Velkommen til portalen for nye arbejdsemner

3479 Hits

ISO/TC 69/SC 4/WG 11

  • prEN ISO 14414 rev

    29-08-2016
    00197093

    Pump system energy assessment

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 14456 rev

    17-06-2014
    00164580

    Products used for treatment of water intended for human consumption - Bone charcoal

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard is applicable to bone charcoal used for the treatment of water intended for human consumption. It describes the characteristics of bone charcoal and specifies the requirements and the corresponding test methods for bone charcoal. It gives information on its use in water treatment.
  • prEN ISO 14457 rev

    19-07-2014
    00055386

    Dentistry - Handpieces and motors

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 14458 rev

    02-04-2015
    00085080

    Personal eye-equipment - Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This document applies to visors designed specifically to be fitted to and/or used with helmets conforming to EN 443 when used by firefighters, or helmets which conform to EN 443 or prEN 14052 when used by ambulance and emergency services, as the situation dictates. They are intended to provide protection against the various hazards expected to be encountered in firefighting, ambulance and emergency service duties, except respiratory, smoke, and gas /vapour hazards.
  • prEN 14460 rev

    04-12-2014
    00305125

    Explosion resistant equipment

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies requirements for explosion pressure resistant and explosion pressure shock-resistant equipment. This standard is applicable to process vessels and systems. It is not applicable to individual items of equipment such as motors and gearboxes that may be designed to withstand an internal explosion, which are subject of EN 13463-3. This standard is valid for atmospheres having pressures ranging from 800 hPa to 1100 hPa and temperatures ranging from -20 °C to +60 °C. This standard applies to equipment and combinations of equipment where deflagrations may occur and is not applicable to equipment and combination of equipment where detonation may occur. It is essential that this standard be used for equipment made of metallic materials only.
  • prEN 14492-2 rev

    09-11-2012
    00147129

    Cranes - power driven winches & hoists - Part 2: Power driven hoists

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    EN 14492-2:2006+A1:2009 shall be reviewed on the basis of EN 13135 and EN 13001- 1, 2 and -3.1.
  • ISO/NP TR 14521

    13-11-2015
    070392

    Gears -- Calculation of load capacity of wormgears

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 14525 rev

    21-08-2009
    00203042

    Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials : ductile iron, grey steel, PVC-U, PE, fibre-cement

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the requirements and associated test methods applicable to wide tolerance ductile iron couplings and wide tolerance flange adaptors intended for use with pipe components made from a number of pipe materials (ductile iron, grey iron, PE, PVC-U, steel, fibre-cement), for providing a leak tight seal over a wide range of pipe external diameters: - to convey water (e.g. potable water); - with or without pressure; - to be installed below or above ground, inside or outside buildings. This standard is not intended to cover sewerage or gas applications, where other requirements may be necessary. This standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron products. This standard covers ductile iron products cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, in a size range extending from DN 40 to DN 600, for an allowable operating pressure (PFA) up to 16 bar, for fluid temperatures between 0 °C and 25 °C excluding frost. For higher temperatures, up to 50 °C, additional type testing should be carried out. It also gives performance requirements and associated test methods for restrained and non-restrained flexible joints. Joint design and gasket shapes are outside the scope of this standard. NOTE 1 – PFA may be limited depending on pipe materials effectively connected. NOTE 2 – In this standard, all pressures are relative gauge pressures, expressed in bars (100 kPa = 1 bar). NOTE 3 – EN 545 gives the specifications for the ductile iron fittings to be used with ductile iron pipes. NOTE 4 – EN 12842 gives the specifications for the ductile iron fittings to be used with PVC-U and PE pipes.
  • prEN ISO 14532

    18-09-2015
    00238012

    Natural gas - Vocabulary

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard establishes the terms, definitions, symbols, and abbreviations used in the field of natural gas. The terms and definitions have been reviewed and studied in order to cover all aspects of any particular term with input from other sources such as European Standards from CEN (The European Committee for Standardization), national standards, and existing definitions in the IGU Dictionary of the Gas Industry. The definitive intention of this document is to incorporate the reviewed definitions into the ISO/TC 193 source standards.
  • prEN ISO 14555 rev

