Velkommen til portalen for nye arbejdsemner

3479 Hits

ISO/TC 69/SC 4/WG 11

  • No reference

    06-05-2011
    00089138

    Thermal insulation - Construction products, building elements and structures - In-situ measurement of thermal performance - Part 4. Testing of structures

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies principles and testing procedures for the in-situ measurement of the thermal performance of construction products, opaque building elements and the heat transfer rate through building elements and structures. This standard covers internal environmental conditions and all effects of the natural external environment, for example wind, air infiltration and solar radiation. The results of measurements carried out to this standard are intended to be used to complement thermal performances established under steady state conditions. This first part of the standard covers the Testing of structures
  • No reference

    06-05-2011
    00089139

    Thermal insulation - Construction products, building elements and structures - In-situ measurement of thermal performance - Part 1. General principles

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies principles and testing procedures for the in-situ measurement of the thermal performance of construction products, opaque building elements and the heat transfer rate through building elements and structures. This standard covers internal environmental conditions and all effects of the natural external environment, for example wind, air infiltration and solar radiation. The results of measurements carried out to this standard are intended to be used to complement thermal performances established under steady state conditions. This first part of the standard covers the General principles
  • No reference

    06-05-2011
    00089140

    Thermal insulation - Construction products, building elements and structures - In-situ measurement of thermal performance - Part 5. Testing of completed buildings

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies principles and testing procedures for the in-situ measurement of the thermal performance of construction products, opaque building elements and the heat transfer rate through building elements and structures. This standard covers internal environmental conditions and all effects of the natural external environment, for example wind, air infiltration and solar radiation. The results of measurements carried out to this standard are intended to be used to complement thermal performances established under steady state conditions. This first part of the standard covers the Testing of completed buildings
  • No reference

    20-05-2011
    00159038

    Hearing protectors for children - Safety requirements and testing

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard sets requirements for personal hearing protection devices in relation to Directive 89/686/EEC – Personal Protective Equipment. The particular requirement in relation to the ability of hearing protectors to reduce noise below daily limit levels is addressed in the standard by requiring the sound attenuation of the hearing protectors, measured in accordance with EN 24869-1, to be not less than a specified minimum. Further, by requiring that the measured sound attenuation would be declared, the selection of suitable hearing protectors for individual circumstances may be undertaken according to established practice. This standard would cover hearing protectors for children aged 5 -16.
  • No reference

    27-05-2011
    00126113

    Test code for suspended ceilings - Part 2: Flanking transmission

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • No reference

    10-06-2011
    00192102

    - Inductor proportioner PN 16 for foam compound

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard applies to inductor proportioners for foam compound (shortly proportioner) which serve to mix foam compound or other (fluid) extinguishing media with water and which operate according to the Venturi effect, and specifies their requirements and tests. The standard does not apply to proportioners which are fitted in inductor foam branch pipes in accordance with DIN 14366-1 (handheld foam branch pipes).
  • No reference

    01-07-2011
    00093188

    Combination ladders with separate platform (prEN 131-8)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    The standard specifies requirements and testing for a single product consisting of a combination ladder and separate platform where the platform height in the position of use is no higher than 1 m.
  • No reference

    29-07-2011
    00158089

    Helmets for hurling and camogie players.

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Specify performance requirements for helmets for hurling and camogie players.
  • No reference

    26-08-2011
    00047036

    Parts for supply systems for consuming units with liquid fuels - Safety requirements and tests - Part 1: Terminology, general requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard applies to all parts of supply systems for the automatic supply of liquid fuel to one or more consuming units from one or more tanks. It applies to pressurised, unpressurised, underground, above ground, inside and/or outside systems to supply of liquid fuels. This European Standard specifies the terminology, general and safety requirements and tests methods for the parts of such supply systems. The parts of supply systems includecovered by this standard are: a) feed pumps; b) control and safety devices; c) service tanks; d) service vessels; e) isolating valve; f) quick-acting valve; g) switch-over valve; h) forced switch-over valve; i) check valve; j) pressure compensating device; k) discharge valve; l) pressure reducer; m) filter; n) meter; o) de-aerator; p) anti-siphon safety device; q) pressure retaining device; r) insulating device; s) pressure gauge; t) vapour/air separator; u) pressure control path; v) remote acting fire safety valve; w) combined part; x) other part; y) pipes; z) fasteners; aa) pipeline connections; bb) parts within pipes
  • No reference

    26-08-2011
    00047037

    Parts for supply systems for consuming units with liquid fuels - Safety requirements and tests - Part 2: Feed pumps and their control and safety devices and their service vessels

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard applies to parts of supply systems for the automatic supply of liquid fuel to one or more consuming units from one or more tanks. It applies to pressurised, unpressurised, above ground, inside and/or outside systems to supply of liquid fuels. This European Standard specifies the safety requirements and tests methods for the parts of such supply systems. The parts of supply systems covered by this standard are: a) feed pumps; b) control and safety devices; c) service tanks; d) service vessels.
  • No reference

    26-08-2011
    00047038

    Parts for supply systems for consuming units with liquid fuels - Safety requirements and tests - Part 3: Valves and meters

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard applies to parts of supply systems for the automatic liquid fuel supply of consuming units from one or more tanks: It applies to pressurised, unpressurised, underground, above ground, inside and/or outside systems to supply of liquid fuels. This European Standard specifies the safety requirements and tests methods for the parts of such supply systems. The parts of supply systems covered by this standard are: a) isolating valve; b) quick-acting valve; c) switch-over valve; d) forced switch-over valve; e) check valve; f) pressure compensating device; g) discharge valve; h) pressure reducer; i) filter; j) meter; k) de-aerator; l) anti-siphon safety device; m) pressure retaining device; n) insulating device; o) pressure gauge; p) vapour/air separator; q) pressure control path; r) remote acting fire safety valve
  • No reference

    26-08-2011
    00047039

    Parts for supply systems for consuming units with liquid fuels - Safety requirements and tests - Part 4: Pipings and parts within pipelines

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard applies to parts of supply systems for the automatic liquid fuel supply of consuming units from one or more tanks. It applies to pressurised, unpressurised, underground, above ground, inside and/or outside systems to supply of liquid fuels. This European Standard specifies the safety requirements and test methods for the parts of such supply systems. The parts of supply systems covered by this standard are: a) pipes; b) fasteners; c) pipeline connections; d) parts within pipes;
  • No reference

    21-10-2011
    00346037

    Conservation of cultural property - Waterlogged archaeological wood - Guidelines for characterization

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard provide a guideline for characterization of waterlogged archaeological wood in relation to excavation and conservation
  • No reference

    21-10-2011
    00318064

    Measurement of liquid flow in open channels - Determination of the stage-duscharge relationship

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies methods of determining the stage-discharge relation for a gauging station.
  • No reference

    21-10-2011
    EC110208

    Stainless steel tubes for structural and decorative applications - Technical delivery conditions and tolerances

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The standard defines the materials, the dimensions, the tolerances, the tests, the surface characteristics and the data traceability (marking on the tubes) of welded stainless steel tubes for structural and/or decorative applications. It is applicable both to tubes with round section (round tubes) and to square and rectangular tubes. The tubes described in the present norm can be manufactured with all the present modern continuous process welding technologies like TIG, Laser, HFIW (High Frequency Induction Welding) unless the tubes requirements are according to the EN 10296-2 and the present norm. The tubes produced according to this norm do not need any heat treatment
  • No reference

    21-10-2011
    00137053

    Workplace exposure - Guidance on measurement techniques for nanoparticles relevant to exposure via inhalation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    For occupational exposure to ultrafine aerosols and nanoaerosols, exposure metrics like the number and surface area concentration are important. This CEN Technical Specification provides guidelines for available measurement techniques, measurement strategy (based on a tiered approach) and background elimination, in order to determine the occupational exposure to airborne nanoparticles. Potential problems and limitations are described and need to be addressed.
  • No reference

