Velkommen til portalen for nye arbejdsemner

3465 Hits

ISO/TC 147/SC 3/WG 1

  • prEN 15000 rev

    26-11-2010
    00150058

    Safety of industrial trucks - Self-propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies the technical requirements, verification and test procedure for the longitudinal load moment indicators (LLMI) and longitudinal load moment control (LLMC) systems operating in the forward direction for self propelled variable reach trucks covered by EN 1459. This standard completes the requirements of clause 5.8.4 Longitudinal stability of EN 1459. The LLMI has been designated by the words longitudinal safety warning devices in EN 1459. This standard covers LLMI and LLMC systems for stationary trucks performing loading or placing functions on consolidated, stable and level ground. This standard does not cover the risk due to lateral instability, or instability due to the travelling of the truck. The LLMI and LLMC are not intended for warning of the overturning risk whilst the truck is travelling. NOTE: Acknowledging that, at the time of publication, the requirements included in this standard do not represent the state of the art, a transition period of 24 months is permitted after the date of publication, such that manufacturers can develop their products sufficiently to meet the requirements of this standard.
  • prEN 15001-1 rev

    11-01-2016
    00234078

    Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies detailed functional requirements for the design, selection of materials, construction, inspection and testing of industrial gas installation pipework and assemblies with an operating pressure greater than 0,5 bar, and non industrial gas installation pipework (residential and commercial) with an operating pressure greater than 5 bar in buildings, starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This standard also covers the inlet connection to the gas appliance comprising of the pipework that does not fall within the scope of the appliance standard. NOTE – The use of the term installation and pipework is interchangeable. This standard applies to gas installations operating at ambient temperatures between – 20 °C and 40 °C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should additionally be made to EN 13480 for metallic pipework. For industrial gas installations up to and including 0,5 bar and for non industrial (residential and commercial) gas installations up to and including 5 bar in buildings, EN 1775 applies. For gas installations that do not fall within the scope of EN 1775 or other European Standards, this standard applies. In this standard, the term “gas“ refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar absolute atmospheric pressure (normal conditions). These gases are commonly referred to as manufactured gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family gases (see Table 1 of EN 437:2003). The given values are considered as normal conditions for all volumes given in this standard.
  • prEN 15001-2 rev

    11-01-2016
    00234077

    Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies detailed functional requirements for the commissioning, operation and maintenance of • industrial gas installations and assemblies with an operating pressure greater than 0,5 bar and of • non-industrial installations (residential and commercial) with an operating pressure greater than 5 bar, starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This European Standard also covers the inlet connection to the gas appliance comprising of the pipework that does not fall within the scope of the appliance standard. This standard applies to gas installations operating at ambient temperatures between –20 °C and 40 °C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should additionally be made to EN 13480 for metallic pipework. For industrial gas installations up to and including 0,5 bar and for non-industrial (residential and commercial) gas installations up to and including 5 bar EN 1775 applies. For gas installations that do not fall within the scope of EN 1775 or other European Standards, this European Standard applies. In this European Standard, the term “gas“ refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar absolute atmospheric pressure. These gases are commonly referred to as manufactured gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family gases (see table 1 of EN 437:2003). LPG storage vessels (including all ancillaries fitted directly to storage vessels) are excluded. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure (e.g. between the storage vessel and its pressure regulator). In this European Standard, all pressures are gauge pressures unless otherwise stated. For gas installations within the scope of this standard, national legisl
  • prEN 15004-1 rev

    26-02-2016
    00191289

    Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2015, modified)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of gaseous fire fighting systems in buildings, plants or other structures, and the characteristics of the various extinguishants and types of fire for which they are a suitable extinguishing medium. It covers total flooding systems primarily related to buildings, plants and other specific applications, utilizing electrically non-conducting gaseous fire extinguishants that do not leave a residue after discharge and for which there are sufficient data currently available to enable validation of performance and safety characteristics by an appropriate independent authority. This document is not applicable to explosion suppression. This document is not intended to indicate approval of the extinguishants listed therein by the appropriate authorities, as other extinguishants may be equally acceptable. CO2 is not included as it is covered by other International Standards. This document is applicable to the extinguishants listed in Table 1. It is intended to be used in conjunction with the separate parts of EN 15004 for specific extinguishants, as cited in Table 1.
  • prEN 15004-10 rev

    01-03-2016
    00191294

    Fixed firefighting systems — Gas extinguishing systems — Part 10: Physical properties and system design of gas extinguishing systems for IG-541 (ISO 14520-15:2015, modified)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    1.1 This part of EN 15004 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-541 extinguishant. It includes details of physical properties, specification, usage and safety aspects. 1.2 This part of EN 15004 covers systems operating at nominal pressures of 150 bar, 200 bar and 300 bar at 15 °C. This does not preclude the use of other systems, although design data for other pressures are not available at this time.
  • prEN 15004-2 rev

    26-02-2016
    00191291

    Fixed firefighting systems - Gas extinguishing systems - Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 (ISO/DIS 14520-5:2014, modified)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document gives specific requirements for gaseous fire-extinguishing systems, with respect to the FK-5-1-12 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at nominal pressures of 25 bar and 42 bar with nitrogen propellant. This does not preclude the use of other systems.
  • prEN 15004-3 rev

    26-02-2016
    00191290

    Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-541 (ISO 14520-15:2015, modified)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document gives specific requirements for gaseous fire-extinguishing systems, with respect to the HCFC Blend A extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at nominal pressures of 25 bar and 42 bar with nitrogen propellant. This does not preclude the use of other systems.
  • prEN 15004-4 rev

    26-02-2016
    00191292

    Fixed firefighting systems - Gas extinguishing systems - Part 3: Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant (ISO/DIS 14520-6:2014, modified)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 125 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at nominal pressures of 25 bar and 42 bar, superpressurized with nitrogen. This does not preclude the use of other systems.
  • prEN 15004-5 rev

    26-02-2016
    00191288

    Fixed firefighting systems - Gas extinguishing systems - Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant (ISO/DIS 15420-9:2014, modified)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 227ea extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at nominal pressures of 25 bar and 42 bar with nitrogen propellant. This does not preclude the use of other systems.
  • prEN 15004-6 rev

    01-03-2016
    00191295

    Fixed firefighting systems — Gas extinguishing systems — Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant (ISO/DIS 14520-10:2014, modified)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 15004 contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 23 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at a nominal pressure of 41 bar without nitrogen superpressurization and 70 bar superpressurized with nitrogen.
  • prEN 15004-7 rev

    01-03-2016
    00191296

    Fixed firefighting systems — Gas extinguishing systems — Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2015, modified)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    1.1 This part of EN 15004 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-01 extinguishant. It includes details of physical properties, specification, usage and safety aspects. 1.2 This part of EN 15004 covers systems operating at nominal pressures of 160 bar, 200 bar and 300 bar at 15 °C. This does not preclude the use of other systems, although design data for other pressures are not available at this time.
  • prEN 15004-8 rev

    01-03-2016
    00191297

    Fixed firefighting system — Gas extinguishing systems — Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2015, modified)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    1.1 This part of EN 15004 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-100 extinguishant. It includes details of physical properties, specification, usage and safety aspects. 1.2 This part of EN 15004 covers systems operating at nominal pressures of 200 bar at 15 °C and 300 bar at 15 °C. This does not preclude the use of other systems, although design data for other pressures are not available at this time.
  • prEN 15004-9 rev

    01-03-2016
    00191293

    Fixed firefighting system — Gas extinguishing systems — Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2015, modified)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    1.1 This part of EN 15004 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-55 extinguishant. It includes details of physical properties, specification, usage and safety aspects. 1.2 This part of EN 15004 covers systems operating at nominal pressures of 150 bar at 15 °C, 200 bar at 15 °C and 300 bar at 15 °C. This does not preclude the use of other systems, although design data for other pressures are not available at this time.
  • prEN ISO 15005 rev

    23-06-2015
    00278402

    Road vehicles -- Ergonomic aspects of transport information and control systems -- Dialogue management principles and compliance procedures

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 15007 rev

    05-02-2015
    00261437

    Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the dimensions of two and three-piece tinplate aerosol containers with nominal brimful capacities in accordance with European Directive 80/232/EEC [2].
  • prEN ISO 15008 rev

