Velkommen til portalen for nye arbejdsemner

3479 Hits

ISO/TC 69/SC 4/WG 11

  • No reference

    27-07-2012
    00203047

    Ductile iron pipes, fittings, accessories and their joints for water distribution pipelines - Requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints used for the construction of external secondary water pipelines for local mains and service pipes as detailed in EN 805: - to convey water intended for human consumption ; - with or without pressure ; - to be installed below or above ground.
  • No reference

    03-08-2012
    00256628

    Railway applications - NDT on rails in track - Part 2: Requirements for describing and identifying internal and surface rail defects

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This document lays down the requirements for describing and idenifying internal and surface rail defects. This document describes the NDT procedures which can detect the rail defects. This document does not concern the assessment of rail defects and the derived maintenance measures.
  • No reference

    24-08-2012
    00278344

    Intelligent transport systems - Public transport - Implementation specifcations for IFM Systems

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Background: Most IFM systems are relying on ISO/IEC 14 443 standard series for ensuring contactless communication between smart ticketing media (PICC) and contactless readers (PCD). The ISO/IEC 14 443 is a cross industry standard and hence offers a large set of possible options and configurations (more than 12 documents for tests & specifications). To ensure contactless interoperability between readers and objects, different industry segments have published ISO/IEC 14 443 implementation specifications and have set up associated certifications process. For transit industry no global implementation specification and certification process exist: - Test are done at local scale depending on each PT network interoperability area (city, county, region, country, ...) This is a limitation to transit interoperability and this situation is not future proofed - Contactless testing of banking cards and NFC phones with transit systems cannot remain local and must be centralized. Work Item Proposal: This Work Item proposes to tackle down this issue by specifying the implementation details of the contactless communication protocol between ticketing media and readers within IFM systems. Considered contactless communication protocols are ISO/IEC 14443 – Parts 1 to 4 and associated testing methods defined by ISO/IEC 10373-6. The repository will be applicable: - to any contactless terminal requiring to interact with a ticketing contactless media, and acting as an ISO/IEC 14443 PCD (reader) - to any contactless media requiring to host a ticketing application, and acting as an ISO/IEC 14443 PICC (card) In addition, the repository shall satisfy the following requirements: - Allow the acceptance of various form factors of contactless media such as smart cards in ISO ID1 format, contactless USB keys and contactless NFC phones. - Facilitate the migration plan of existing ticketing terminals and minimize their migration cost, taking into account as much as possible ex ...
  • No reference

    05-10-2012
    00144297

    Agricultural and forestry machinery - Combined fire wood processors - Safety

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies safety requirements, and their verification for the design and construction of firewood processors, intended for making firewood. Firewood processor is a combined machine that cuts the processed wood either with a chain blade or with a circular saw and splits the wood with a wedge splitter. In addition it specifies the type of information on safe working practices provided by the manufacturer. This standard deals with all significant hazards, hazardous situations and hazardous events relevant to firewood processors when they are used as intended and under the conditions foreseen by the manufacturer. NOTE The list of significant hazards is given in Annex A. This document is applicable for manual, semiautomatic and automatic firewood processors. This standard does not deal with wedge splitters dealt with in EN 609-1. Environmental aspects have not been considered in this standard. This European Standard is not applicable to firewood processors which are manufactured before the date of publication of this document by CEN.
  • No reference

    05-10-2012
    00162353

    Determination of protective material resistance to permeation by chemicals - Part x: permeation by chemical of seams, joins, assemblages and closures

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies a test method for the determination of the resistance of seams, joins assemblages and closures of protective clothing, gloves and footwear to permeation by potentially hazardous liquid chemicals under the condition of continuous contact. This test method is applicable to the assessment of protection against liquid chemicals that can be collected only by liquid or gaseous collecting media.
  • No reference

    05-10-2012
    00162355

    Guidelines for selection, use, care and maintenance of protective clothing against foul weather, wind and cold

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This document gives guidance on selection, use, care and maintenance of protective clothing against foul weather, wind and cold giving additional information to TR 15321
  • No reference

