Velkommen til portalen for nye arbejdsemner

3469 Hits

CEN/TC 226

  • prEN ISO 16812 rev

    21-05-2010
    00012273

    Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • ISO/NP TS 16843-1

    17-02-2015
    069406

    Health Informatics -- Categorial structures for representation of acupuncture-- Part 1: Acupuncture points

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
  • CWA 16971

    18-11-2015
    WSGIT002

    Draft CEN Workshop Agreement: Global eBusiness Interoperability Test Bed (GITB) Phase 3: Implementation Specifications and Proof-of-Concept

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • FprCEN/TR 16978

    16-12-2015
    00256729

    Railway applications - Infrastructure - Survey on isolated defects

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    European survey on isolated defects.
  • prEN 16990

    13-01-2016
    00354004

    Non-type approved light motorized vehicles for the transportation of persons and goods and related facilities - Side by Side Vehicles – safety requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard applies to “Side by Side machines” or “SbSs” as defined in Clause 3, propelled by internal combustion engines using liquid fuels (petrol, diesel, bio-fuels, lpg) and/or electric drive, intended to be used primarily on unpaved surfaces and not intended to be used on public roads ). This European Standard defines safety requirements relating to the elements of design, operation, and maintenance of Side by Side machines and deals with all significant hazards, hazardous situations and events relevant to Side by Side machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It deals with the significant hazards during the whole lifecycle of the product as defined in 5.3 of EN ISO 12100-1:2010 This European Standard is not dealing with:  side by Side Machines exclusively intended for competition );  side by side machines intended to be used by persons under the age of 14 years;  agricultural and forestry tractors coming under Regulation (EU)167/2013;  3 or 4 wheeled vehicles coming under Regulation (EU)168/2013;  accessories for additional functions );  the additional hazards due to the use of the Side by Side Machine on public roads;  the additional hazards due to the use of remote control. This document is not intended to cover all terrain machines (ATVs) complying with EN 15997. This European Standard is not applicable to Side by Side machines which are manufactured before the date of its publication as EN.
  • prEN ISO 16993

    30-10-2015
    00335135

    Solid biofuels - Conversion of analytical results from one basis to another

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 16996

    11-01-2013
    00335110

    Solid biofuels - Determination of elemental composition by X-ray fluorescence

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This international standard specifies the procedure for a determination of major and minor element concentrations in biomass material by energy dispersive X-ray fluorescence (EDXRF) spectrometry or wavelength dispersive X-ray fluorescence (WDXRF) spectrometry using a calibration with biomass reference materials. A semi-quantitative determination may be carried out using matrix independent standards). This international standard is applicable for the following elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Br, Mo, Cd, Sb, and Pb. Concentrations from approximately 0,0001 % and above can be determined depending on the element, the calibration materials used and the instrument used.
  • prEN 17019-2

    15-03-2016
    CSF05028

    Weigh-in-Motion of road vehicles - Part 2: Simplified requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO/IEC 17030 rev

    13-07-2019
    JT001070

    Conformity assessment – General requirements for third-party marks of conformity

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 17069

    22-08-2016
    00256670

    Railway applications – Systems and procedures for change of track gauge. Part 1: Automatic Variable Gauge Systems

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document defines the interfaces and gives guidance for the design of systems and procedures for change of track gauge, covering also their assessment for technical approval, for the automatic variable-gauge systems. The standard is focused on the change of track gauge among the following nominal track gauges: 1 435 mm, 1 520 mm, 1 524 mm, 1 600 mm and 1 668 mm. This document is not limited to the aforementioned nominal track gauges but the interfaces to change to/from other nominal track gauges can be different. The established assessment procedures can be used as well.
  • ISO/NP TS 17104

    20-04-2015
    069068

    Rotary tool for threaded fasteners-- Hydraulic impulse tools -- Performance test method

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 17107

    19-06-2019
    JT005166

    Space data and information transfer systems – XML specification for navigation data messages

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This Recommended Standard is applicable only to the schema content and layout, and to instantiations of the schema, but not to the transmission of any instantiation of the schema. The potential for compression/decompression of the message is an aspect of the transmission that is not part of this specification. The means of transmission of an XML-formatted NDM between agencies is beyond the scope of this document; such arrangements require specification via other arrangements, for example, in an Interface Control Document (ICD). Transmission of an XML-formatted NDM could be based on a future CCSDS real-time data transfer service, a file-based transfer protocol such as SFTP, streaming media, email, or services provided via the World Wide Web and XML-compatible Web browsers. In general, it is a requirement that the transmission mechanism not place constraints on the technical data content of an NDM
  • prEN 17124 rev

