Velkommen til portalen for nye arbejdsemner

3474 Hits

ISO/TC 69/SC 4/WG 11

  • prEN 71-11 rev

    08-01-2010
    00052088

    Safety of toys - Part 11: Organic chemical compounds - Methods of analysis

    Oprindelse:
    CEN
    International kategori
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • EN 71-14:2014/prA1

    05-02-2016
    00052125

    Safety of toys - Part 14: Trampolines for domestic use

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements and test methods for trampolines for domestic use, their access devices and their enclosures, intended for outdoor and/or indoor use above ground level by one person at a time. The scope of this European Standard excludes: - trampolines used as gymnastic equipment, covered by EN 13219; - floating inflatable trampolines, covered by the EN 15649 series; - trampolines used in public playgrounds; - inclined mat trampolines; - inflatable trampolines; - fitness trampolines, including trampolines for medical use; - trampolines with additional features, e.g. tents, basket ball hoop; - trampolines for domestic use buried at ground level.
  • prEN 71-8 rev

    17-04-2015
    00052113

    Safety of toys - Part 8: Activity toys for domestic use

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements and test methods for activity toys often attached to or incorporating a crossbeam, and similar toys intended for children under 14 years to play on or in and often intended to bear the mass of one or more children. This European Standard also specifies requirements for: - separately sold accessories for, and components of activity toys; - separately sold swing elements that are ready for use on or in combination with an activity toy; - construction packages for activity toys including components used to build activity toys according to a scheduled building instruction. The scope of this European Standard excludes: - playground equipment intended for public use dealt with in EN 1176; - bow-mounted rocking activity toys such as rocking horses and similar toys are covered by specific requirements in EN 71-1; - toy pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool; - toy trampolines. NOTE 1 – Requirements for toy trampolines and non-aquatic inflatable toys are being elaborated. NOTE 2 – There is an enhanced risk of drowning in toy pools where the depth of water is in excess of 400 mm.
  • prEN 71-9 rev

    08-01-2010
    00052086

    Safety of toys - Part 9: Organic chemical compounds - Requirements

    Oprindelse:
    CEN
    International kategori
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • prEN 81-28 rev

    02-02-2016
    00010121

    Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European standard applies to all types of passenger and passenger goods lifts, in particular those covered by the series of EN 81 standards, and may be applied to similar equipment where there is a risk of trapping users. This European standard defines the basic characteristics of an emergency alarm system required within a lift provided for the safety of all users.
  • prEN 81-30

    15-02-2007
    00010056

    Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 30: Electric and hydraulic service lifts

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies the safety rules for the construction and installation of permanently installed new electric service lifts with traction or positive drive, or hydraulic service lifts defined as lifting equipment, serving defined landing levels, having a car, the interior of which is regarded as inaccessible to persons on account of its dimensions and means of construction, suspended by ropes or chains or supported by a ram and moving between rigid vertical guide rails or guide rails whose inclination to the vertical does not exceed 15° and driven electrically or hydraulically. This standard covers service lifts with rated load not exceeding 300 kilogrammes and not intended to move persons.
  • prEN 81-41 rev

    20-01-2016
    00010120

    Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    1.1 This European Standard deals with safety requirements for construction, manufacturing, installation, maintenance and dismantling of electrically powered vertical lifting platforms affixed to a building structure intended for use by persons with impaired mobility: - travelling vertically between predefined levels along a guided path whose inclination to the vertical does not exceed 15°; - intended for use by persons with or without a wheelchair; - supported or sustained by rack and pinion, wire ropes, chains, screw and nut, friction/traction between wheels and the rail, guided chain, scissors mechanism or hydraulic jack (direct or indirect); - with enclosed liftways; - with a speed not greater than 0,15 m/s; - with platforms where the carrier is not completely enclosed 1.2 This standard deals with all significant hazards relevant to lifting platforms, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). 1.3 This European Standard does not specify the additional requirements for: - operation in severe conditions (e.g. extreme climates, strong magnetic fields); - lightning protection; - operation subject to special rules (e.g. potentially explosive atmospheres); - handling of materials, the nature of which could lead to dangerous situations; - vertical lifting platforms whose primary function is the transportation of goods; - vertical lifting platforms whose carriers are completely enclosed; - vertical lifting platforms prone to vandalism; - hazards occurring during manufacture; - earthquakes, flooding; - fire fighting, evacuation and behaviour during a fire; - noise and vibrations; - the design of concrete, hardcore, timber or other foundation or building arrangement; - the design of anchorage bolts to the supporting structure; - type C wheelchairs as defined in prEN 12183 and/or prEN 12184. (....)
  • prEN 81-44

    25-01-2019
    00010139

    Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 44: Lifting appliances in wind turbines

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    1.1 This European standard specifies the safety requirements for the construction and installation of power operated lifting appliances installed permanently in wind turbines and intended for access to workplaces on wind turbines by authorised persons (referred hereafter as a lift). A lift serves defined landing levels and may move persons to working positions where they are carrying out work from the lift and has a carrier which is: a) designed for the transportation of persons and goods; b) guided; c) travelling vertically or along a path within 15 degrees maximum from the vertical; d) supported or sustained by rack and pinion, rope traction drive, drum drive; e) travelling with a speed not more than 0,7 m/s f) operating ambient temperature range between – 20 °C to + 55 °C. 1.2 This document identifies hazards as listed in Clause 4 which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer. 1.3 This document does not specify requirements for: a) operation in severe conditions (e.g. extreme climates, strong magnetic fields); b) lightning protection; c) operation subject to special rules (e.g. potentially explosive atmospheres); NOTE – Directive 2014/34/EU concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 2014/34/EU. d) electromagnetic compatibility (emission, immunity); e) handling of loads the nature of which could lead to dangerous situations; f) the use of combustion engines; g) hydraulic drive units; h) hazards occurring during manufacturing process; i) the use of lifts in floating wind turbines; j) the use during earthquakes; k) Requirements for automatic operated doors. 1.4 This standard is not applicable to: a) builders hoists according to EN 12158-1:2000, EN 12158-2:2000 and EN 12159:2000; b) elevating control stations according to EN 14502-2:2005+A1:2008; c) lifts according to EN 81-20:2014; d) work platforms according to EN 280:2013+A1:2015 and EN 1808:2015 and EN 1495:1997+A2:2009; e) lifts on cranes according to EN 81-43:2009.
  • prEN 81-70 rev

    20-01-2012
    00010103

    Safety rules for the construction and installations of lifts - Particular applications for passenger and good passengers lifts - Part 70: Accessibility to lifts for persons including persons with disability

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the minimum requirements for the safe and independent access and use of lifts by persons, including persons with the disabilities mentioned in annex B, Table B.1. This European Standard covers lifts with minimum car dimensions according to Table 1 and provided with car doors and landing doors constructed as automatic power operated horizontally sliding doors. This European Standard considers accessibility to lifts for persons using wheelchairs with maximum overall dimensions defined in EN 12183:1999 and EN 12184:1999. This European Standard also deals with the additional technical requirements to minimise the hazards listed in clause 4 that arise during the operation of lifts intended to be accessible to disabled users.
  • prEN ISO 105-X16 rev

    29-10-2013
    00248563

    Textiles - Tests for colour fastness - Part X16: Color fastness to rubbing - Small areas (ISO 105-X16:2001)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 105-D02 rev

    29-10-2013
    00248561

    Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents (ISO 105-D02:1993)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 105-X12 rev

    29-10-2013
    00248562

    Textiles - Tests for colour fastness - Part X12: Color fastness to rubbing (ISO 105-X12:2001)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 131-3 rev

    05-06-2014
    00093191

    Ladders - Part 3: Marking and user instructions

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard advises on the safe use of ladders covered by the scope of EN 131-1 and fulfilling the requirements of EN 131-1, EN 131 -2 and, for single or multiple hinged-joint ladders, EN 131-4, for telescopic ladders EN 131-6 and for mobile platform ladders EN 131-7.
  • prEN 144-1 rev

    01-12-2015
    00079164

    Respiratory protective devices - Gas cylinder valves - Part 1: Inlet connections

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the dimensions and tolerances as well as the impact resistance and marking requirements of inlet connections for connecting cylinder valves to gas cylinders for respiratory protective devices (RPD).
  • prEN 144-2 rev

    01-12-2015
    00079165

    Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the dimensions, tolerances and marking requirements of outlet connections for connecting regulators and cylinder valves for respiratory protective devices except those for diving applications.
  • prEN 171 rev

    12-01-2007
    00085065

    Personal eye-protection - Infrared filters - Transmittance requirements and recommended use

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the scale numbers and transmittance requirements for filters for protection against infrared radiation.
  • prEN ISO 177 rev

    20-11-2015
    00249930

    Plastics - Determination of migration of plasticizers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN ISO 178 rev

    12-12-2015
    00249948

    Plastics - Determination of flexural properties

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 196-3 rev

    12-02-2015
    00051134

    Methods of testing cement - Part 3: Determination of setting times and soundness

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the methods for determining standard consistence, setting times and soundness of cements. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the setting time and soundness of a cement is in conformity with its specification. This document describes the reference methods and allows the use of alternative procedures and equipment, as indicated in notes, provided that they have been calibrated against the reference methods. In the event of a dispute, only the reference equipment and procedures are used.
  • prEN 196-6 rev

    23-04-2015
    00051137

    Methods of testing cement - Part 6: Determination of fineness

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes three methods of determining the fineness of cement. The sieving method serves only to demonstrate the presence of coarse cement particles. This method is primarily suited to checking and controlling the production process. The air-jet sieving method measures the retention on sieving and is suitable for particles which substantially pass a 2,0 mm test sieve. It may be used to determine the particle size distribution of agglomerates of very fine particles. This method may be used with test sieves in a range of aperture sizes, e.g. 63 μm and 90 μm. The air permeability method (Blaine) measures the specific surface (mass related surface) by comparison with a reference cement sample. The determination of the specific surface serves primarily to check the consistency of the grinding process of one and the same plant. This method only enables a limited assessment to be made of the properties of the cement in use. NOTE – The air permeability method may not give significant results for cements containing ultrafine materials. The methods are applicable to all the cements defined in EN 197.
  • EN 203-1:2014/prAC

    08-02-2016
    00106C02

    Gas heated catering equipment - Part 1: General safety rules

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • EN 203-2-1:2014/prA1

    15-01-2016
    00106039

    Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements for the construction and operating characteristics relating to the safety, rational use of energy and marking, of atmospheric commercial gas heated open burners, covered burners, non-enclosed covered burners. It also states test methods to check those characteristics. This European Standard only covers type testing.
  • prEN 203-2-11 rev

    26-11-2010
    00106034

    Gas heated catering equipment - Part 2-11: Specific requirements - Pasta cookers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the test methods and requirements for the construction and operating characteristics relating to the safety, rational use of energy and marking of commercial gas heated pasta cookers.
  • prEN 203-2-2 rev

    26-11-2010
    00106033

    Gas heated catering equipment - Part 2-2: Specific requirements - Ovens

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the test methods and requirements for the construction and operating characteristics relating to the safety and rational use of energy, of commercial gas heated natural convection ovens, forced air ovens, multi-function ovens and steaming ovens, atmospheric or pressurised. Commercial bakery ovens, with a sole plate or a trolley and pizza ovens are also covered by this standard. This European Standard does not cover appliances which are specifically designed for use in industrial process on industrial premises.
  • prEN 203-2-4 rev

    12-03-2010
    00106028

    Gas heated catering equipment - Part 2-4: Specific requirements - Fryers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the test methods and requirements for the construction and operating characteristics relating to the safety, rational use of energy and marking, of commercial gas heated fryers. This European Standard only covers type testing.