    21-09-2012
    00278345

    Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 15011-4 rev

    06-08-2015
    00121724

    Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 4: Fume data sheets

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 15012-3

    17-12-2015
    00121737

    Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-gun welding fume extraction devices

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This part of ISO 15012 defines a laboratory method for measuring the welding fume capture efficiency of ongun extraction systems. It is applicable to integrated on-gun systems and to systems where a discrete extraction system is attached to the welding torch close to the arc area. The methodology is suitable for use with all continuous wire welding processes, all material types and all welding parameters. The method can be used to evaluate the effects of variables such as extraction flow rate, extract nozzle position, shielding gas flow rate, welding geometry, welding torch angle, fume emission rate etc. on capture efficiency but can also be used, with specific test conditions, to determine capture efficiency.
  • prEN ISO 15023-1 rev

    29-11-2013
    00249874

    Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 15023-2 rev

    05-12-2015
    00249944

    Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 15024-2 rev

    01-12-2014
    00133232

    Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometry method (FAAS)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of this European Standard specifies a flame atomic absorption spectrometric method (FAAS) for the determination of the zinc content of copper and copper alloys in the form of unwrought, wrought and cast products. The method is applicable to products having zinc mass fractions between 0,000 5 % and 6,0 %.
  • prEN 15026 rev

    16-02-2016
    00089182

    Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies the equations to be used in a simulation method for calculating the non steady transfer of heat and moisture through building structures. It also provides a benchmark example intended to be used for validating a simulation method claiming conformity with this standard, together with the allowed tolerances. The equations in this standard take account of the following storage and one-dimensional transport phenomena: - heat storage in dry building materials and absorbed water; - heat transport by moisture-dependent thermal conduction; - latent heat transfer by vapour diffusion; - moisture storage by vapour sorption and capillary forces; - moisture transport by vapour diffusion; - moisture transport by liquid transport (surface diffusion and capillary flow). The equations described in this standard account for the following climatic variables: - internal and external temperature; - internal and external humidity; - solar and longwave radiation; - precipitation (normal and driving rain); - wind speed and direction. The hygrothermal equations described in this standard shall not be applied in cases where: - convection takes place through holes and cracks; - two-dimensional effects play an important part (e.g. rising damp, conditions around thermal bridges, effect of gravitational forces); • hydraulic, osmotic, electrophoretic forces are present; daily mean temperatures in the component exceed 50 °C.
  • EN 15051-2:2013/prA1

    30-10-2015
    00137069

    Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the rotating drum test apparatus and associated test method for the reproducible production of dust from a bulk material under standard conditions, and the measurement of the inhalable, thoracic and respirable fractions of this dust, with reference to existing European Standards, where relevant (see Clause 6). This method is suitable for general bulk material handling processes, including all those processes where the bulk material is dropped, or can be dropped. It differs from the continuous drop method presented in EN 15051 3 in this European Standard, the same bulk material is repeatedly dropped, while in EN 15051 3, the bulk material is dropped only once, but continuously. Furthermore, this European Standard specifies the environmental conditions, the sample handling and analytical procedures, and the method of calculating and presenting the results. A classification scheme for dustiness is specified, to provide a standardised way to express and communicate the results to users of the bulk materials. This European Standard is applicable to powdered, granular or pelletised bulk materials. A standard sample volume is used. This European Standard is not applicable to test the dust released when solid bulk materials are mechanically reduced (e.g. cut, crushed) or to evaluate handling procedures for the bulk materials.
  • prEN 15085-2 rev

    26-10-2017
    00256732

    Railway applications – Welding of railway vehicles and components – Part 2: Quality requirements and certification of welding manufacturer

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts. This part of the series defines the certification levels as well as the requirements for welding manufacturers and describes the procedure for the recognition of welding manufacturers.
  • prEN 15088 rev

    23-12-2014
    00132293

    Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery"

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements for semi-finished products and castings of aluminium and aluminium alloys for load-bearing structural construction works (Construction works covers building and civil engineering works). It also specifies requirements for evaluation of conformity and the test methods to be used. It does not apply to products after machining or joining operations (e.g. bolting, welding of elements), which can be found in other European Standards, e.g. prEN 1090-1