Velkommen til portalen for nye arbejdsemner

3465 Hits

ISO/TC 163/SC 3/WG 12

  • No reference

    05-10-2012
    WSGPE001

    Good Practice for an Integrated Approach on Thermal Energy Audits

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Workshop Agreement will lay out an integrated approach on thermal energy audits, based on the EINSTEIN methodology, guiding the user through the whole auditing procedure, from preparation of visit and data acquisition, to data processing, to the evaluation of alternative solutions and reporting. The EINSTEIN approach for thermal energy audits, which will be referred to, is described in detail in the document 'Guide for EINSTEIN Thermal Energy Audits' and complementary documents, available for download at http://www.einstein-energy.net/tool-kit. The methodology is implemented in the EINSTEIN software tool, also available from the above mentioned website.
  • No reference

    08-12-2014
    00216088

    Chemical disinfectants and antiseptics - Virucidal Hygienic handrub - Test method and requirements (phase 2/step 2)

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a test method simulating practical conditions for establishing whether a product for hygienic handrub reduces the release of virus contamination on hands when rubbed onto the artificially contaminated hands of volunteers. NOTE 1 Attention is drawn to the fact that tests on human volunteers are the subject of legal provisions in certain European countries/regions. This European Standard applies to products for hygienic handrub for use in areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example: – in hospitals, in community medical facilities and in dental institutions; – in clinics of schools, of kindergardens and of nursing homes. and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patient. EN 14885 specifies in detail the relationship of the various tests to one another and to use recommendations. NOTE 2 This method corresponds to a phase 2, step 2 test.
  • No reference

    15-02-2013
    00278348

    Electronic fee collection - Interoperable application profiles for information exchange between Service Provision and Toll Charging

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The standard on Information exchange between service provision and toll charging (EN ISO 12855) is a so-called tool-box standard. As such it is provides useful but not sufficient support to ensure technical interoperability. The aim of this work item is to produce a profile standard that provides appropriate technical interoperability support the EFC information exchange between Service Providers (SPs) and Toll Chargers (TCs): - based on DSRC - based on GNSS/CN - autonomous systems - and potentially also video-based systems This standard will cover the definition of interoperable application profiles (IAP) applicable for the use of EN ISO 12855. These profiles define a specific set of parameter options, parameter values and procedures for an interoperable exchange of data between the central equipments of TCs and Toll SPs in Europe. It specifies which of the optional parts of the information objects to use and defines transfer mechanisms and supporting functions not defined in the base standard to ensure the interoperability between TCs and Toll SPs. This profile standard will cover: - Exchange of information between the Central Equipments of the two roles Service Provision and Toll Charging e.g. o Charging related Data (Exception list, Toll declarations, Billing details) o Administrative Data (Trust objects, Context data, QA parameters, Address data for enforcement) o Confirmation Data - Transfer mechanisms and supporting functions - Information objects, data syntax and semantics - Implementation conformance statement proforma, as a basis for assessment of conformity to specification - potentially illustrated by examples of data interchanges (informative) This IAP will be defined using the concept of ""International Standardised Profiles (ISP)"" as defined in ISO/IEC TR 10000-1. The ISP-concept is specifically suited for defining interoperability specifications where a set of base standards can be used in different ways. This is exactly the ca ...
  • No reference

    15-02-2013
    00351020

    Construction products - Assessment of release of dangerous substances - Determination of dose assessment and classification for emitted gamma radiation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report discusses approaches on gamma dose assessment. It also presents a method for calculating the external gamma dose from construction products that could be a basis for development of a harmonized European approach for estimation of gamma radiation doses caused by construction products.
  • No reference

    07-01-2015
    00396008

    Earthworks - Continuous Compaction Control (CCC)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard provides guidance, specifications and requirements on the use of Continuous Compaction Control (CCC) as a quality control method in earthworks by means of roller integrated measuring and documentation systems. The CCC method is suitable for soils, granular materials and rockfill materials which can be compacted using vibratory rollers. NOTE: A continuous Compaction Control (CCC) technology based on the measure of propel energy necessary to overcome the rolling resistance is also available and can be used as a quality control method in earthworks. The propelling power of the compactor provides an indication of the material stiffness and it is measured as a function of the machine ground speed, slope angle and rolling resistance. This method is not included in this document.
  • No reference

    15-07-2013
    EC110226

    Fittings for the food, chemical and pharmaceutical industries_Clamp connections for stainless steel tubes_ Weld-on type

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard is valid for dimensions, design and material of clamp connections for butt-welding, the long version (stub form KL) is intended for orbital welding. The clamp connections are designed for the following admissible pressure ratings: -Outside tube diameter from 6.35 mm up to 42.4 mm: 2.5 MPa (25 bar); -Outside tube diameter from 48.3 mm up to 76.2 mm: 1.6 MPa (16 bar); -Outside tube diameter from 85.0 mm up to 219.1 mm: 1.0 MPa (10 bar). The admissible pressure ratings are configured for a temperature range of -10°C to +140°C using appropriate clamps and gasket compounds.
  • No reference

    15-07-2013
    00312037

    Thermal Solar Systems and components-Code of Practice - Minimizing the risk of Legionella in solar assisted hot water systems

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This code of practice provides recommendations on solar assisted hot water systems that minimize the risk of Legionella infection by the user of, and others exposed to, solar system. For the sake of completeness, recommendations on solar – only systems, although out of the scope oof the CEN/TR 16355 technical report, are provided in separate Annex B. This report is limited to solar assisted hot water systems: -with a solar collector that uses a liquid as the heat transfer fluid and is eqipped with a transparent cover; and - with one solar heat storage tank with a volume, dedicated to the storage of solar thermal energy, larger than 25 litres per square metre solar collector (aperture). This report supplements the CEN/TR 16355 technical report
  • No reference

    23-10-2013
    00169067

    Energy performance of buildings - Energy requirements for lighting - Part 2: Technical Report to EN 15193-1

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report will provide information to support the correct understanding, use and national implementations of EN 15193–1. It will give explanations on the procedures and background information. It will also provide justifications of the choices that have been made and give validations of the calculation procedures given in the standards. It will give detailed examples to illustrate the total workings of the standard.
  • No reference

    31-10-2013
    00228074

    CEN/TR 15316-6-8 Heating systems and water based cooling systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 6-8: Accompanying TR to EN 15316-4-5 (District heating and cooling)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15316-6-8) specifies details for EN 15316-4-5 and gives additional information for the application of EN 15316-4-5.
  • No reference

    31-10-2013
    00228066

    CEN/TR 15459-2 Heating systems and water based cooling systems in buildings — Energy performance of buildings — Part 2: Accompanying TR to EN 15459-1 (Economic evaluation procedure for energy systems in buildings)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15459-2) specifies details for EN 15459-1 and gives additional information for the application of EN 15459-1.
  • No reference

    31-10-2013
    00228072

    CEN/TR 15316-6-5 Heating systems and water based cooling systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 6-5: Accompanying TR to EN 15316-4-2 (Space heating generation systems, heat pump systems)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15316-6-5) specifies details for EN 15316-4-2 and gives additional information for the application of EN 15316-4-2.
  • No reference

    31-10-2013
    00228077

    CEN/TR 15316-6-3 Heating systems and water based cooling systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 6-3: Accompanying TR to EN 15316-3 (Space distribution systems (DHW, heating and cooling))

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15316-6-3) specifies details for EN 15316-3 and gives additional information for the application of EN 15316-3.
  • No reference

    31-10-2013
    00228070

    CEN/TR 15316-6-1 Heating systems and water based cooling systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 6-1: Accompanying TR to EN 15316-1 (General and Energy performance expression)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15316-6-1) specifies details for EN 15316-1 and gives additional information for the application of EN 15316-1.
  • No reference

    31-10-2013
    00228064

    CEN/TR 15316-6-7 Heating systems and water based cooling systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 6-7: Accompanying TR to EN 15316-4-4 (Heat generation systems, building-integrated cogeneration systems)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15316-6-7) specifies details for EN 15316-4-4 and gives additional information for the application of EN 15316-4-4.
  • No reference

    31-10-2013
    00228065

    CEN/TR 15316-6-9 Heating systems and water based cooling systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 6-9: Accompanying TR to EN 15316-4-8 (Space heating generation systems, air heating and overhead radiant heating systems, including stoves (local))

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15316-6-9) specifies details for EN 15316-4-8 and gives additional information for the application of EN 15316-4-8.
  • No reference

    31-10-2013
    00228067

    CEN/TR 15378-2 Heating systems and water based cooling systems in buildings — Heating systems and DHW in buildings — Part 2: Accompanying TR to EN 15378-1 (Inspection of boilers, heating systems and DHW)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15378-2) specifies details for EN 15378-1 and gives additional information for the application of EN 15378-1.
  • No reference

    31-10-2013
    00228068

    CEN/TR 12831-2 Heating systems and water based cooling systems in buildings — Method for calculation of the design heat load — Part 2: Accompanying TR for EN 12831-1 (Space heating load)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 12831-2) specifies details for EN 12831-1 and gives additional information for the application of EN 12831-1.
  • No reference

    31-10-2013
    00228069

    CEN/TR 12831-4 Heating systems and water based cooling systems in buildings — Method for calculation of the design heat load — Part 4: Accompanying TR to EN 12831-3 (Domestic hot water systems heat load and characterisation of needs)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 12831-4) specifies details for EN 12831-3 and gives additional information for the application of EN 12831-3.
  • No reference

    31-10-2013
    00228071

    CEN/TR 15378-4 Heating systems and water based cooling systems in buildings — Heating systems and DHW in buildings — Part 4: Accompanying TR to EN 15378-3 (Measured energy performance)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15378-4) specifies details for EN 15378-3 and gives additional information for the application of EN 15378-3.
  • No reference

    31-10-2013
    00228073

    CEN/TR 15316-6-6 Heating systems and water based cooling systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 6-6: Accompanying TR to EN 15316-4-3 (Heat generation systems, thermal solar and photovoltaic systems)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15316-6-6) specifies details for EN 15316-4-3 and gives additional information for the application of EN 15316-4-3.
  • No reference

    31-10-2013
    00228075

    CEN/TR 15316-6-10 Heating systems and water based cooling systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 6-10: Accompanying TR to EN 15316-5 (Space heating and DHW storage systems (not cooling))

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15316-6-10) specifies details for EN 15316-5 and gives additional information for the application of EN 15316-5.
  • No reference

    31-10-2013
    00228076

    CEN/TR 15316-6-2 Heating systems and water based cooling systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 6-2: Accompanying TR to EN 15316-2 (Space emission systems (heating and cooling))

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15316-6-2) specifies details for EN 15316-2 and gives additional information for the application of EN 15316-2.
  • No reference

    31-10-2013
    00228078

    CEN/TR 15316-6-4 Heating systems and water based cooling systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 6-4: Accompanying TR to EN 15316-4-1 (Space heating and DHW generation systems, combustion systems (boilers, biomass))

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report (CEN/TR 15316-6-4) specifies details for EN 15316-4-1 and gives additional information for the application of EN 15316-4-1.
  • No reference

    25-11-2013
    00351026

    Construction products - Assessment of release of dangerous substances - Analysis of non-volatile organic substances in eluates

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Specification specifies existing methods for the determination of non-volatile organic substances in aqueous eluates for the quantification of release from construction products. Covered substances are phenols, PAH, PCB, phthalates, PBDE, organotin, dioxin and furans, biocides and plant protection products. The selection of the method to be applied is based on the product matrix and the required sensitivity.
  • No reference

    25-11-2013
    00351024

    Construction products - Assessment of release of dangerous substances - Content of non-volatile organic substances - Methods for extraction and analysis

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Specification specifies existing methods for the determination of the content of non-volatile organic substances in construction products. Covered substances are phenols, PAH, PCB, phthalates, PBDE, organotin, dioxin and furans, biocides and plant protection products. The selection of the extraction, clean-up and analysis method(s) to be applied is based on the product matrix and the required sensitivity.