    12-10-2012
    00148016

    Continuous handling equipment and systems - Safety requirements for cash desks

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European standard deals with the technical requirements to minimise the hazards listed in Clause 4. These hazards can arise during the operation and maintenance of continuous handling equipment and systems when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard deals with safety related technical verification during commissioning. This standard applies to mechanical handling devices defined in Clause 3, and designed for cash desks mainly used in public areas. This European Standard deals with the technical requirements for electromagnetic compatibility (EMC).
  • No reference

    19-10-2012
    00319017

    Condition assessment methodologies

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The document deals with the methodologies of condition assessment for all types of structures
  • No reference

    19-10-2012
    00159040

    Hearing protectors - Individual fit testing methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This document specifies methods for individual fit testing of hearing protectors
  • No reference

    09-11-2012
    00191266

    Early suppression fast response (ESFR) sprinkler heads.

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies requirements for construction, performance and test method for early suppression fast response (ESFR) sprinkler heads. This standard is intended to cover the ESFR sprinklers having a K factor equal or above 200, used for storage application as defined in EN 12845.
  • No reference

    09-11-2012
    00319019

    Maintenance management - Guidelines

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This technical specification defines a framework for maintenance management, including assessment and benchmarking
  • No reference

    16-11-2012
    00264160

    Stationary source emissions - Reference method for the determination of CO2 concentration and mass emissions

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies a reference method for the determination of CO2 concentration and mass emission rates from stationary source emissions. The method is applicable for the calibration of continuous CO2 emissions monitors and for the provision of periodic and short-term measurement of CO2 concentration and mass emission rates. The target uncertainty for the method should be +/- 1 % for CO2 concentration and 2,5 % for mass emission rates. This European Standard supports the requirements of EU Directives 2003/87/EC and 2009/29/EC.
  • No reference

    23-11-2012
    00109043

    Measurement of the seasonal efficiency of hybrid appliances (gas fired appliance combined with electrical heat pump in one casing ) . Performance standard to sort out all elements needed for measurements for the seasonal space heating energy efficiency of hybrid appliances .

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Applicable to gas fired appliances (gas heat input not exceeding 70kw) combined with heat pump with electrically driven compressor according to EN 16417 This new standard does not apply for gas boilers with recovery systems using combustion products as heat source for the electrical heat pump
  • No reference

    07-12-2012
    00299025

    Gas-fired endothermic engine heat pumps - Part 2: Safety

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies safety aspects for Gas-fired endothermic engine heat pumps
  • No reference

    04-01-2013
    00292084

    Characterization of waste - Framework for the preparation and application of a testing programme - General information on content tests and leaching tests

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    This CEN/TR is to provide comprehensive information on two key aspects ofwaste testing, content and leaching. Some information is already available as informative annex in certain standard prepared by CEN/TC 292. But these annexes are not fully coherent and address only partly these two aspects, content and leaching. This CEN/TR provides, for instance for content testing, coherent and comprehensive information on the extraction methods and the interpretation of test results as well as guidance on the choice of such a method. This CEN/TR also provides, for instance for leaching tests, coherent and comprehensive information on the leaching methods, guidance on the selection of the adequate leaching test for the relevant scenario, and the interpretation of test results. In case of mass balance studies content is of relevance. Content is also of relevance for substances that are banned (zero level does not exist) or when leaching is not or not yet feasible for the substances of interest. Analysis of the content of substances in waste or waste derived products is of limited relevance from an environmental impact perspective, as generally only a very minor fraction of the total content of a substance in waste or waste derived product is leachable and thus can be transported from the waste or waste derived product to its surroundings through the water phase. For assessing impact of waste or a waste derived product the application of leaching tests is the preferred approach.
  • No reference

    04-01-2013
    00292085

    Characterization of waste - Framework for the preparation and application of a testing programme - Guidelines for the elaboration of standardised testing methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    This CEN/TS provides guidance for coordination, coherence and interfacing, for harmonised concepts such as blank test, harmonised specific vocabulary and definitions used in the field of waste testing....etc. This is now needed and useful since CEN/TC 292 is now entering a period of possible revision of the already published standards. This can be done in a structured and coherent way using experiences and requirements given in this Technical specification. As shown in annex B and sub-clause 4.2.2 of prEN 16457, testing a waste parameter requires the use of several standards in order to cover all the testing steps. Therefore coordination, coherence and interfacing are critical for the testing quality.
  • No reference

    18-01-2013
    00161082

    PPE footwear - orthopaedic footwear

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Specifies test methods and requiirements for orthopaedic footwear
  • No reference

    01-02-2013
    00153177

    Steaker/Strip cutter and meat tenderizer

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Steaker/Strip cutter and meat tenderizing machines for industrial meat processing factories and butcheries
  • No reference

    01-02-2013
    00256669

    Railway applications - Air conditioning for rolling stock - Safety relevant aspects

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies requirements for safety aspects of the Air Conditioning systems, including - CO2 maximum admissible rate as required by the TSI ""Locomotives and Passengers RST""- rate and nature of germs in the ambient air, - particles rate in the air, - refrigerant toxicity, - maximum admissible couple temperature/humidity in case of air conditioning failure by hot summer conditions, - heating and cooling safety devices, - mechanical resistance.
  • No reference

    01-02-2013
    00153176

    Meat pressing machines

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Meat pressing machines for industrial meat processing factories and butcheries
  • No reference

    08-02-2013
    00050024

    Lightings columns - Part 1: Definitions and general requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Combination of the actual EN 40-1 and EN 40-2 considering the revised scope of CEN/TC 50 (N 654)
  • No reference

    08-02-2013
    00050025

    Lightings columns - Part 2: Requirements for steel, aluminum, fibre reinforced polymer composite and reinforced and prestressed concrete lighting columns

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Revision of EN 40-5:2002, EN 40-6:2002, EN 40-4:2005 and EN 40-7:2002
  • No reference

    08-02-2013
    00050026

    Lighting columns - CPR requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    - Revision of Annex ZA of the EN 40 parts 4, 5, 6 and 7, - Integration of environmental aspects in EN 40 parts 4, 5, 6 and 7.
  • No reference

    08-02-2013
    00264161

    Stationary source emissions - Mercury monitoring using sorbent traps

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies a procedure to use solid sorbent trap systems for measuring the concentration of mercury (Hg – oxidized, elemental and particulate) to the atmosphere from industrial stacks and flues. This method may be used instead of EN 13211 (wet chemical method for mercury) and EN 14884 (AMS method for mercury). This new standard will be based on US EPA Method 30B – K tubes/sorbent traps. This standard describes the methodology and equipment required, including the sampling system, sample gas conditioning system, and sorbent materials togehter with details of the sample extraction methods to prepare the sample for analysis. The method described in this standard is a batch-based system for collecting a total sample of mercury over a predetermined period of time. The concentration is then averaged over the sample period. The system is recommended for use in at least duplicate trains. This standard would be developed for compliance assessment monitoring as well as calibration and verification work under applicable standards and EC Directives including the regulatory monitoring required by EC Directives for waste incineration, large combustion plant and integrated pollution prevention and control. Annual mercury monitoring is required under the new EU IED.
  • M323890

    03-04-2018
    00301066

    Road vehicles – Machines for mounting and demounting vehicle tyres – Safety requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This Standard specifies the safety requisites requirements and their verification for the design and building of machines (see the definition in point 3.2) for mounting and demounting tyres on the vehicles listed below and identified according to the international categories M1, M2, N1, O1, O2, L4 and L5: a) cars b) buses c) lorries d) motor-vehicles for specific or special transport e) mobile homes f) cargo trailers g) car trailers h) motorised quadricycles i) motor vehicles j) mopeds k) agricultural machines (if the wheel/tyre dimensions are compatible with the maximum dimensions indicated in the tyre changer user instructions) The vehicles listed in points a) to f) must have an overall full-load mass no greater than 3.5 t. These machines are designed to ensure the tyre is correctly fitted on the wheel in safe conditions. The standard describes how to eliminate or reduce the risks resulting from the foreseen use (or improper but reasonably foreseeable use) of these machines by the operator during normal operation and service. In addition, it specifies the type of information that the manufacturer must supply with regards to safe working procedures. The Standard describes all the significant hazards (as listed in Table 1) and the danger situations and events relating to these machines. This Standard does not apply to hazards regarding maintenance or repairs carried out by professional maintenance personnel.