    28-10-2011
    00352012

    Guidance on detection and identification of nanoparticles and other nanoscale entities (in all media types, including waste streams from manufacturing and manufacturing discharges)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This project will provide guidelines for detection and identification of manufactured nano-objects in plants producing and using them, to prevent worker exposure and environment dissemination in the atmosphere, water and soil through waste streams
  • No reference

    28-10-2011
    00352013

    Protocols for determining the explosivity and flammability of nano-powders (for transport, handling and storage)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This project will provide guidelines for determining explosivity and flammability properties of manufactured nano-objects in powder. The explosivity and flammability properties have to be given in the safety data sheet for a safe storage, handling and transport of any powder.
  • No reference

    28-10-2011
    00352014

    Guide to the management of waste and the disposal of nanomaterials

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This project will provide guidelines for the management of waste and disposal of nanomaterials in general, nano-objects and materials containing nano-objects in particular
  • No reference

    28-10-2011
    00352011

    Protocols for whole life cycle assessment of nanoscale materials, devices and products

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This project will provide guidelines for the assessment and management of the whole life cycle of products and devices containing nanomaterials and in particular containing nano-objects
  • No reference

    04-11-2011
    00309157

    Footwear - XRF screening of metals in footwear

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard describes a test method intended to determine the metals present in the footwear, or footwear components, based on the XRF screening technique.
  • No reference

    11-11-2011
    00046005

    Fireplaces for liquid fuels - Decorative appliances producing a flame using ethanol based or gelatinous fuel - Use in public buildings

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This document applies for decorative fireplaces/appliances producing a flame using ethanol based or gelatinous fuel for decoration. These appliances are used in closed rooms in public/commercial buildings. This document applies to free-standing appliances and built-in appliances. This document applies for appliances ready for use, whose burner is of one unit or are an integral component of the appliances but not for appliances with a separate fuel tank. This document does not apply for appliances for heating or keeping food warm (Rechauds), as well as for appliances for use in boats, caravans and other vehicles. This document does not apply for appliances which have a defined heat power. Such appliances are to be regarded as heaters or fireplaces that require a separate Building Inspection Qualification Certificate.
  • No reference

    11-11-2011
    00046006

    Fireplaces for liquid fuels - Domestic appliances fired by ethanol for heating

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This document applies for domestic fireplaces/appliances producing a flame using ethanol based or gelatinous fuel for heating. This document applies to free-standing appliances and built-in appliances. This document applies for appliances ready for use, whose burner is of one unit or are an integral component of the appliances but not for appliances with a separate fuel tank. This document does not apply for appliances for keeping food warm (Rechauds), as well as for appliances for use in boats, caravans and other vehicles.
  • No reference

    11-11-2011
    00166095

    Chimneys - Fire resistance tests for service installations

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies a procedure to determine the resistance time for chimneys under standardized fire conditions. The test examines the behaviour of chimneys products exposed to fire from the outside (chimney A) and fire inside (chimney B) the chimney product (both considered as external to external, according to EN 1443). This European Standard is not applicable to: – sootfire resistance condition – doors of inspection openings unless to included in the chimney to be tested; – two or three sided shafts; The standard also applies to the testing of combined natural draught shafts used for ventilation and to supply combustion air to the appliance.
  • No reference

    02-12-2011
    00151405

    Machinery and plants for the preparation of concrete and mortar - Safety requirements - Specific requirements for small mobile tipping drum mixers

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    1.1 This document applies for small mobile tipping drum mixers as defined in 3.1. This document specifies the requirements for the design of mixers with tilting drum and with manual feeding.It does not include requirements relevant to mixing plants for batching (EN 12151-1) or continuous production, truck mixers (prEN 12609), self-propelled machines, conveying, spraying and placing machines for concrete and mortar (EN 12001 and e.g. B.17). The machinery may be stationary or it may be capable of being transported to an alternative position. 1.2 This document deals with all significant hazards, hazardous situations and events relevant to mixers with tilting drum and with manual feeding, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The exceptions are explosion hazards when using flammable or explosive materials that are significant but not dealt with. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.Maintenance is dealt with but not noise during maintenance. 1.3 This document is not applicable to mixers with tilting drum and with manual feeding which are manufactured before the date of publication of this document by CEN.