Velkommen til portalen for nye arbejdsemner

3474 Hits

ISO/TC 69/SC 4/WG 11

  • prEN ISO 19736

    15-05-2015
    00055396

    Dentistry - Test method for the bonding test between polymer teeth and denture base polymer

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard specifies a test method for the shear strength between polymer teeth and denture base polymers. The bond test is carried out between polymer teeth and denture base polymer.
  • prEN ISO 19743

    03-06-2014
    00335129

    Solid biofuels - Determination of stone content

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard specifies a method for the determination of stone content of solid biofuels by the use of sink-and-float separation combined with elutriation. This International Standard is applicable to uncompressed solid biofuels, especially woody biomass (according to EN ISO 17225-1, Table 1), like wood chips and hog fuel.
  • prCEN ISO/TR 19838

    14-10-2015
    00392029

    Microbiology - Cosmetics - Guidelines for the application of ISO standards on Cosmetic Microbiology

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prCEN ISO/TS 19844 rev

    05-01-2016
    00251326

    Health informatics - Identification of medicinal products - Implementation guidelines for data elements and structures for the unique identification and exchange of regulated information on substances

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 19880-1

    18-06-2015
    00268064

    Gaseous hydrogen -- Fueling stations -- Part 1: General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    Minimum Safety Requirements for Hydrogen Fueling Stations for Land-Based Fuel Cell Electric Vehicles
  • prEN ISO 19900

    14-01-2016
    00012358

    Petroleum and natural gas industries - General requirements for offshore structures

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 19901-6 rev

    28-07-2015
    00012356

    Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 19901-7 rev

    19-12-2013
    00012338

    Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 19902 rev

    19-12-2013
    00012339

    Petroleum and natural gas industries - Fixed steel offshore structures

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 19903 rev

    26-09-2014
    00012351

    Petroleum and natural gas industries - Fixed concrete offshore structures

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 19904-1 rev

    09-10-2013
    00012336

    Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 19906 rev

    27-02-2014
    00012341

    Petroleum and natural gas industries - Arctic offshore structures

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 19918

    03-06-2015
    00162383

    Protective clothing - Protection against liquid chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through protective clothing and glove materials

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This international standard describes laboratory test methods to determine the resistance of materials and seams used in protective clothing, including gloves, to permeation by liquids with low vapour pressure (less than 1 mm Hg at 25°C) and/or insolubility in water or another liquid that does not interact with the material. These chemicals that are often part of pesticide formulations and other mixtures cannot be measured using other standards for measuring permeation. This test method is suitable for field strength and concentrated pesticide formulations as well as other mixtures in which the active ingredient is a chemical with low vapour pressure and/or insolubility in water or another liquid that does not interact with the clothing material. This method may not be suitable for testing protective clothing materials against volatile pesticide formulations. The degree of contamination depends on numerous factors such as type of exposure, application technique, and pesticide formulation. As the level of exposure can vary considerably, this method is designed to rate relative performance of PPE materials for different durations. This method is designed to measure cumulative permeation. Breakthrough time cannot be measured by this method. This test method does not measure resistance to penetration or degradation. The test method standard can be used for the evaluation of materials that are new or those that have undergone treatment, such as laundering or simulated abrasion. Details of the treatment shall be reported. This test method can also be used to determine the resistance provided by protective clothing materials against permeation of chemicals with low vapour pressure.
  • prEN ISO 19932-1 rev

    06-01-2016
    00144349

    Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 19932-2 rev

    06-01-2016
    00144350

    Equipment for crop protection - Knapsack sprayers - Part 2: Test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 19932-3

    25-11-2014
    00144333

    Equipment for crop protection - Knapsack sprayers - Part 3:Inspection of knapsack sprayers in use”

