Velkommen til portalen for nye arbejdsemner

3479 Hits

ISO/TC 69/SC 4/WG 11

  • No reference

    24-04-2009
    00224204

    Identification card systems - Interoperable Citizen Services - User related information

    Oprindelse:
    CEN
    Emner

    IT

    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Supports open multi-application access to Government and Citizen services through the use of smartcards as access tokens. Card-held data is enable terminals and services to adapt to the user"s requirements described as: - A profile of needs/user requirements - User specific preferences - Linkages to association, groups, memberships
  • No reference

    12-06-2009
    00226131

    Test methods for measuring road marking performance with vehicle mounted equipment

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Test methods for measuring road marking performance with mobile equipment by the collection of information on the accuracy and applicability of existing mobile equipments and of developments in progress. It is expected that such a new standard will facilitate the use of mobile methods in connection with contracts and with Road Marking Management Systems, and lead to better use of economic resources for road marking and to improvement of road marking performance
  • No reference

    12-06-2009
    00264129

    Ambient air quality - Standard method for the determination of the concentration of ammonia by diffusive sampling

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This CEN Standard describes a measurement method for the determination of time-weighted average concentrations of ammonia in ambient air, which can be used in support e.g. of the National Emissions Ceiling Directive (2001/81/EC, currently under revision). The measurement method is based on diffusive sampling of ammonia and subsequent analysis of the diffusive samplers.
  • No reference

    12-06-2009
    00264130

    Air quality - Determination of the particle size distribution of atmospheric aerosol

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This Technical Specification specifies measurement methods for the determination of the particle number concentration of atmospheric aerosol within a limited number of size ranges, providing a size distribution in ambient air. The lower and upper sizes to be considered are approx. 10 nm and 10 µm, respectively. This Technical Specifications describes calibration, sampling, operating and QA/QC procedures and data processing.
  • No reference

    19-06-2009
    00019387

    Liquid petroleum products - Determination of filterability of middle distillates

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies a method for determining filterability of middle distillates, especially automotive diesel fuel. It describes techniques to estimate the possible occurrence of filter blocking problems due to undissolved substances in the fuel. It incorporates both simulations for ageing and cold climate storage. Work shall be done in cooperation with the JWG on FAME that should be responsible for assessing the applicability of the evaluation method for 100% FAME. Inclusion of a cold soak period to precondition the FAME prior to ambient temperature filter blocking testing should be considered. Reporting of the working group"s progress shall be done on a regular basis to WG 24.
  • No reference

    19-06-2009
    00019389

    Fatty acid methyl ester (FAME) fuel and blending component for diesel fuel - Determination of saturated monoglycerides

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies a method for determining to allow determination of saturated monoglycerides at 0,3 % (m/m) level. Work shall be done in cooperation with WG 24.
  • No reference

    03-07-2009
    00305115

    Combustion propagation behaviour of dust layers by classification into burning classes

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Safety assessments need to look at the possibility of a fire in dust layers which could then propagate or initiate an explosion. The so-called burning class of a dust gives an indication of dust layer combustion behaviour. The burning class can be determined by a simple screening test. It is aimed to develop a European standard describing the methodology for the determination and classification of dust layer combustion behaviour. The standard should describe whether a fire started in a dust layer using an external ignition source can propagate, and if so to what extent . Based on the test result the combustion behaviour is classified according to the following: Type of Reaction Class No ignition 1 Brief ignition, rapid extinction 2 Localised combustion, negligible spreading 3 Smouldering or slow combustion without flame 4 Slow, quiet burning with flames 5 Very rapid combustion with flame propagation or rapid decomposition without flame 6 The standard will cover: - Details of the test set-up; - Description of test performance; - Classification procedure; - Effect of process conditions (e.g. process temperature).
  • No reference

    14-08-2009
    00266018

    Thermoplastics static tanks with secondary containment for above ground storage of domestic heating oils, kerosene and diesel fuels - Requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The standard will specify the requirements for static thermoplastic tanks combined with secondary containments. It will be applicable to the combination of a primary tank, fulfilling the requirements of EN 13341, and its corresponding secondary containment made of steel or blow moulded polyethylene or rotationally moulded polyethylene or anionically polymerized polyamide 6.
  • No reference

    18-09-2009
    00278261

    Public transport - European ticketless and ticket on departure for rail distribution

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The Technical Specification will define the architecture and messaging enabling through linking between issuers, attributors and service providers for European public transport ticketless and ticket on departure for rail distribution.
  • No reference

    02-10-2009
    00074062

    Sample calculations and guidance on interpretation of calculations presented in EN 1591-1

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This Technical Report is a guideline for the use of the calculation code EN 1591-1:2001+A1:2009. It shall give full particulars in the interpretation of the calculation method. Especially the usage of the gasket characteristics determined in accordance to EN 13555 shall be illustrated.
  • No reference

    02-10-2009
    00074063

    Guidance on the design of finite element analysis (FEA) of bolted flange connections

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This is a guidance document on the techniques and considerations when carrying out finite element analysis (FEA) of bolted flange connections. This document has become necessary because the existing calculation method for bolted flange connections, although comprehensive, is too long and complex. This document is considering recent developments in desk top computer power and finite element analysis (FEA) software products.
  • No reference

    30-10-2009
    00162313

    Performance requirements for ventilated and non-ventilated "non-gas-tight" (Type 2) chemical protective suits

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the minimum requirements, test methods, marking and information supplied by the manufacturer for the following ventilated and non-ventilated limited use and re-usable chemical protective suits: Type 2 -""non-gas tight"" chemical protective suit ""Non-gas-tight"" chemical protective suit with breathable air providing positive pressure.
  • No reference

    20-11-2009
    00315014

    Safe calculation in spectator facilities

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This Technical Report gives information on how a safe evacuation fro spectator facilities could be established by means of the safe calculation
  • No reference

    27-11-2009
    00156151

    Ventilation for buildings - Calculation of Delivered energy for ventilation systems and air heating systems for residential buildings

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard describes a method to calculate the energy impact of ventilation systems (including airing) to be used for applications such as energy calculations for heating and cooling in residential buildings including corresponding energies required for its treatment and the auxiliary energy required.
  • No reference

    27-11-2009
    00156155

    Ventilation for hospitals

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This document applies to health service buildings and rooms used for medical examinations, treatments and interventions to be carried out on people as well as to rooms directly connected to those rooms by doors, corridors/hallways, etc.
  • No reference

    27-11-2009
    00339005

    Slip resistance of pedestrian surfaces - Methods of evaluation - Ramp test using water as contaminant

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This document is intended to specify a test method for the determination of the slip resistance of floorings in the most commonly encountered situations in which pedestrians walk using the ramp test using slider 96, footwear and water as contaminant. It is intended to substitute one or more methods given in the CEN/TS which is currently prepared as WI 00339004. The ramp test given in WI 00339004 is using a lubricant as contaminant. To replace the lubricant by water would be reasonable. This Technical Specification will not cover sports surfaces and road surfaces for vehicles (skid resistance).
  • No reference

    04-12-2009
    00166079

    Chimneys - Accessories - Part 4: Flue dampers - Requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European standard specifies the requirements and test methods for flue dampers that are used as components, carrying flue gases, in order to limit the flow in a chimney. Flue dampers may be manually adjusted, sited in connecting flue pipes or chimneys, in order to reduce the burning rate (stoves/fireplaces), or mechanically or thermally driven for reducing/closing the flue, in order to reduce the stand-by losses (gas appliances type B). Components tested together with the liner or system chimney are not covered by this standard.
  • No reference

    04-12-2009
    00166080

    Chimneys - Accessories - Part 5: Explosion/implosion relief devices - Requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European standard specifies the requirements and test methods for explosion/ implosion relief devices that are used as components, carrying flue gases, in order to prevent damage in the heating appliance and chimney. Components tested together with the liner or system chimney are not covered by this standard.
  • No reference

    04-12-2009
    00308101

    Characterization of sludges - Determination of sludge Particle and Floc size

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The main problem of parameters and tests adopted for sludge characterisation is that they are generally specific to the method of treatment, but not able to give fundamental information on the sludge in question. One of the most important parameters yielding basic information is the Particle and Floc size (this determination was also dealt with in the framework of European COST68 and 681). This parameter also strongly affects the performance of several sludge management operations. Several procedures are available for evaluation of above parameter (e.g. direct examination, fractioning and counting), each showing some pros and cons. This Technical Report will discuss applicability of all adopted measuring methods in order to propose a procedure to be possibly finalised in a standardised one.
  • No reference

    04-12-2009
    00308104

    Characterization of Sludges - Evaluation of biological stability of sludge

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The evaluation of biological stability of sludge is of great importance considered that the level of biological stability strongly influences handling of such materials, as it gives indications on effectiveness of subsequent treatments, including risks of developments of bad odours, effective acceptability in a landfill, possible reuse for environmental purposes, etc. This standard is aimed to develop a standardised procedure able to compare results obtained at different places and on different times, and to set appropriate numerical limits in European legislation.
  • No reference

    18-12-2009
    00216068

    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of sporicidal activity of medical and instrument disinfectants - Test method and requirements (phase 2/step 1)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • No reference

    18-12-2009
    00216069

    Chemical disinfectants and antiseptics - Medical instrument disinfectants - Sporicidal activity - Test method and requirements (phase 2/step 2)

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • No reference

    18-12-2009
    00216071

    Chemical disinfectants and antiseptics - Quantitative suspension test for the valuation of sporicidal activity of chemical disinfectants and antiseptics used in the veterinary field - Test method and requirements (phase 2/step 1)

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • No reference

    22-01-2010
    00169053

    The photometry of LED Modules and luminaires equipped with LED modules

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This document specifies requirements on photometric measurements of LED modules and LED luminaires. Justification and Purpose: LED lighting is a new technology which is increasingly used as it offers high energy saving potentials and long life expectations. However the classical methods used for the photometry of luminaires equipped with classical electrical light sources do not apply and specific methods have to be applied. The proper quality evaluation of these products become urgent as more and more LEDs luminaires are coming on the market while complaints are increasing that a number of installations does not fullfill expectations.
  • No reference

    26-02-2010
    00162322

    Protective clothing against contamination by nanometric size particles

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The purpose of this new work project is to specify requirement and test methods for protecting workers against particulate nano contamination. By extension of the standard related to the Chemical protective Equipements TC 162/WG 3 and EN 1073 where the size of the particle will be extended to the nanometric particules.