Velkommen til portalen for nye arbejdsemner

3474 Hits

ISO/TC 69/SC 4/WG 11

  • No reference

    03-12-2014
    00128142

    Solar Energy systems for roofs: Requirements for structural connections to solar panels

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This technical report provides fuidance on the principles and requirements of structural desing for the safety and serviceability of the structural connection between solar eneergy panels (thermal or photovoltaic) that are mounted on flat or pitched roofs. This technical report does not include requirements for: Weather tightness of the roof, solar panels and connections; Electrical, thermal or mechanical characteristics of the solar panels; Precautions against fire of the installation.
  • No reference

    02-12-2014
    00331109

    Postal services - Interfaces for cross border parcels

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The standard will specify the interface between the e-merchant (any professional customer sending parcels) and the first logistic operator. The interface is composed on two items: • Le physical label stuck on the parcel: contents, sizes, minimum requirements to guarantee the quality and efficiency of the logistic process (sorting, delivery). • The electronic exchanges between the sender and the logistic operator with the description of the data to be provided, the format of the exchanges. The standard may be built in accordance with existing standards (TS15523, EN13619,). The view of the e-merchants must be taken in charge during the construction phase of the standard.
  • No reference

    08-12-2014
    00038190

    Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report describes a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It can also be used to investigate variation between samples of the same species but of different origin.
  • No reference

    17-12-2014
    00188093

    Conveyor belts — Indentation rolling resistance of conveyor belts related to belt width — Requirements, testing

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard defines a method for the determination of the width related indentation rolling resistance of conveyor belts. The goal is that the method easily and quickly delivers values which are reproducible and relevant for the practical use. The test results enable a comparing evaluation and the design of belt conveyors with steelcord and fabric conveyor belts.
  • No reference

    10-12-2014
    00408007

    Proposed limit values for contaminants in biomethane based on health assessment criteria

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • No reference

    19-12-2014
    00136370

    Framework for the competence of inspectors of public playground environments

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This framework forms a guideline for the education, examination and evaluation of the competence of inspectors of public playground environments. For each specific task an inspector may need to perform; this guideline describes the knowledge and experience the inspector needs and also sets out the basic level of knowledge required. The standard EN 1176-1 & 7 details the different types or levels of inspections required to help provide a play environment that is suitable for children to play in. The different types of inspections demand different levels of knowledge and experience; these are: - Routine Visual inspection - Operational inspection - Annual main inspection - Post Installation Inspection As well as these inspections identified in the standard there are also other inspections that are useful in helping to ensure the safe operation of a play environment: - post-accident investigation In this guideline there is a broad explanation of what these inspections are and how they should be performed. This guideline is not intended for certification bodies. Due to the variety of items that can be encountered in the playground environment this guideline can be used for the following equipment: Playground equipment EN 1176 part 1 – 11 Skateboard infrastructures EN 14974 Free access Multi Sport equipment EN 15312 Adventure Playgrounds Outdoor Exercise Equipment DIN79000 Parkour equipment As well as the equipment mentioned in this guideline other items that are on and around the play environment may need to be assessed depending on their interaction with the play environment where users can access these features for informal play e.g. gates, fences, plants, natural play features, rocks, boulders landscape features, art features, etc. Because there features are not encompassed within the standard for playground equipment these items will require risk assessment; but knowledge of the meaning and intention of the standard forms a vital part of this risk ...
  • No reference

    23-01-2015
    EC110229

    Umbrella EN for EN10242, EN 10284 and EN 10344 Buried and above ground piping components for fluids - Requirements and test/assessment methods for fittings made of malleable cast iron

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies product characteristics for fittings made of malleable cast iron for pressure applications for water supply, irrigation, fire fighting, fuels, oils, compressed air and gases as well as for any other pressure application in which other liquids are conveyed with the exception of water intended for humanconsumption. Pipes and fittings covered by this European Standard are intended to be used for buried or above-ground conveyance for both outside and inside buildings. Joints are made with jointing threads in accordance with EN 10226-1 and EN 10226-2 or compression joints. It gives the associated test/assessment methods. This European Standard does not cover valves, adhesives, joint sealings and gaskets.
  • No reference

    05-02-2015
    00151428

    Road operation machinery - Safety - Part 1: General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the common safety requirements for road operation machinery. This document deals with the significant hazards common to road operation machinery, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping). NOTE – The requirements specified in this part of the standard are common to two or more families of road operation machinery. This document gives safety requirements for all types of road operation machinery and shall be used in conjunction with one of parts x to xx. These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of road operation machinery in question. This European Standard applies to: a) Road surface cleaning machines (as currently defined in EN 15429-1); b) Winter service machines (as defined in group 1 and 2 of EN 15144); c) Road service area maintenance machines for:  grass cutting (see Clause 3.1.1.1 of EN 15436-1:2008);  brush/hedge cutting (see Clause 3.1.1.2 of EN 15436-1:2008);  mechanical plant/branch cutting (see Clauses 3.1.2 and 3.2.3 of EN 15436-1:2008). This standard deals with: a) equipment permanently mounted on carrier vehicles; b) interchangeable equipment; c) self-propelled machinery with an integrated specially designed chassis; d) trailed machines; e) interfaces. For multipurpose machinery the parts of the standard that cover the specific functions and applications have to be used, e.g. sweeper used for spreading thawing material or snow removing machines with brooms and ploughs shall use the relevant requirements of prEN xxx parts x, x, x. Road operation machinery within the scope of prEN xxx parts x to x may include interchangeable auxiliary equipment within the scope of prEN ...
  • No reference

    05-02-2015
    00151445

    EN 474 Earth-moving machinery – Safety – Part 13: Requirements for rollers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for earth-moving machinery – hydraulic excavators when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 474-1. This document does not repeat the requirements from EN 474-1, but adds or replaces the requirements for application for earth moving machinery – rollers. This part of EN 474 is not applicable for seated ride-on operated rollers with a drum width less than nominal 0,8 m.
  • No reference

    05-02-2015
    00151423

    Road operation machinery - Safety - Part 4-1: Road service area maintenance machines - Requirements for grass and brush/hedge cutting machines

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for road service area maintenance machines – grass and brush/hedge cutting machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in prEN xxx-1:20xx. This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for road service area maintenance machines – grass and brush/hedge cutting machines.
  • No reference

    05-02-2015
    00151429

    Road operation machinery - Safety - Part 2: Requirements for road surface cleaning machines

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for road surface cleaning machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in prEN xxx-1:20xx. This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for road surface cleaning machines.
  • No reference

    05-02-2015
    00151427

    Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for winter service machines – snow cleaning machines with rotating tools when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in prEN xxx-1:20xx. This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for winter service machines – snow cleaning machines with rotating tools.
  • No reference

    05-02-2015
    00151424

    Road operation machinery - Safety - Part 3-2: Winter service machines - Requirements for snow ploughs

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for winter service machines – snow ploughs when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in prEN xxx-1:20xx. This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for winter service machines – snow ploughs.
  • No reference

    05-02-2015
    00135025

    Information for clarification of the scope of EN 1090-1

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    To give information that clarifies the scope of EN 1090-1 and lists examples of products not covered by the scope of EN 1090-1
  • No reference

    05-02-2015
    00151426

    Road operation machinery - Safety - Part 3-3: Winter service machines - Requirements for spreading machines

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for winter service machines – spreading machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in prEN xxx-1:20xx. This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for winter service machines – spreading machines.
  • No reference

    11-02-2015
    00225081

    Information technology - Automatic identification and data capture techniques - Electronic identification plate

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The standard defines, how to enhance a type plate with an RFID transponder and if applicable a 2D symbol, and how to structure the data. With a type plate the manufacturer or maintenance agent marks an object with identifying, describing or classifying data, that are required to relate the object to an order, for the usage of the object or its maintenance. Type plates are often required to fulfill laws or legal regulations of an industrial sector. Typically on the type plate the manufacturer, type designation of the object and the most important technical data are printed. The object-data can be stored in the memory of an RFID transponder. Hereto the transponder is accessed via a write/read-device via radio. In addition the same data content or a part of it can be stored in a 2D-code, which is captured via an optical scanner. The standard defines the wireless communication with the write/read-device, the structure of the data that are stored on the transponder and the communication with the superordinate IT-system. The standard does not make any definitions for the human readable components on an type plate.
  • No reference

    09-03-2015
    EC110230

    Welded fittings for the food and chemical industries - Tees, bends and reducers for welding

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies dimensions, tolerances, internal and external surface characteristics and marking of welded fittings for the food and chemical industry
  • No reference

    16-03-2015
    00386023

    Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This specification describes a method for assessing the performance of photocatalytic inorganic materials contained in cement mortars and/or limes or ceramic-based matrices, paints or materials deposited as thin films or coatings on a variety of substrates for the photocatalytic abatement of nitric oxide in the gas phase. This method is not suitable for the assessment of samples to be applied with flow perpendicular to the surface or flow permeating the surface itself as polymeric and paper filters, honeycomb structures and suchlike. The performance for the photocatalytic specimen under test is evaluated by measuring the degradation rate of nitric oxide (NO) using the method described herein. The photocatalytic abatement rate is calculated from the observed rate by eliminating the effects of mass transfer. The intrinsic photocatalytic abatement rate is an intrinsic property of the material tested and makes it possible to distinguish the photocatalytic activities of various products with an absolute scale defined with physical and engineering meaning. For the measurements and calculations described in this specification the concentration of nitrogen oxides (NOx) is defined as the stoichiometric sum of nitric oxide (NO) and nitrogen dioxide (NO2).
  • No reference

    16-03-2015
    00386020

    Photocatalysis - Water purification - Performance of photocatalytic materials by measurement of phenol degradation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European standard describes a test method to evaluate the performance of photocatalytic materials in water purification using measurement of phenol degradation. This test method is applicable to photocatalytic materials in form of powders (suspensions in water, slurries) under irradiation
  • No reference

    01-04-2015
    00019499

    Pyrolysis products - Fast pyrolysis bio-oils for stationary internal combustion engines – Quality designation

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the quality for marketed and delivered stationary engine fuel derived from fast pyrolysis oil processes. It is applicable to fast pyrolysis oils for use in stationary internal combustion engines and related power generating equipment. It is intended as an alternative to or blending component in fuel oil for stationary applications.
  • No reference

    18-03-2015
    00428002

    e-Competence Framework (e-CF) - Part 2: User guide

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This technical report supports understanding, adoption and use of the prEN 00428001. This technical report helps: - to understand the overall context, background and aims of the prEN 00428001; - to understand the main principles and methodological choices underpinning the prEN 00428001; - to enable Information and Communication Technology (ICT) stakeholders - ICT service, user and supply companies, ICT professionals, managers and human resource (HR) departments, vocational education institutions and training bodies including higher education, social partners ( trade unions and employer associations), professional associations, accreditation, validation and assessment bodies, market analysts and policy makers and other organizations and stakeholders in public and private sectors. – across Europe, to adopt, apply and use the framework in their environment.
  • No reference

    13-04-2015
    00127321

    Uncertainty of measurement - single burning item

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    TR 'Uncertainty of measurement - single burning item'
  • No reference

    10-12-2015
    JT005127

    Space produce assurance - Quality and safety assurance for space test centres

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This Standard specifies quality assurance and safety assurance requirements for space test centres, applicable to the test process, test personnel (both, of the customer and the space test centre), test facilities, test environment and any operations related to the test specimen under responsibility of the space test centre as requested by the customer. This standard may be tailored for the specific characteristic and constraints of a space project in conformance with ECSS-S-ST-00.
  • No reference

    06-03-2018
    00038155

    Efficacy of antitermitic products

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This standard specifies methods for testing antitermite acting products which takes into account different modes of action, e.g. toxicity or repellency (to complete EN 117: 2005 and EN 118: 2005 on the evaluation of actual termiticides.
  • No reference

    23-05-2016
    00166076

    Chimneys - Accessories - Part 1: Silencers - Requirements and test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European standard specifies the requirements and test methods for silencers that are used as components, carrying flue gases, in order to reduce the noise which comes from combustion appliances (e. g. heating appliances, generators, CHP-units). Components tested together with the liner or system chimney are not covered by this standard.