Velkommen til portalen for nye arbejdsemner

3479 Hits

ISO/TC 69/SC 4/WG 11

  • No reference

    14-03-2008
    00295019

    Residential solid fuel burning appliances - Determination of particulate emission - Test method

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    This European Technical Specification (TS) describes a method to determine particulate emissions in the flue gas of residential solid fuel burning appliances (fed manually or by automatic feeding devices). The test method is based on gravimetric particulate emission measurement collecting the entire flue gas flow under constant volume sampling (CVS) conditions by means of a dilution tunnel. The dilution tunnel parameters are kept in similar ranges for temperature levels and dilution ratios in the test runs for the different appliance burn rates and fuel loads as specified in the hENs. The particulate emission comprises the total mass of solid and condensed matter of various shape, structure and density emitted in a test cycle of a solid fuel burning appliance.
  • No reference

    25-04-2008
    00331076

    Postal services - Hybrid mail - Reverse hybrid mail standardisation

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The actual business needs of postal service providers and service providers alike, mainly the interface that any Reverse Hybrid Mail System software must offer towards the customers and between service providers. The following items could be defined: - Interface to postal service providers (offices of exchange between the different service providers) - Use of tracking and/or intelligent mail specifics to add value and quality of service - Data coming out of the service and between similar services - Data specification of how data are to be delivered - Interface description and message flow - Quality of service and its measurement In order to identify the need and feasibility of a standard the following activities are foreseen: - Desktop research on existing similar applications - Mapping of existing requirements - Survey to establish future needs
  • No reference

    27-06-2008
    00203036

    Durability of buried ductile iron pipes and fittings - General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Requirements and associated test methods on the durability of buried DI pipe systems, expressed in functional terms (related to the performance in use) instead of descriptive terms as presently given in EN 545, EN 598 and other product standards.
  • No reference

    22-08-2008
    00336127

    Bitumen and bituminous binders - Recommendations for updating the precision of test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Bituminous binders for paving application – Test methods precision: recommendations.
  • No reference

    12-09-2008
    00292074

    Characterization of waste - Amendment to the CEN/TR 15310 package to add relevant examples form the extractive industries

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    Sampling from extractive operations (e.g., during exploration, operation and closure planning). Work includes for selected sampling scenarios: - key elements to be considered in sampling plan, presentation of sampling plan for typical sampling situations, e.g. different stages of operation - sampling approach (examples) - overview of sampling appropriate sampling techniques for typical sampling situations - specific need in sample pre-treatment of mining waste (modifications to prCEN/TR-3) - specific need for preservation of mining waste etc (modifications to prCEN/TR-4) - quality aspects
  • No reference

    12-09-2008
    00331080

    Postal services - EMAI Universal Identifier for postal items

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Development of a specification for a universal mail item identifier that can be pre-printed by manufacturers of envelopes, addressing labels, postcards and similar products. The standard will provide a technical foundation for a variety of customer and postal applications where knowledge of mail item identifiers could be used for tracking purposes as well as for monitoring quality of service and similar applications.
  • No reference

    21-11-2008
    00151311

    Requirements for equipment for supply of breath to the operator"s cabs used on Earth-Moving Machinery

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Earth-moving machinery
  • No reference

    21-11-2008
    WSPCE002

    Criteria, methodology and procedures for creating an E-codification concerning substances used in Pharmaceutical compounding

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    The domain addressed by this CWA is the E-codification of substances used by compounding pharmacists in pharmaceutical compounding. The present document specifies the technical requirements for creating the record structure and E-codification of the various substances supplied by commercial suppliers and used by the pharmacist in the pharmacy for preparing -Magistral Formula- and -Formula Officinalis- as defined by the European Directive 2001/83, Article 3, Paragraph 1) and 2). The CWA includes a record of the supplier of substances. -Magistral Formula – and -Formula Officinalis are not themselves part of the present CWA The users of the CWA are the editors of a databank. In this sense the CWA is not addressed to the final users of the databank but to the subjects which realize and implement the databank (the editors) The purpose of the CWA is to define certain criteria the editors have to comply with, in realizing a databank in order to: (i) allow an unique identification of the single substance in order to avoid any possible misunderstanding; (ii) provides pharmacists and physicians with the basic information on each single substance and its administration (see paragraph 6.2, 6.4, 6.6, 6.8); (iii) provides pharmacists and physicians with indication on the availability of the substance on the European and international market; The CWA aims at setting forth the basis for establishing a unique language for compounding pharmacists, physicians and providers to the pharmacy of substances. The CWA proposes to fill a gap, in terms of harmonization, that characterizes the pharmaceutical compounding. This shall allow: (i) an increase in the sharing of scientific information concerning substances used in pharmaceutical compounding and basic pharmacological and administration information among physicians and pharmacists; (ii) a development of the pharmacy compounding; (iii) An increased in ADR reporting concerning substances used in pharma
  • No reference