    18-12-2015
    00121744

    Welding - Arc stud welding of metallic materials

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 14575 rev

    26-11-2015
    00189223

    Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a test method for screening the resistance of polymeric geosynthetic barriers to stress cracking. The test is applicable to polypropylene and polyethylene based products and to all other polymeric geosynthetic barriers which have a partially crystalline structure. The data are suitable for screening and determination of conformity but not for deriving performance data such as lifetime, unless supported by further evidence.
  • prEN 14585-1 rev

    04-04-2008
    00342014

    Corrugated metal hose assemblies for pressure applications - Part 1: Requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    This European Standard specifies the requirements for material, design, manufacturing, testing and documentation for corrugated metal hose assemblies for pressure applications for use with a maximum allowable pressure PS greater than 0,5 bar.
  • prCEN/TR 14585-2 rev

    04-04-2008
    00342015

    Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    This Technical Report gives guidance for: the implementation of EN 14585-1 by proposing a procedure to place these pressure hose assemblies on the market; appropriate conformity assessment procedures as described in the annex III of the EU Directive 97/23/EC for Pressure Equipment [1].
  • prEN 14592 rev

    12-05-2015
    00124149

    Timber structures - Dowel-type fasteners - Requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements and test methods for materials, geometry, strength, stiffness and durability aspects of dowel-type fasteners for use in load bearing timber structures. Dowel-type fasteners for timber structures are taken to be nails, staples, screws, dowels, and bolts with nuts. Only dowel-type fasteners manufactured from steel are covered by this European Standard. Fasteners may be coated for corrosion protection, lubricants or withdrawal enhancement.
  • prEN 14593-1 rev

    30-11-2015
    00079163

    Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with a full face mask - Requirements, testing, marking

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies minimum requirements for compressed air line breathing apparatus with demand valve for use with a full face mask as a respiratory protective device. Escape and diving apparatus and apparatus used in abrasive blasting operations without additional protective features are not covered by this document, although certain requirements addressing the use in conjunction with escape apparatus and escape conditions are given. Laboratory and practical performance tests are included for the assessment of conformance to the requirements.
  • prEN 14594 rev

    30-11-2015
    00079162

    Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies minimum requirements for continuous flow compressed air line breathing devices for use with a full face mask, half mask, hood, helmet or suit, and devices used in abrasive blasting operations, as a Respiratory Protective Device (RPD). Escape RPD and diving apparatus are not covered by this European Standard. Laboratory and practical performance tests are included for the assessment of conformance to the requirements.
  • prEN ISO 14597 rev

    24-05-2014
    00019485

    Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 14600 rev

    22-04-2011
    00033430

    Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    This European Standard identifies the particular requirements and classifications necessary to demonstrate the characteristics of fire resistance, smoke leakage control and self closing durability for pedestrian doorsets, industrial type doorsets and openable windows. Requirements for performance characteristics for these products can be found in the appropriate product standards. This document does not cover any component reliability or durability testing of mechanical heat detectors (e.g. fusible link devices). The requirements relating to the use of alternative items of building hardware are provided.
  • prEN ISO 14607 rev

    18-10-2013
    00285118

    Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2007)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 14620-1 rev