    06-03-2019
    00268073

    Hydrogen fuel – Product specification and quality assurance – Proton exchange membrane (PEM) fuel cell applications for road vehicles

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.
  • prEN ISO 17201-1 rev

    03-07-2014
    00211171

    Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 17201-2 rev

    03-07-2014
    00211172

    Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 17201-3 rev

    29-09-2015
    00211182

    Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 17225-8

    21-02-2014
    00335123

    Solid biofuels -- Fuel specifications and classes -- Part 8: Thermally treated and densified biomass fuels

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standards determines the fuel quality classes and specifications of graded pellets and briquettes made from thermally treated biomass for non-industrial and industrial use. This International Standard covers fuels produced from the following raw materials (see ISO 17225–1, Table 1): 1.1 Forest, plantation and other virgin wood 1.2 By-products and residues from wood processing industry 2.1 Herbaceous biomass from agriculture and horticulture 2.2.1 By-products and residues from food and herbaceous processing industry, chemically untreated herbaceous residues 3.1 Orchard and horticulture fruit 3.2.1 By-products and residues from food and fruit processing industry, chemically untreated fruit residues 4. Aquatic biomass
  • CEN/TS 17227

    28-09-2017
    00409004

    Beauty salon services – Advanced beauty treatments for use with EN 16078:2017

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prCEN ISO/TS 17251

    12-08-2011
    00251262

    Health Informatics - Business requirements for a syntax to exchange structured dose information for medicinal products

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • EN ISO 17262:2012/prA1

    01-09-2014
    00278385

    Intelligent transport systems - Automatic vehicle and equipment identification - Numbering and data structures - Amendment 1

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • EN ISO 17264:2009/prA1

    01-09-2014
    00278386

    Intelligent transport systems - Automatic vehicle and equipment identification - Interfaces - Amendment 1

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 17268

    18-06-2015
    00268065

    Gaseous hydrogen land vehicle refuelling connection devices

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This International Standard defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors. GHLV refuelling connectors consist of the following components, as applicable: — receptacle and protective cap (mounted on vehicle); — nozzle. This International Standard applies to refuelling connectors which have working pressures of 11 MPa, 25 MPa, 35 MPa and 70 MPa, hereinafter referred to in this International Standard as the following: — H11 – 11 MPa at 15 °C; — H25 – 25 MPa at 15 °C; — H35 – 35 MPa at 15 °C; — H35HF – 35 MPa at 15 °C (high flow for commercial vehicle applications); — H70 – 70 MPa at 15 °C. Nozzles and receptacles that meet the requirements of this International Standard will only allow GHLVs to be filled by fuelling stations dispensing hydrogen with nominal working pressures equal to or lower than the vehicle fuel system working pressure. They will not allow GHLV to be filled by fuelling stations dispensing blends of hydrogen with natural gas. Refuelling connectors dispensing blends of hydrogen with natural gas are excluded from the scope of this International Standard. NOTE This International Standard can be used for certification purposes.
  • prEN ISO 17279-1

    27-08-2014
    00121696

    Welding - Micro joining of 2nd generation high temperature superconductors - Part 1: General requirements for the procedure

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard specifies terms and definitions, specification and qualification of 2G HTS joining procedure. A welding procedure specification (WPS) is needed to provide a basis for planning joining operations and for quality control during joining. Joining is considered as a special process in the terminology of standards for quality systems. Standards for quality systems usually require that special processes be carried out in accordance with written procedure specifications. This has resulted in the establishment of a set of rules for qualification of the joining procedure prior to the release of the WPS to actual production. This part of ISO 17279 defines these rules. This standard does not cover soldering, brazing or any fillers, which are currently available in the industry. This International Standard can be applied for joining of all kinds of 2G HTSs. This standard does not apply to 1st Generation Bismuth Strontium Calcium Copper Oxide (1G BSCCO) type HTS and Low Temperature Superconductor (LTS) Joining.
  • prEN ISO 17279-2

    27-08-2014
    00121694

    Welding - Micro joining of 2nd generation high temperature superconductors - Part 2: Qualification for welding and testing personnel

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard specifies the requirements for the qualification for welding and testing personnel of micro-joining of 2G HTS to fulfil the ISO 17279-1 and ISO 17279-3 requirements.
  • prEN ISO 17279-3

    27-08-2014
    00121695

    Welding - Micro joining of 2nd generation high temperature superconductors - Part 3: Test methods for joints

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard specifies a method for determining the capability of a manufacturer to use the 2G HTS joining process for the production of products of the specified quality. It also specifies quality requirements, but does not assign those requirements to any specific product group.