Velkommen til portalen for nye arbejdsemner

3479 Hits

ISO/TC 69/SC 4/WG 11

  • prEN 15685

    02-06-2015
    00033500

    Building hardware - Locks and latches – Multipoint locks and their locking plates - Requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements and test methods for durability, strength, security and functionality of mechanically operated multipoint locks and their locking plates for use in doors in buildings. This European Standard covers multipoint locks which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and subsequently placed on the market as a kit in a single transaction. This standard specifies Multipoint locks and locking systems intended for use in different environmental and security conditions, thus necessitating different grades. This European standard does not specify single point locks or their locking plates which are specified by EN 12209. This standard specifies the dimensions and properties required for security and for the assessment of smoke door suitability. This European standard is not applicable to cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks. Assessment of the contribution of the product to the fire resistance of specific fire/smoke resisting door assemblies is beyond the scope of this European Standard.
  • prEN 15731-1

    25-02-2015
    00338068

    Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at adapted hydration - Part 1: For industrial flours

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This document specifies a method that uses an alveograph to determine the rheological properties of different types of dough at adapted hydration obtained from "soft" to "hard" wheat flour (Triticum aestivum L.) produced by industrial milling
  • prEN ISO 15747 rev

    27-01-2016
    CSS03010

    Plastic containers for intravenous injections

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 15753 rev

    06-08-2015
    00307162

    Animal and vegetable fats and oils -- Determination of polycyclic aromatic hydrocarbons

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 15780 rev

    25-11-2015
    00156229

    Ventilation for buildings - Ductwork - Cleanliness of ventilation systems

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    Revision of EN 15780: This European Standard applies to both new and existing ventilation and air conditioning systems and specifies the assessment criteria of cleanliness, cleaning procedures of these systems, and the validation of the effectiveness of cleaning applies also to products, which conform to EN 1505, EN 1506, EN 13053, EN 13180 and EN 13403, used in air conditioning and ventilation systems for human occupancy defined in the scope of CEN/TC 156. This European Standard does not apply to installations for industrial processes. Cleanliness of ventilation systems is considered important for human comfort and health, energy consumption, system service life and for cleanliness of operations or processes carried out in the ventilated area. Considerations for change of component as an alternative for cleaning (e.g. in case of flexible ducts and air filters) are also included. This European Standard specifies general requirements and procedures necessary in assessing and maintaining the cleanliness of ducted ventilation, including: - cleanliness quality classification; - how to assess the need for cleaning (visual, measurements); - assessment frequency (general guidance); guidance of system inspections in accordance with EN 15239, and EN 15240 when relevant; - selection of cleaning method – to be in line with handing over documentation according to EN 12599; - how to assess the result of cleaning. This European Standard is a parallel standard to EN 12097, which specifies requirements for dimension, shape and location for access panels for cleaning and service in ductwork systems. This European Standard is made as an umbrella standard with informative annexes that can be revised, completed and further added in future revisions of this European Standard for specific system types, and products or applications in the system, such as: - Air Handling Units (AHU); - filter; - humidifiers; - heat recovery units; - decentralised air treatment units such as fan-coil units, indu
  • prEN ISO 15797 rev

    22-10-2013
    00248557

    Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2002)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • EN ISO 15798:2013/prA1

    29-05-2015
    00170278

    Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2013)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 15860 rev

    30-10-2014
    00249899

    Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    See title
  • EN ISO 15874-2:2013/prA1

    13-09-2013
    00155806

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • EN ISO 15874-3:2013/prA1

    13-09-2013
    00155807

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • EN ISO 15874-5:2013/prA1

    03-10-2014
    00155823

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prCEN ISO/TS 15874-7

    31-03-2017
    00155904

    Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    ISO/TS 15874-7:2003 gives guidance for the assessment of conformity to be included in the manufacturer's quality plan as part of the manufacturer's quality system. It includes: requirements for materials, components, joints and assemblies given in the applicable part(s) of ISO 15874; requirements for the manufacturer's quality system; definitions and procedures to be applied if third-party certification is involved. In conjunction with the other parts of ISO 15874, ISO/TS 15874-7 is applicable to polypropylene (PP) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the class of application.
  • prEN 15876-1 rev

    17-09-2015
    00278406

    Electronic fee collection - Conformity evaluation of on-board and roadside equipment to EN 15509 - Part 1: Test suite structure and test purposes

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard contains the Test Suite Structure (TSS) and Test Purposes (TP) to evaluate the conformity of On Board Units (OBU) and Roadside Equipment (RSE) to EN 15509. The objective of this document is to provide a basis for conformance tests for DSRC equipment (on board units and roadside units) to support interoperability between different equipment supplied by different manufacturers.
  • prEN 15876-2 rev

    17-09-2015
    00278407

    Electronic fee collection - Conformity evaluation of on-board and roadside equipment to EN 15509 - Part 2: Abstract test suite

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the Abstract Test Suites (ATSs) to evaluate the conformity of On Board Equipment (OBE) and Roadside Equipment (RSE) to EN 15509. The objective of the present document is to provide a basis for conformance tests for DSRC equipment (on board units and roadside units) to support interoperability between different equipment supplied by different manufacturers.
  • prEN ISO 15877-7

