Velkommen til portalen for nye arbejdsemner

3465 Hits

CEN/TC 292

  • CLC/prTS 50398-2

    04-03-2014
    25305

    Alarm systems - Combined and integrated systems -- Part 2: Implementation guidelines for EN 50398-1

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 50407-2

    15-12-2015
    60455

    Multi-pair cables used in high bit rate digital access telecommunications networks - Part 2: Multi-pair cables with bandwidth up to 30 MHz - Indoor and Outdoor riser cables.

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This standard defines multi-pair/quad Multi Dwelling Units branching cables for use in broadband telecommunication networks, with their definitions and requirements. It covers cables, with an overall screen, with performances up to 30 MHz, used in outdoor/indoor networks intended to connect the broadband outside plant to the individual customer dwelling.
  • EN 50413:200X/prA

    01-09-2008
    21909

    Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • EN 50436-1:2014/prAC

    24-09-2015
    61392

    Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments for drink-driving-offender programs

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
  • CLC/prTS 50459-4

    03-09-2013
    24949

    Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface -- Part 4: Ergonomic arrangements of other train functions

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • EN 50491-1:2014/FprAA:2017

    12-01-2016
    61574

    General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This European Standard applies to all Home and Building Electronic Systems (HBES) and Building Automation Control Systems (BACS) and specifies the general requirements for these systems and products covering the following functionalities: - HBES class 1: simple control and command; - HBES class 2: simple voice and stable video transmission including class 1; - HBES class 3: video transfers including class 2. This standard provides an overview of this series of European Standards. To enable integration of a wide spectrum of applications, EN 50491 series covers: - electrical safety, - functional safety, - environmental conditions, - EMC requirements, - installation and cabling rules and topologies, - Smart Metering – Application specification (under development), - Smart grid – Application specification – Interface and framework (under development). EN 50491 series is a product family standard.
  • prEN 50499

    14-10-2014
    59051

    Procedure for the assessment of the exposure of workers to electromagnetic fields

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    Risk assessment of the exposure to electromagnetic fields of workers
  • prEN 50548

    14-10-2014
    59053

    Limitation of occupational exposure to electromagnetic fields from short range devices (SRDs) in electronic article surveillance, radio frequency identification and similar systems over the frequency range 0 GHz to 300 GHz

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    Risk assessment of the exposure to electromagnetic fields of workers in electronic article surveillance, radio frequency identification and similar systems
  • EN 50561-1:2013/prA1

    13-10-2015
    61268

    Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    To change references from EN 55022 to EN 55032
  • EN 50617-2:2015/prAC

    30-11-2015
    61776

    Railway Applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 2: Axle counters

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 50649

    14-10-2014
    59054

    Measurement and calculation of the EMF exposure of electrical welding workers

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    Risk assessment of the exposure to electromagnetic fields of welding workers
  • CLC/prTR 50652

    13-01-2015
    59663

    Methodology on day to day assessment of EMF exposure to the population

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    The objectives of the TR proposed by this NWI are 1) Review and analyze the method that are used today to assess the population exposure 2) Analyze the possible methods that can be used to assess the population exposure of present and future complex networks such as those of future 5G 3) Analyze the equipment specification, sensors, apps that should be required to assess the European population exposure to EMF
  • CLC/prTS 50654

    10-02-2015
    59846

    Functional Specification for HVDC Grid Systems

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This Functional Specification describes specific functional requirements for HVDC Grid Systems in Europe. The terminology "HVDC Grid Systems" is used describing HVDC systems for power transmission having more than two converter stations connected to a common DC circuit.
  • prEN 50660

    30-09-2015
    61454

    Fluids for electrotechnical applications - Recycled mineral insulating oils for transformers and switchgears

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • CLC/prTS 50662

    19-01-2016
    61766

    Requirements for power frequency measurement for distributed energy resources (DER) to be connected to electrical energy supply systems