    28-11-2008
    00121547

    Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of welding fume extraction devices

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard describes a test method for measuring capture efficiency of a welding fume extraction device using a tracer gas technique. The method is applicable to captor hoods, such as nozzles and slots of all designs used with high volume/low velocity extraction systems. It can also be used to evaluate low volume/high velocity extraction systems such as on-gun systems used for gas shielded arc welding. It cannot be used with down-draught tables or for allied processes and welding-related operations, e.g. thermal cutting, thermal spraying and grinding. It is based on EN 1093-4.
  • No reference

    28-11-2008
    00264124

    Programme of standards for greenhouse gas (GHG) emissions in energy-intensive industries

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Development of a programme of GHG standards for energy-intensive industrial sectors which can be used for planning and managing emissions reduction, developing key performance indicators and sector baselines
  • No reference

    12-12-2008
    00164431

    Sanitary tapware - General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the general requirements for Sanitary taps and terminal fittings used in bathroom, kitchens and toilets and accessories for sanitary taps and describes the test methods related to these requirements.
  • No reference

    12-12-2008
    00164437

    Water supply - Specification for indirectly heated unvented (closed) storage water heaters

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the performance requirements and methods of test for indirectly heated, unvented (closed) storage water heaters of up to 1000 l capacity suitable for connection to a water supply at a pressure between 0,05 Mpa and 1,0 Mpa (0,5 and 10 bar), and fitted with control and safety devices designed to prevent the operating temperature of the stored drinking water from exceeding 100 °C. Whilst storage water heaters intended primarily for direct heating are not covered by this standard, it does allow the provision of electric heating elements for auxiliary use.
  • No reference

    20-02-2009
    00350014

    Sustainability of construction works - Environmental product declarations communication format - Business to Consumer

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • No reference

    17-07-2009
    00383002

    Sustainably produced biomass for energy applications - Part 2 Calculation of the GHG emission balance

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The standard provides guidance for the calculation of GHG emissions related to the production, processing and transport of biomass for energy applications. It presents detailed calculation methods for each step of the chain and define appropriate fossil fuel references for each type of biofuels (liquid, gaseous or solid). The standard does not provide for the evaluation of the GHG savings achievable through a use of particular biomass for energy. Criteria for cost-effectiveness are not included
  • No reference

    17-07-2009
    00383003

    Sustainably produced biomass for energy applications - Part 3 Biodiversity

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies requirements relevant to biodiversity and related aspects (for example landscape and ecosystem services) for sustainably produced biomass for energy applications. This standard is applicable to direct conformity assessment and conformity assessment of other certification systems. To that end this standard: (i) establishes ""principles, criteria, indicators, verifiers and associated guidance to assess the compliance of sustainable biomass production and processing; (ii) establishes guidelines for assessing the equivalence of the requirements of certification systems with regard to biodiversity and related issues. This standard is applicable to, at least but not limited to, biomass from forestry and agriculture.
  • No reference

    17-07-2009
    00383004

    Sustainably produced biomass for energy applications - Part 4 Environmental issues

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies requirements relevant to environment (for example air, soil and water) and related issues for sustainably produced biomass for energy applications. This standard is applicable to direct conformity assessment and conformity assessment of other certification systems. To that end this standard: (i) establishes ""principles, criteria, indicators, verifiers and associated guidance to assess the compliance of sustainable biomass production and processing; (ii) establishes guidelines for assessing the equivalence of the requirements of certification systems with regard to environment and related aspects. This standard is applicable to, at least but not limited to, biomass from forestry and agriculture.
  • No reference