    31-03-2017
    00155902

    Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2009)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    ISO 15877-7:2009 gives guidance for the assessment of conformity included in the manufacturer's quality plan as part of his/her quality system. ISO 15877-7:2009 includes: - provisions for materials, components, joints and assemblies given in the applicable part(s) of ISO 15877; - provisions for the manufacturer's quality system, which can conform to ISO 9001; - definitions and procedures applied if certification is involved; in which case, the certification body can be accredited to ISO/IEC Guide 65 or ISO/IEC Guide 62, as applicable. In conjunction with the other parts of ISO 15877, ISO 15877-7:2009 is applicable to chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems), under design pressures and temperatures appropriate to the class of application (see Table 1 of ISO 15877-1:2009).
  • prEN 15879-2

    28-05-2009
    00113050

    Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 2 : Direct condensation heat pump

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies the terms and definitions, test conditions, test procedures and requirements for the rating and performance of direct condensation with electrically driven compressors, used for space heating and/or cooling. Brine can be used instead of water. Direct exchange-to-air ground coupled heat pumps are covered by EN XXX Part 2. This European standard applies to factory-made units. In the case of units consisting of several parts, this standard applies only to those designed and supplied as a complete package. This standard does not apply to units using transcritical cycles, e.g. with CO2 as refrigerant
  • prEN 15882-3 rev

    13-04-2015
    00127322

    Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The purpose of this European Standard is to provide the principles and guidance for the preparation of extended application documents for penetration sealing systems tested in accordance with EN 1366-3. The field of the extended application document is additional to the direct field of application given within EN 1366-3 and may be applied to or based on a single test, or a number of tests, which provide the relevant information for the formulation of an extended application. It should be noted that this European Standard provides general guidance on the likely effects of a change. It gives no guidance as to the magnitude, nor how this magnitude is evaluated. Composite pipes comprising both metallic and plastics components are not covered by this European Standard.
  • prEN 15882-5

    10-08-2015
    00127328

    Extended application of results from fire resistance tests for service installations - Part 5: Kitchen extract ducts

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    Extended application of results from fire resistance tests for service installations – Kitchen extract ducts.
  • prEN ISO 15883-1 rev

    12-02-2016
    00102144

    Washer-disinfectors - Part 1: General requirements, terms and definitions and tests

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 15883-4 rev

    16-07-2013
    00102125

    Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes (ISO 15883-4:2008)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 15883-5

    12-08-2015
    00102140

    Washer disinfectors - Part 5: Performance requirements and test method criteria for demonstrating cleaning efficacy

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • EN 15885:2010/prA1

    02-05-2014
    00165252

    Classification and characteristics of techniques for on line rehabilitation of drains and sewers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a system for the classification of on line rehabilitation drains and sewers outside buildings, operated under gravity or pressure, including pipes, connections and manholes. It is applicable to repair, renovation and replacement activities on the line of existing drain and sewer. NOTE Replacement off the line of existing drains and sewers is covered by EN 1610 and EN 12889.
  • prEN 15887

    02-06-2015
    00033501

    Building hardware - Uncontrolled Door Closing Devices for single action doors - Requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Standard specifies requirements and test methods for uncontrolled door closing devices, such devices being intended for fitting either singly, in multiples, or in combination with hinges. The Scope is limited to manually-operated, uncontrolled door closing devices for internal pedestrian door sets with single door leafs and with single action function. The energy for closing is generated by the user upon opening the door to at least 30 °, such that when the door is released, it returns to a closed position in an uncontrolled manner. NOTE 1 Controlled door closing devices are covered by EN 1154. Design samples in accordance with EN 1154. Annex C, Figure C1 are not considered as being uncontrolled door closing devices. NOTE 2 Design samples of uncontrolled door closing devices are shown in Annex F. Uncontrolled door closing devices with double action function are excluded from the scope of this Standard. This Standard also covers uncontrolled door closing devices which contain simple damping mechanisms without provision for adjusting (e.g. valves) the closing speed of the door leaf. This Standard also covers uncontrolled door closing devices incorporated in single axis hinges where, in addition to providing a closing function, the devices may also support the door leaf. Such spring hinges may be either load bearing or non-load bearing. Uncontrolled door closing devices manufactured in accordance with this Standard are recommended for use only on doors up to 1000 mm in width and 80 kg in mass and where users are expected to take care during operation. Uncontrolled door closing devices are intended for use on doors in buildings where there is a low frequency of use by people with a high incentive to exercise care and with a small chance of accidents occurring or misuse (e.g. domestic, housing or other living areas). The application of uncontrolled door closing devices manufactured in accordance with this Standard may be limited by national legislation.
  • EN 15895:2011/prA1

    28-04-2015
    00213004

    Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European standard covers safety requirements for cartridge operated fixing and hard marking tools which operate with an intermediate member (piston). This European standard deals with all significant hazards, hazardous situations and events relevant to cartridge operated fixing and hard marking tools, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4). It deals with the significant hazards in the different operating modes and intervention procedures as referred to in EN ISO 12100-1:2003, 5.3. Although the safe use of cartridge operated tools depends to an important extent on the use of appropriate cartridges and fasteners, this standard is not formulating requirements for the cartridges and fasteners to be used with the tools (see Clause 7). This European Standard applies to tools designed for use with cartridges with casings made of metal or plastic and with solid propellant and containing a minor quantity of primer with a composition different from that of the main propellant. The fixing tools in the scope are those intended for use with fasteners made from metal. NOTE Information about cartridges can be found in the publication of the Permanent International Commission for the Proof of Small Arms (C.I.P.). This European standard is not applicable to cartridge operated fixing and hard marking tools which are manufactured before the date of its publication as EN.
  • prEN ISO 15952 rev

    05-11-2015
    00345085

    Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget