Velkommen til portalen for nye arbejdsemner

3479 Hits

ISO/TC 69/SC 4/WG 11

  • prEN 8.2125

    01-02-2013
    04003626

    Series, Connectors, optical, circular, single and multichannel 1.25mm contact, coupled by self-locking ring, Operating temperatures -65ºC to +150°C continuous

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 8.5137

    01-02-2013
    04003643

    Aerospace series - Polyetheretherketone extrusions reinforced with 30 % glass fibre by mass (PEEK-GF30) for military aerospace applications - Material Specification

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 8.2124

    01-02-2013
    04003625

    Minature, High Density, Circular Connector (M38999 Seies III / EN 3645 connector using size 23 contacts)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 8.7009

    15-01-2015
    04003924

    Emergency Breathing Systems (EBS)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 8.2132

    15-01-2015
    04003922

    Aerospace series - Minature Connectors, electrical, circular,scoop-proof, triple start threaded coupling , operating temperature 175°C or 200°C continuous, Part 001: Technical specification

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 8.2130

    15-01-2015
    04003921

    Aerospace series - Heat shrinkable moulded shapes Part 001: Technical specification

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 8.2133

    15-01-2015
    04003923

    Aerospace series — Connectors, electrical, micro-circular, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • NP IWA 10

    02-02-2012
    10

    Evaluation Capacity Development (ECD)

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • NP IWA 21

    27-02-2015
    070601

    International harmonized method(s) for a coherent quantification of CO2 emissions of Freight Transport

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • NP IWA 22

    05-06-2015
    070602

    Information security requirements for lottery and gaming operations

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • CEN/CLC Guide 33

    04-04-2016
    JGUID010

    Guide for addressing environmental issues in testing standards

    Oprindelse:
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • CLC/prTS 50XXX

    15-04-2014
    25366

    Tests demonstrating compliance to requirements for the connection of generating plants in parallel with a LV or a MV distribution network

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 50XXX

    29-10-2014
    58614

    Voltage regulation distribution transformer

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This standard applies to voltage regulating devices for medium voltage transformers with highest voltage for equipment up to 36 kV or low voltage networks with highest voltage for equipment of 1,1 kV. Voltage Regulating Transformers and other devices equipped with additional components to control input or output voltage for on load voltage regulation purposes. Transformers covered by this standard comply with the relevant requirements prescribed in the IEC 60076 standards. The object of this document is to lay down requirements to define number of steps, range of the regulation and testing of medium voltage transformers with on load voltage regulation system
  • prEN 50XXX

    17-03-2015
    59878

    Alarm systems - generic cables for wired interconnections

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This European Standard provides a minimum standard for cables for wired interconnections using generic cable. It specifies appropriate markings for claims of compliance. It is not applicable where the equipment manufacturer, or others, specify a particular cable type with more stringent requirements.
  • prEN 50XXX

    05-09-2018
    67769

    Guidelines and requirements for Remote Services for fire safety and security systems

    Oprindelse:
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the minimum requirements for secure remote services (e. g. via IP connections) to the following systems: a) fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems, b) security systems including, but not limited to, intruder and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems, c) social alarm systems, d) a combination of such systems The scope doesn´t cover: a) the alarm transmission infrastructure, b) the use of remote access performed by end-users
  • prEN 50XXX

    29-08-2018
    JT005163

    Space project management – Integrated logistic support

    Oprindelse:
    CLC
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    The scope of the document includes generic ILS management activities and shall consider all aspects of the ILS elements lifetime in space system applications such as Design, Development phases, AIT, storage, prelaunch, launch, operational and disposal phases . It also provides requirements on the policy, implementation and responsibilities for the application of the ILS specifications. It does not specify the use of specific tools, but establishes the essential information required to initiate, maintain and schedule the ILS activities, that apply through the entire Product life cycle, as well as the necessary deliverables.
  • prEN 54-10 rev

    18-12-2015
    00072121

    Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements, test methods and performance criteria for point-type, flame detectors that detect the radiation from the flames generated during the combustion of carbon based materials for use in fire detection systems installed in and around buildings. Flame detectors having special characteristics suitable for the detection of specific fire risks are not covered by this standard e.g. flame detectors that are used solely to detect metal fires or hydrogen fires (although the standard may be used as guidance in assessing such products). The performance requirements for any additional functions are beyond the scope of this standard (e.g. additional features or enhanced functionality for which this standard does not define a test or assessment method).
  • prEN 54-17 rev

    15-06-2012
    00072099

    Fire detection and fire alarm systems - Part 17: Short-circuit isolators

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies requirements, test methods and performance criteria for short-circuit isolators, for use in fire detection and fire alarm systems for buildings (see EN 54-1). Means of isolation or protection incorporated within control and indicating equipment (Item B in Figure 1 of EN 54-1:1996) are not covered by this European Standard.
  • prEN 54-2 rev

    21-08-2014
    00072120

    prEN 54-2 rev Fire detection and fire alarm systems - Part 2: Control and indicating equipment

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements, methods of test, and performance criteria for control and indicating equipment (see item B of figure 1 of EN 54-1:2011) for use in fire detection and fire alarm systems installed in buildings.
  • prEN 54-20 rev

    11-12-2015
    00072127

    Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements, test methods and performance criteria for aspirating smoke detectors for use in fire detection and fire alarm systems installed in buildings. Aspirating smoke detectors developed for the protection of specific risks that incorporate special characteristics (including additional features or enhanced functionality for which this standard does not define a test or assessment method) are also covered by this standard. The performance requirements for any special characteristics are beyond the scope of this standard. NOTE – Certain types of detector contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not therefore specified in this standard.
  • EN 54-3:2014/prA1

    10-11-2014
    00072123

    Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements, test methods and performance criteria for fire alarm sounders, including voice sounders, in a fixed installation intended to signal an audible warning between the fire detection and fire alarm systems and the occupants of a building (see EN 54-1:2011). This European Standard provides for the assessment and verification of constancy of performance (AVCP) of fire alarm sounders to this EN. This European Standard is not intended to cover: a) loudspeaker type devices primarily intended for emitting emergency voice messages that are generated from an external audio source; b) supervisory sounders, for example, within the control and indicating equipment.
  • EN 54-5:2017/prA1

    27-09-2017
    00072143

    Fire detection and fire alarm systems – Part 5: Heat detectors – Point heat detectors

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements, test methods and performance criteria for point heat detectors intended for use in fire detection and fire alarm systems installed in and around buildings (see EN 54-1:2011). This European standard provides for the evaluation of conformity (EoC) of point heat detectors to this EN. For other types of heat detector, or for detectors intended for use in other environments, this standard should only be used for guidance. Heat detectors with special characteristics and developed for specific risks are not covered by this standard.
  • EN 54-7:2015/prA1

    27-09-2017
    00072142

    Fire detection and fire alarm systems – Part 7: Smoke detectors – Point detectors using scattered light, transmitted light or ionization

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This draft European Standard specifies requirements, test methods and performance criteria for point smoke detectors that operate using scattered light, transmitted light or ionization, intended for use in fire detection and fire alarm systems installed in and around buildings (see EN 54 1:2011). This European standard provides for the assessment of verification of consistency of performance (AVCP) of point smoke detectors to this EN. For other types of smoke detector, or smoke detectors working on different principles, this standard should only be used for guidance. Smoke detectors with special characteristics and developed for specific risks are not covered by this standard. NOTE – Certain types of detector contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not specified in this standard.
  • prEN 71-10 rev

    08-01-2010
    00052087

    Safety of toys - Part 10: Organic chemical compounds - Sample preparation and extraction

    Oprindelse:
    CEN
    International kategori
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • EN 71-1:2014/prA1

    16-12-2014
    00052118

    Safety of toys - Part 1: Mechanical and physical properties - Amendment 1: Cords and drawstrings in toys and packaging

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    See EN 71-1:2014