    26-06-2009
    00383005

    Sustainably produced biomass for energy applications - Part 5 Economic and social aspects

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The standard provides principles, criteria, indicators and verifiers for economic and social aspects related to the production and where relevant processing and transport of biomass for energy applications, up to, but not including the final energy use (e.g. from well to tank or the-like). It includes direct impacts and address issues like, but not limited to, human capability, economic requirements, employment, labour conditions, health and safety, land use rights and effects of scale.
  • No reference

    17-07-2009
    00383006

    Sustainably produced biomass for energy applications - Part 6 Conformity assessment

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The standard specifies system requirements for: (i) Assessment of conformity with the sustainability criteria for biomass for energy applications; (ii) Evaluation of the conformity of other standards with the arrangements defined in (i). The standard relates to the systems for assessment of conformity with sustainability criteria, indicators and/or verifiers as defined by other CEN standards, together with assessment of conformity with chain of custody controls. The standard includes systems for the evaluation of other schemes and/or standards.
  • No reference

    26-06-2009
    00383007

    Sustainably produced biomass for energy applications - Part 7 Indirect effects

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies a framework for the analysis of indirect effects and minimisation of negative (or maximisation of positive indirect, whatever more relevant) indirect effects related to the production of biomass for energy applications. The framework consists of 1) problem definition, 2) assessment and monitoring methodology, 3) risk mitigation options, and 4) roles for bio-energy producers and regulators. Potential drivers of indirect effects to be incorporated in this standard include competition with food, feed and industrial uses, competition with natural resources to produce biomass, taking into account the use of co-products as well. Potential consequences of indirect effects to be analysed and reported, include the impacts on GHG emissions, biodiversity, environmental aspects, and economic and social issues.
  • No reference

    24-04-2009
    00187127

    Determination of shot content of High Temperature Insulation Wool (HTIW) products

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    2 different test methods will be developed based upon existing tests used by Industry. These consist of a dry method that is rapid & simple to do & a wet method that is much slower. The intention is to make sure both tests give similar results. The dry method requires expensive equipment whilst the wet method is inexpensive to set up. The sampling methodology is considered to be the area requiring most development. The form can be bulk, paper, shapes, boards, felt or blanket.
  • No reference

    24-04-2009
    00187128

    Three point bend test for High Temperature Insulation Wool (HTIW) Boards

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    3 test methods already exist within the Industry. The intention is to carry out tests using all 3 methods in a round robin type activity to see if these methods give the same results. A unified method can be rapidly agreed if these methods are similar. If different results are produced some investigation will be required in deciding the best method to adopt.
  • No reference

    24-04-2009
    00187129

    Determination of thermal conductivity of High Temperature Insulation Wool (HTIW) products

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    There are a number of different calorimeter type tests in existence, but many use old methods & old equipment. The intention is to create a method that is up to date which can use most calorimeter type equipments & instead focuses upon the method of sample preparation in the equipment & uses more sophisticated & accurate methods of measuring & calculating the data to give excellent thermal conductivity data. The form can be blanket, board, paper & felts.
  • No reference

    24-04-2009
    00187130

    Determination of mean fibre diameter & fibre distribution of High Temperature Insulation Wools (HTIWs) by Scanning Electron Microscopy (SEM)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    A method already exists to measure the fibre diameter distribution of HTIWs. This was developed between ECFIA & HSE in the 1990"s but was never officially published. Round robins were carried out between 5 labs to show that the method worked. The intention is to make this method into a standard & check that the method is robust & useable. The method should be applicable for blanket, paper, felt & bulk only.
  • No reference

    24-04-2009
    00187132

    Determination of reduced species in carbon containing refractories by XRD

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The use of XRD to determine the reduced species – alpha silicon nitride, beta silicon nitride, free silicon, free iron, free aluminium, born carbide and aluminum carbide in any refractory product or raw material that contains deliberately added carbon.
  • No reference

    24-04-2009
    00187133

    Preparation of silicon carbide materials for subsequent analysis by EN ISO 12677

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Reduced materials such as silicon carbides cannot be prepared into XRF beads by the methods described in ENISO12677. The Standard will describe how ground samples of silicon carbide bearing materials can be converted into glass beads for subsequent analysis by the instrumental part of ENISO12677. It will include any special blank corrections and calibration requirements related to these materials.