    31-10-2014
    CST02166

    Space systems - Safety requirements - Part 1: System safety

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 14636-2 rev

    22-07-2011
    00155767

    Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies units made from polyester resin concrete (PRC, see 3.1.18), and their joints, for the construction of inspection chambers with inverts not exceeding 2 m deep and for manholes, intended to be used within a drain or sewer system operating without pressure. It applies to products for use outside buildings in buried installations to be installed by open-trench techniques. This document applies to nominal sizes from DN 600 to DN 3000 for chamber rings and shaft rings having a circular shape. The intended use of these products is to provide access to buried drain or sewer systems for the conveyance of wastewater, i.e. sewage, rainwater and surface water, at temperatures up to 50 °C, without pressure or occasionally at a head of pressure up to 0,5 bar ), and installed in areas subjected to vehicle and/or pedestrian traffic and outside buildings. NOTE 1 The attention of readers is drawn to applicable requirements contained in EN 476. This standard specifies definitions, requirements and characteristics of units and their joints for the construction of manholes and inspection chambers, of materials, test methods, marking and evaluation of conformity. The units are classified on the basis of its type and the type of structure they are intended to be used. NOTE 2 It is the responsibility of the purchaser or specifier to make the appropriate selections, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
  • prEN 14637 rev

    23-07-2010
    00033404

    Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies requirements, methods of test and performance criteria against which the compatibility of components and their performance can be assessed when used in combination to form an electrically controlled hold-open system. It also specifies requirements for the integrity of such hold-open systems when connected to fire detection and fire alarm systems or other systems, including the signal exchange and technical data for interfaces. This European Standard provides requirements for the application of electrically controlled hold-open systems used for fire/smoke doors in buildings, where such doors are required to be self-closing. It covers planning, design (see Annex A), installation (see Annex B), commissioning, use and maintenance (see Annex E) of hold-open systems, intended for the protection of life and/or the protection of property. This may also include hold-open systems, or components of the hold-open system, that are self-contained in a single enclosure. Electrically controlled hold-open systems manufactured, installed and serviced in accordance with this European Standard are recommended for use wherever there is a requirement for reliable hold-open and release of an individual self-closing fire/smoke door assembly in the case of fire. The use of hold-open systems for closures in conveyor systems conforming to EN 1366-7, which applies in conjunction with EN 1363-1, may require additional proof of suitability, which is not covered by this European Standard. This European Standard does not cover design, installation, commissioning, use and maintenance of building fire detection and fire alarm systems (covered by CEN/TS 54-14) but does cover the connection of hold-open systems conforming to this European Standard to building fire detection and fire alarm systems, under certain prescribed conditions. This European Standard does not cover the requirements of performance characteristics and operational environment conditions of part
  • prEN ISO 14644-13

    22-02-2013
    00243025

    Cleanrooms and associated controlled environments - Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This part of ISO 14644 addresses the cleaning (removal of contaminants) to a specified degree on cleanroom surfaces, surfaces of equipment in the cleanroom and surfaces of materials in the cleanroom. The following are excluded from this document: - product and process cleaning; - cleaning of microbiological contamination; - detailed cleaning methods and procedures. This part of ISO 14644 provides guidance about different cleaning techniques, classified, e.g. as wet/dry and physical/chemical. This part of ISO 14644 provides guidance on which methods should be used for achieving required Surface cleanliness by particle concentration (SCP) and Surface cleanliness by chemical concentration (SCC) classes and which techniques should be considered to achieve these specified levels. The efficacy of cleaning techniques makes reference to the cleanliness classes and associated test methods found in ISO 14644-8, -9 and -10. The following matters of general guidance are provided: - assessment of adverse effects such as health and safety considerations, surface/material properties; - compatability of surfaces with the cleaning technique, - surface attributes such as morphology; - configurations such as crevices, holes and cracks, - waste and effluent - suitability of cleaning agents and materials (e.g. purity, cleanliness, properties)
  • prEN ISO 14644-15

    10-12-2013
    00243030

    Cleanrooms and associated controlled environments - Part 15: Assessment of suitability for use of equipment and materials by airborne chemical and surface chemical concentration

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 14644-16

    24-07-2015
    00243027

    Cleanrooms and associated controlled environments - Part 16: Code of practice for improving energy efficiency in cleanrooms and clean air devices

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This standard gives recommendations on reducing energy consumption and maintaining energy efficiency in new and existing cleanrooms and clean air devices, as classified by EN ISO 14644-1.