Velkommen til portalen for nye arbejdsemner

3474 Hits

ISO/TC 69/SC 4/WG 11

  • prEN 16623-5

    02-09-2015
    00139577

    Reactive (intumescent) coatings for fire protection of structural members - Part 5: Applied to timber based structural members

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard represents a supplement the proposed Part 1, and will specify specific requirements for reactive fire protection products, additional to those given in Part 1, that are applicable when a product is to be applied to structural members made from timber based material with the intention of providing those structural members with fire resistance performance.
  • prEN ISO 16624

    27-10-2015
    00338069

    Wheat flour and durum wheat semolina - Determination of the colour by reflectance diffused colorimetry

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This standard describes a method for the determination of the colour in durum wheat semolina and soft wheat flour by reflectance diffused colorimetry. The standard is suitable for semolina and flour obtained by experimental or industrial milling.
  • prEN 16652-2

    02-12-2015
    00286176

    LPG equipment and accessories - Automotive LPG vehicles workshops - Part 2: Personnel competence and training

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prCEN/TS 16663

    02-03-2015
    00038201

    Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a method for determining the leaching of active ingredients or other compounds from preservative treated wood by a semi field method for Use Class 3 (outdoor above ground). The preservative treated wood can be tested with or without subsequently surface coating or other water-repellent treatment. The method is applicable to the testing of commercial or experimental preservatives or paint systems applied to non-durable timber by methods appropriate to commercial practice.
  • prEN ISO 16664 rev

    16-12-2015
    CSN21082

    Gas analysis - Handling of calibration gases and gas mixtures - Guidelines

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 16712-4

    19-01-2016
    00192110

    Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam generators - Part 4: High expansion foam generators PN16

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    1.1 This document applies to high expansion foam generators, having an expansion ratio greater than 200:1, whose only source of external power is the pressure and/or flow of the water supply to the device, used by fire and rescue services and specifies their specification and test procedures. NOTE 1 – In this document, the term "foam generator" also refers to "high expansion foam generator". NOTE 2 – Examples of use are: ships engine rooms and bilges, underground car parks, tunnels, basements, chemical storage areas and storage tanks bunds. Some high expansion generators can also be used for smoke extraction or ventilation (see Annex A). 1.2 This document deals with all significant hazards, hazardous situations or hazardous events (see Annex B), with the exception of noise, relevant to high expansion foam generator, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. 1.3 This document is not applicable to high expansion foam generators which have been manufactured before its date of publication as EN.
  • prEN 16723-1

    10-12-2014
    00408006

    Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 1: Specifications for biomethane for injection in the natural gas network

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 16739

    15-01-2016
    00442002

    Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    ISO 16739:2013 specifies a conceptual data schema and an exchange file format for Building Information Model (BIM) data. The conceptual schema is defined in EXPRESS data specification language. The standard exchange file format for exchanging and sharing data according to the conceptual schema is using the Clear text encoding of the exchange structure. Alternative exchange file formats can be used if they conform to the conceptual schema. ISO 16739:2013 represents an open international standard for BIM data that is exchanged and shared among software applications used by the various participants in a building construction or facility management project. ISO 16739:2013 consists of the data schema, represented as an EXPRESS schema specification, and reference data, represented as definitions of property and quantity names and descriptions. A subset of the data schema and referenced data is referred to as a model view definition. A particular model view definition is defined to support one or many recognized workflows in the building construction and facility management industry sector. Each workflow identifies data exchange requirements for software applications. Conforming software applications need to identity the model view definition they conform to.
  • CEN/TS 16769:2015/prA

    02-12-2015
    00286175

    LPG equipment and accessories - Terminology

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 16771

    10-12-2014
    00256682

    Railway applications - Infrastructure - Aluminothermic welding of grooved rails

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard defines the laboratory tests and requirements for approval of an aluminothermic welding process using welds produced in workshop conditions. It applies to the joining of new, grooved rails as described in EN 14811 of the same profile and steel grade. Welding of construction profiles and machined profiles are not covered in this standard. Compliance with the requirements of this standard does not of itself ensure the suitability of a welding process for specific conditions of track and traffic. The standard does not cover welds made between different rail sections, worn rails or different rail grades. In addition to the definitive requirements this standard also requires the items detailed in Clause 4 to be documented. For compliance with this standard, it is important that both the definitive requirements and the documented items be satisfied.
  • prCEN/TS 16794-1 rev

    13-08-2015
    00278404

    Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The first edition of CEN TS16794 sets out the technical requirements to be met by PT contactless devices (PT readers or PT objects) hosting a transport ticketing application in order to be able to interface together using the ISO/IEC 14443 standard contactless communications protocol. The revised version shall update the existing requirements with new publications from ISO/IEC 14443 and EMVCo (where appropriate) in order to maintain and facilitate furthermore the convergence between ISO/IEC 14443, EMVCo Book D and CEN TS16794 specifications. This new version shall also address interoperability of consumer-market NFC mobile devices with before mentioned PT-specific devices. This shall be achieved based on NFC Forum Analog and Digital specifications for consumermarket NFC mobile devices and based on the revised version of CEN TS16794 for PT devices.
  • prCEN/TS 16794-2 rev

    01-09-2015
    00278405

    Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The first edition of CEN TS16794-2 test plan lists all the test conditions to be performed on a contactless reader or a contactless fare media in order to ensure that all the requirements specified in CEN/TS 16794-1 are met for the device under test. The revised version shall update the existing tests with new publications from ISO/IEC 14443 (and where appropriate EMVCo) in order to maintain and facilitate furthermore the convergence between ISO/IEC 14443, EMVCo Book D (where appropriate) and CEN TS16794-1 specifications. This new version shall also amend the existing test plan to address interoperability of consumer-market NFC mobile devices with before mentioned PT-specific devices. This shall be achieved based on NFC Forum Analog and Digital Test specifications for consumer-market NFC mobile devices and based on the revised version of CEN TS16794 for PT devices.
  • prEN ISO 16812 rev

    21-05-2010
    00012273

    Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • ISO/NP TS 16843-1

    17-02-2015
    069406

    Health Informatics -- Categorial structures for representation of acupuncture-- Part 1: Acupuncture points

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
  • CWA 16971

    18-11-2015
    WSGIT002

    Draft CEN Workshop Agreement: Global eBusiness Interoperability Test Bed (GITB) Phase 3: Implementation Specifications and Proof-of-Concept

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • FprCEN/TR 16978

    16-12-2015
    00256729

    Railway applications - Infrastructure - Survey on isolated defects

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    European survey on isolated defects.
  • prEN 16990

    13-01-2016
    00354004

    Non-type approved light motorized vehicles for the transportation of persons and goods and related facilities - Side by Side Vehicles – safety requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard applies to “Side by Side machines” or “SbSs” as defined in Clause 3, propelled by internal combustion engines using liquid fuels (petrol, diesel, bio-fuels, lpg) and/or electric drive, intended to be used primarily on unpaved surfaces and not intended to be used on public roads ). This European Standard defines safety requirements relating to the elements of design, operation, and maintenance of Side by Side machines and deals with all significant hazards, hazardous situations and events relevant to Side by Side machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It deals with the significant hazards during the whole lifecycle of the product as defined in 5.3 of EN ISO 12100-1:2010 This European Standard is not dealing with:  side by Side Machines exclusively intended for competition );  side by side machines intended to be used by persons under the age of 14 years;  agricultural and forestry tractors coming under Regulation (EU)167/2013;  3 or 4 wheeled vehicles coming under Regulation (EU)168/2013;  accessories for additional functions );  the additional hazards due to the use of the Side by Side Machine on public roads;  the additional hazards due to the use of remote control. This document is not intended to cover all terrain machines (ATVs) complying with EN 15997. This European Standard is not applicable to Side by Side machines which are manufactured before the date of its publication as EN.
  • prEN ISO 16993

    30-10-2015
    00335135

    Solid biofuels - Conversion of analytical results from one basis to another

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 16996

    11-01-2013
    00335110

    Solid biofuels - Determination of elemental composition by X-ray fluorescence

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This international standard specifies the procedure for a determination of major and minor element concentrations in biomass material by energy dispersive X-ray fluorescence (EDXRF) spectrometry or wavelength dispersive X-ray fluorescence (WDXRF) spectrometry using a calibration with biomass reference materials. A semi-quantitative determination may be carried out using matrix independent standards). This international standard is applicable for the following elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Br, Mo, Cd, Sb, and Pb. Concentrations from approximately 0,0001 % and above can be determined depending on the element, the calibration materials used and the instrument used.
  • prEN 17019-2

    15-03-2016
    CSF05028

    Weigh-in-Motion of road vehicles - Part 2: Simplified requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO/IEC 17030 rev

    13-07-2019
    JT001070

    Conformity assessment – General requirements for third-party marks of conformity

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 17069

    22-08-2016
    00256670

    Railway applications – Systems and procedures for change of track gauge. Part 1: Automatic Variable Gauge Systems

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document defines the interfaces and gives guidance for the design of systems and procedures for change of track gauge, covering also their assessment for technical approval, for the automatic variable-gauge systems. The standard is focused on the change of track gauge among the following nominal track gauges: 1 435 mm, 1 520 mm, 1 524 mm, 1 600 mm and 1 668 mm. This document is not limited to the aforementioned nominal track gauges but the interfaces to change to/from other nominal track gauges can be different. The established assessment procedures can be used as well.
  • ISO/NP TS 17104

    20-04-2015
    069068

    Rotary tool for threaded fasteners-- Hydraulic impulse tools -- Performance test method

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 17107

    19-06-2019
    JT005166

    Space data and information transfer systems – XML specification for navigation data messages

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This Recommended Standard is applicable only to the schema content and layout, and to instantiations of the schema, but not to the transmission of any instantiation of the schema. The potential for compression/decompression of the message is an aspect of the transmission that is not part of this specification. The means of transmission of an XML-formatted NDM between agencies is beyond the scope of this document; such arrangements require specification via other arrangements, for example, in an Interface Control Document (ICD). Transmission of an XML-formatted NDM could be based on a future CCSDS real-time data transfer service, a file-based transfer protocol such as SFTP, streaming media, email, or services provided via the World Wide Web and XML-compatible Web browsers. In general, it is a requirement that the transmission mechanism not place constraints on the technical data content of an NDM
  • prEN 17124 rev

    06-03-2019
    00268073

    Hydrogen fuel – Product specification and quality assurance – Proton exchange membrane (PEM) fuel cell applications for road vehicles

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.