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    The deliverable defines minimum requirements on the measurement of the power frequency for DER to be connected to in electrical energy supply networks for the self-regulating control of generating plants as well as loads in the case of power frequency deviations. Characteristics to be developed are: a) Framework conditions for measurement and analysis Recommended combinations of admissible measurement duration and required accuracy are given for different kind of use cases at least the P-by-f droop (LFSM) and control strategies using the rate of change of frequency (ROCOF), see e.g. CLC TS 50549-1 and TS 50549-2. These comprise cases with high accuracy (and certain measurement duration) as well as cases with a focus on fast reaction (and lower accuracy): - Maximum permissible duration of a measurement & analysis interval; - Minimum accuracy of the measurement & analysis; - Ranges for the response characteristic (step response) of the measuring & analysis element. The scope also comprises requirements for the derivative of the measuring element’s output. The properties of the rate of change of frequency (df/dt) determine the performance of sophisticated protection systems and the emulation of system inertia. b) Immunity requirements Requirements for the immunity of the measurement & analysis procedures have to be developed against electromagnetic disturbances which typically prevail in distribution networks more often than at transmission level, for example (sub)harmonics, vector jumps, flicker and voltage displacements after switching operations, etc. The correct functioning of measurement & analysis shall also be ensured outside operational security limits according to future Network Code Operational Security. c) Testing requirements Test procedures shall be developed to verify the correct response of measurement & analysis in a reproducible manner. The required accuracy has to be proved and an immunity assessment in an electromagnetically noisy ...
  • CLC/prTS 50675

    20-12-2016
    61868

    Power transformer energy performance

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    WG 32 will produce primarily a Technical Specification addressing Energy Performance of all power transformers in the scope of CLC/TC 14 with the goal to support the 2017 review of the Regulation also collecting the inputs coming from WG 21 and WG 29
  • CEN/CLC/ETSI/prTR 50690

    06-09-2017
    65707

    Set of Standards

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
  • CEN/CLC/ETSI/prTR 50691

    06-09-2017
    65708

    Cyber Security and Privacy

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 50710

    05-09-2018
    67769

    Guidelines and requirements for Remote Services for fire safety and security systems

    Oprindelse:
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the minimum requirements for secure remote services (e. g. via IP connections) to the following systems: a) fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems, b) security systems including, but not limited to, intruder and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems, c) social alarm systems, d) a combination of such systems The scope doesn´t cover: a) the alarm transmission infrastructure, b) the use of remote access performed by end-users
  • prCEN ISO/TR 52003-2

    19-11-2014
    00089176

    Energy performance of buildings - Technical Report accompanying ISO 52003-1, Methods for expressing the overall energy performance and for energy certification of buildings - Part 2

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prCEN/TR 52010-2

    17-02-2016
    00089183

    Energy performance of buildings - External climatic conditions - Part 2: Explanation and justification of ISO 52010-1

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This new technical report refers to standard EN 52010-1 on calculation of solar irradiance on an arbitrary plane based on measured hourly weather data. It contains information to support the correct understanding, use and national adaptation of that standard. This technical report does not contain any normative provision.
  • prEN ISO 52017-3

    17-04-2014
    00089162

    NP EN ISO 52017-3, Energy performance of buildings - Building and Building Elements - Calculation of the Dynamic Thermal Balance in a Building or Building Zone – Part 3: Simplified procedures

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This new international standard will, in two parts, integrate EN 15265, EN 15255, EN-ISO 13791 and EN-ISO 13792. Depending on the development, the split between part 1 and part 3 will be between a detailed method(s) (part 1) and simple method(s) (part 3). This standard will contain a consistent and integrated set of requirements and additional descriptions of the thermal balance model for the hourly calculation of the energy needs for heating and cooling, the heating and cooling loads and indoor temperature in a thermal zone of a building. It will be directly usable by ISO 52016-1 for the calculation of the energy needs and by other EPB standards (e.g. from CEN/TC 156) dealing with needs, loads or indoor (e.g. summer) temperature calculations.
  • prCEN ISO/TR 52018-2

    19-11-2014
    00089179

    Energy performance of buildings - Building and building elements. Ways to Express Energy Performance and Energy Performance Requirements - Part 2: Explanation and justification of ISO 52018-1

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prCEN ISO/TR 52019-2

    19-11-2014
    00089180

    Energy performance of buildings (EPB) - Building and Building Elements - Hygrothermal performance of building components and building elements - Part 2: Explanation and justification

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prCEN ISO/TR 52022-2

    26-05-2014
    00089171

    Energy performance of buildings - Building and Building Elements – Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (CEN ISO/TR 52022-2)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This new technical report refers to the cluster of standards EN ISO 10077-1, EN ISO 10077-2, EN ISO 12631, EN ISO 52022-X (based on the revision of EN 13363-1 and EN ISO 52022-X (based on the revision of EN 13363-2) on the Thermal performance of windows, doors and shutters – Thermal, solar and daylight properties of windows, frames and facades – Calculation methods. It contains information to support the correct understanding, use and national adaptation of these standards. This technical report does not contain any normative provision.