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Standard specifies the requirements and test methods for the inspection in use of Knapsack sprayers of over 3 litres nominal volume carried on the back or shoulder of the operator for applying Plant Protection Products (PPPs) in agriculture and horticulture. It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic energy to atomise the spray liquid. The requirements relate mainly to the condition of the sprayer with respect to its potential risk to the operator and the environment and its performance to achieve good application. It does not apply to other portable equipment such as knapsack combustion engine-driven air blast sprayers/mistblowers (see ISO 10988 and ISO 28139), Controlled Droplet Application equipment utilising rotary atomisers, or portable application equipment for spatial application (e.g. foggers).
  • ISO/NP TS 19995

    27-03-2015
    066834

    Sludge recovery, recycling, treatment and disposal -- Thickening and dewatering

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN ISO 20023

    15-09-2014
    00335130

    Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard provides principles and requirements for safe handling and storage of wood pellets in residential and other small-scale applications. It covers the supply chain from the final loading point of the bulk transport to the end-user storage and specific requirements for the bulk transport. It also covers the design and construction of pellet storage systems. This standard addresses risks of fires, dust explosions, off-gassing and other health risks. It is applicable to wood pellets in accordance with ISO 17225-2.
  • prEN ISO 20024-1

    15-09-2014
    00335131

    Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage in commercial and industrial applications - Part 1: General

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard provides principles and requirements for safe handling and storage of solid biofuels pellets in commercial and industrial applications. The standard covers the entire handling and storage process of pellets, (i) at a pellets production plant, from the outlet of the cooler unit until loaded for transportation and (ii) at a power plant from the receiving station until fed into a pulverizer or furnace. The process of production of pellets and safety issues related to production are not covered by this standard, nor is the pulverizing or combustion process. Although unloading and loading of e.g. vessels, trains or trucks are included, the safety issues during the transport itself are not.
  • prEN ISO 20024-2

    19-09-2014
    00335134

    Solid biofuels - Safety of solid biofuel pellets – Safe handling and storage in commercial and industrial applications - Part 2: Detection, suppression and management of fire and explosion

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard provides principles and requirements for safe handling and storage of solid biofuel pellets in commercial and industrial applications. The standard covers the entire handling and storage process of pellets, (i) at a pellets production plant, from the outlet of the cooler unit until loaded for transportation and (ii) at a power plant from the receiving station until fed into a pulverizer or furnace. The process of production of pellets and safety issues related to production are not covered by this standard, nor is the pulverizing or combustion process. Although unloading and loading of e.g. vessels, trains or trucks are included, the safety issues during the transport itself are not. This standard will give specific guidance on detection and suppression systems and preparatory measures to enable safe and efficient firefighting operations. Guidance on the management of fire and explosion incidents will also be specified.
  • prEN ISO 20048

    19-09-2014
    00335133

    Solid biofuels - Determination of off-gassing and oxygen depletion

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This international standard specifies analytical methods for the determination of off-gassing from and oxygen depletion by solid biofuel pellets. The standard specifies the applicability and use of analytical methods. It further establishes special procedures for sampling and sample handling of solid biofuels pellets prior to the analysis of off-gassing and oxygen depletion. Guidance on the applicability and use of the data on off-gassing and oxygen depletion from the analytical methods is given.
  • prEN ISO 20049

    19-09-2014
    00335132

    Solid biofuels - Determination of self-heating

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This International Standard presents analytical methods for determination of the self-heating of solid biofuel pellets. The standard specifies the applicability and use of the analytical methods. It further establishes special procedures for sampling and sample handling of biofuels pellets prior to the analysis of self-heating. Guidance on the applicability and use of the data on self-heating from the analytical methods is given.
  • ISO/NP TS 20075

    15-05-2015
    066970

    Wooden Shipping Boxes and Crates

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 20108

    09-09-2015
    CSA07005

    Simultaneous interpreting - Quality and transmission of sound and image input - Requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 20126

    29-09-2017
    00055450

    Dentistry – Manual toothbrushes – General requirements and test methods

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite