used for the insulation of building equipment and industrial installations.This European Standard does not specify performance requirements for airborne sound insulation and for acoustic absorption applications.
  • prEN 14325 rev

    10-02-2016
    00162309

    Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the performance classification and test methods for materials used in chemical protective clothing, including gloves and including footwear, when the footwear is an integral part of the clothing, and for seams, joins and assemblages. This is a reference standard to which chemical protective clothing performance standards may refer in whole or in part, but this standard is not exhaustive in the sense that product standards may well require testing according to test method standards which are not included in this standard. For some of the test method standards for chemical protective clothing referenced in this European Standard, this European Standard modifies the requirements for conditioning, sampling, calculation of test results and reporting. At these instances this standard takes precedence over the referenced test method standards. NOTE Whilst these performance levels are intended to relate to the usage to which the chemical protective clothing is to be put, it is essential that the chemical protective clothing manufacturer or supplier indicate the intended use of the protective clothing and that the user (specifier) carries out a risk assessment in order to establish the correct performance level for the intended task. This should be included as a mandatory requirement in the information to be supplied by the manufacturer in the product standard.
  • prEN ISO 14329 rev

    15-06-2012
    00121634

    Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 14351-1 rev

    22-04-2011
    00033431

    Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    This European Standard identifies material independent performance characteristics that are applicable to windows (including roof windows, roof windows with external fire resistance and French windows), external pedestrian doorsets (including unframed glass doorsets, escape route doorsets) and screens. This European Standard applies to: Manually or power operated windows, French windows and screens for installation in vertical wall apertures and roof windows for installation in inclined roofs, complete with: - related hardware, if any; - weather stripping, if any; - glazed apertures when intended to have glazed apertures; - with or without incorporated shutters and/or shutterboxes and/or blinds; and manually or power operated windows, roof windows, French windows and screens that are - fully or partially glazed including any non-transparent infill; - fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding). - Manually operated external pedestrian doorsets with flush or panelled leaves, complete with: - integral fanlights, if any; - adjacent parts that are contained within a single frame for inclusion in a single aperture, if any. The products covered by this European Standard are not assessed for structural applications. This European Standard does not apply to: - windows and pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to prEN 16034 but individual characteristics and performance requirements given in clause 4 can be relevant for these doors and windows (see prEN 16034); - rooflights according to EN 1873 and prEN 14963; - curtain walling according to EN 13830; - industrial, commercial and garage doors and gates according to EN 13241-1; - internal pedestrian doorsets according to prEN 14351-2 but individual characteristics and performance requirements given in clause 4 can be relevant for internal doors (see prEN 14351-2); - revolving doorsets;
  • EN 14351-1:2006+A1:2010/prA2

    06-10-2015
    00033510

    Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard identifies material independent performance characteristics that are applicable to win-dows (including roof windows, roof windows with external fire resistance and French windows), external pedestrian doorsets (including unframed glass doorsets, escape route doorsets) and screens. This European Standard applies to: - Manually or power operated windows, French windows and screens for installation in vertical wall aper-tures and roof windows for installation in inclined roofs, complete with: - related hardware, if any; - weather stripping, if any; - glazed apertures when intended to have glazed apertures; - with or without incorporated shutters and/or shutterboxes and/or blinds; and manually or power operated windows, roof windows, French windows and screens that are - fully or partially glazed including any non-transparent infill; - fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding). - Manually operated external pedestrian doorsets with flush or panelled leaves, complete with: - integral fanlights, if any; - adjacent parts that are contained within a single frame for inclusion in a single aperture, if any. The products covered by this European Standard are not assessed for structural applications. This European Standard does not apply to: - windows and pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to prEN 14351-3 but individual characteristics and performance requirements given in clause 4 can be relevant for these doors and windows (see prEN 14351-3); - rooflights according to EN 1873 and prEN 14963; - curtain walling according to EN 13830; - industrial, commercial and garage doors and gates according to EN 13241-1; - internal pedestrian doorsets according to prEN 14351-2 but individual characteristics and performance re-quirements given in clause 4 can be relevant for internal doors (see prEN 14351-2); - revolvin
  • EN 14364:2013/prA1

    11-07-2014
    00155819

    Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the required properties of the piping system and its components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) intended to be used for drainage or sewerage, including culverts, with or without pressure. In a pipework system, pipes and fittings of different nominal pressure and stiffness ratings may be used together. It is the responsibility of the purchaser or specifier to make the appropriate selections taking into account their particular requirements and any relevant national regulations and installation practices or codes. This European Standard is applicable to GRP-UP, with flexible or rigid joints (see 3.33 and 3.34), primarily intended for use in buried installations. It is applicable to pipes, fittings and their joints of nominal sizes from DN 100 to DN 4000, which are intended to be used for the conveyance of surface water or sewage at temperatures up to 50 °C, with or without pressure. This European Standard covers a range of nominal sizes, nominal stiffnesses and nominal pressures. Clause 6 is applicable to fittings made using any of the following techniques: a) fabricated from straight pipe; b) moulded by: 1) filament winding; 2) tape winding; 3) contact moulding; 4) hot or cold press moulding. This European standard is applicable to the joints to be used in GRP-UP piping systems to be used for the conveyance of water, both buried and non-buried. It is applicable to joints, which are or are not intended to be resistant to axial loading. It covers requirements to prove the design of the joint. It specifies type test performance requirements for the following joints as a function of the declared nominal pressure rating of the pipeline or system: c) socket-and-spigot (either integral with pipe or sleeve coupling) or mechanical joint; d) locked socket-and-spigot joint; e) cemented or wrapped joint; f) bolted flange joint. Recommended practices for the installation of bur ...
  • prEN 14373 rev

    09-11-2010
    00305126

    Explosion suppression systems

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard describes basic requirements for the design and application of explosion suppression systems. It also specifies a method for evaluating the effectiveness and the scale up of explosion suppression systems against defined explosions. The standard gives criteria for alternative test apparatus used to undertake explosion suppression efficacy tests and criteria to be applied in defining the safe operating regime of an explosion suppression system.
  • prEN 14374 rev

    20-10-2015
    00124137

    Timber structures - Laminated veneer lumber (LVL) - Requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard sets out provisions regarding the performance characteristics of structural laminated veneer lumber (LVL) for use in buildings and bridges and non-structural laminated veneer lumber for internal and external applications in construction. It also lays down procedures for Assessment and Verification of Constancy of Performance of laminated veneer lumber. This European standard defines provisions for bonding strength and durability of bonding strength in dry, humid and exterior conditions. It covers structural LVL to be used in all conditions and non-structural LVL to be used in the respective conditions for which bonding strength tests have been performed.
  • prEN 14396 rev

    30-11-2012
    00165261

    Fixed ladders for manholes

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard applies to permanently fixed ladders in manholes. It specifies the performance criteria for the mechanical stability and resistance providing protection against falling. The ladders specified in this European Standard are suitable for use in sewage, rainwater, surface water and, subject to the requirements of national regulations, potable water environments.
  • EN 14399-1:2015/prA1

    22-02-2016
    00185377

    High-strength structural bolting assemblies for preloading - Part 1: General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the general requirements for bolt/nut/washer(s) assemblies for high-strength structural bolting, which are suitable for preloading. The intended use of bolting assemblies in accordance with this European Standard is structural metallic works. NOTE 1 – High-strength structural bolting assemblies in accordance with EN 14399-2 to EN 14399-10 are designed to fulfil the requirements of this European Standard. NOTE 2 – High-strength structural bolting assemblies are suitable for preloading in accordance with EN 1090-2 in steel structures. High-strength structural bolting assemblies smaller than M12 are not designed to be preloaded. High-strength structural bolting assemblies are not designed to be welded. Railway rail fasteners are not covered by this standard.
  • EN 14399-2:2015/prA1

    22-02-2016
    00185375

    High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the technical requirements for high-strength structural bolting assemblies in order to ensure the suitability for preloading of bolted connections in metallic structures. A suitability test is specified to check the behaviour of the structural bolting assemblies so as to ensure that the required preload can be reliably obtained by the tightening methods specified in EN 1090 2 with sufficient margins against overtightening and against failure.
  • prEN 14404 rev

    30-10-2009
    00162316

    Personal protective equipment - Knee protectors for work in the kneeling position

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies requirements and test methods for knee protectors for work in the kneeling position
  • EN ISO 14405-2:2011/prA1

    28-02-2017
    00290227

    Geometrical product specifications (GPS) – Dimensional tolerancing – Part 2: Dimensions other than linear sizes – Amendment 1

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 14414 rev

    29-08-2016
    00197093

    Pump system energy assessment

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 14456 rev

    17-06-2014
    00164580

    Products used for treatment of water intended for human consumption - Bone charcoal

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard is applicable to bone charcoal used for the treatment of water intended for human consumption. It describes the characteristics of bone charcoal and specifies the requirements and the corresponding test methods for bone charcoal. It gives information on its use in water treatment.
  • prEN ISO 14457 rev

    19-07-2014
    00055386

    Dentistry - Handpieces and motors

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite