Velkommen til portalen for nye arbejdsemner

3479 Hits

ISO/TC 69/SC 4/WG 11

  • prEN 352-9

    24-02-2006
    00159030

    Hearing protectors - Safety requirements and testing - Part 9: Earplugs with electrical audio input

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard is for hearing protector ear-plugs fitted with an audio input channel for safety-related incoming communications signals. It specifies additional contructional, design and performance requirements, methods of test, marking requirements and user information relating to the incorporation of the communication facility.
  • EN 353-1:2002+A1:2007

    04-05-2007
    00160063

    Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • prEN 353-2 rev

    31-10-2008
    00160064

    Personal protective equipment against falls from a height - Guided type fall arresters on a flexible anchorage line

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies the requirements, test methods, instructions for use and marking for guided type fall arresters on a flexible anchorage line secured to an upper anchorage point. Guided type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 360 and in EN 353-1. Energy absorbers are specified in EN 355.
  • prEN ISO 354 rev

    05-10-2018
    00126096

    Acoustics – Measurement of sound absorption in a reverberation room

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies a method of measuring the sound absorption coefficient of acoustical materials used as wall or ceiling treatments, or the equivalent sound absorption area of objects, such as furniture, persons, or space absorbers, in a reverberation room. It is not intended for measuring the absorption characteristics of weakly damped resonators. The results obtained can be used for comparison purposes and for design calculation with respect to room acoustics and noise control.
  • prEN 363 rev

    09-02-2016
    00160073

    Personal fall protection equipment - Personal fall protection systems

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the general characteristics and assembly of personal fall protection systems. It gives examples for the specific types of personal fall protection systems and describes how components may be assembled into systems.
  • prEN ISO 407 rev

    13-03-2018
    00023209

    Small medical gas cylinders -- Pin-index yoke-type valve connections

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 413-1 rev

    12-02-2015
    00051133

    Masonry cement - Part 1: Composition, specifications and conformity criteria

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the definition and composition of masonry cements as commonly used in Europe for the production of mortar for bricklaying and blocklaying and for rendering and plastering. It includes physical, mechanical and chemical requirements and defines strength classes. EN 413-1 also states the conformity criteria and the related rules. Necessary durability requirements are also given. NOTE – For normal applications the information given in EN 413-1, in EN 998-1 and in EN 998-2 is generally sufficient. However, in special cases, an exchange of additional information between the masonry cement producer and user can be helpful. The details of such an exchange are not within the scope of EN 413-1 but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned.
  • prEN 413-2 rev

    12-02-2015
    00051132

    Masonry cement - Part 2: Test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes reference and alternative test methods to be used when testing masonry cements to assess their conformity to EN 413-1. It gives the tests on fresh mortar for consistence, water retention and air content. In the event of a dispute, only the reference methods are used.
  • prEN 415-2 rev

    15-03-2017
    00146025

    Safety of packaging machines - Part 2: Pre-formed rigid container packaging machines

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies the safety requirements for the design and manufacture of pre-formed rigid container packaging machinery and the information that should be made available to the user of these machines
  • prEN 415-4 rev

    15-03-2017
    00146027

    Safety of packaging machines - Part 4: Palletisers and depalletisers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies the safety requirements for the design, manufacture and information for safe use of palletisers, depalletisers, and stackers/unstackers of empty pallets integrated or not into a (de)palletiser as defined in 3.1. In many respects palletisers and depalletisers present the same risks. In this text they are referred to together as (de)palletisers. For manipulating industrial robots used in (de)palletiser applications this standard and EN 775 apply. These safety requirements apply to automatic and semi-automatic (de)palletisers. They take into account the hazards which may occur during setting, commissioning and decommissioning, adjustment, use according to the information given by the manufacturer, maintenance (both preventive and repair) and cleaning. This standard does not cover the following hazards which can occur on (de)palletisers in certain circumstances: – Heat; – Noise; – Radiation; – Fumes, gas, dust; – Vibration; – Ergonomics (see EN 614-1:1995). Furthermore this standard does not cover hazards arising from contents of the load (e.g. toxic or flammable materials). Linked equipment, before and after the (de)palletiser, which is not an integral part of (de)palletising machinery, (for example pallet load securing) is not covered by this standard. This standard applies primarily to the machines which are manufactured after the date of issue of the standard (see EN 415-4:1997)
  • prEN 438-9 rev

    09-11-2015
    00249920

    High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies performance requirements for high-pressure decorative laminates (HPL) intended for interior use, the core compositions of which are not covered by EN 438-3 [1] to EN 438-6 [4] and EN 438-8 [5]. The core composition types (coloured core and metal reinforced core) are defined in this part of EN 438. EN 438-2 specifies the test methods relevant to this part of EN 438.
  • prEN 443 rev

    20-07-2012
    00158091

    Helmets for fire fighting in buildings and other structures

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European standard specifies minimum requirements for firefighters' helmets protecting the upper head mainly against the effects of impact, penetration and heat and flame, whilst firefighting in buildings and other structures.
  • prCEN/TR 455-5

    15-06-2015
    00205317

    Medical gloves for single use - Part 5: Guidance for selection of single use medical gloves

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Technical Report provides information for those choosing or using gloves for medical applications based on a risk assessment. It deals with gloves worn primarily for the protection of the patient and user from biological cross contamination.
  • prEN 459-2 rev

    23-04-2015
    00051136

    Building lime - Part 2: Test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes the test methods for all building limes covered by EN 459-1:2010. This European Standard specifies the methods used for the chemical analyses and the determination of physical properties of building limes. This document describes the reference methods and, in certain cases, an alternative method which can be considered to be equivalent. In the case of a dispute, only the reference methods are used. Any other methods may be used provided they are calibrated, either against the reference methods or against internationally accepted reference materials, in order to demonstrate their equivalence.
  • prEN 474-1 rev

    03-02-2015
    00151433

    Earth-moving machinery - Safety - Part 1: General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the general safety requirements for earth-moving machinery 1) described in EN ISO 6165:2012, except horizontal directional drill. NOTE 1 – Horizontal directional drills are covered by the EN 16228 series. This European standard also applies to derivative machinery (see 3.1.2) designed primarily for use with equipment to loosen, pick-up, move, transport, distribute and grade earth and rock. This European standard gives the common safety requirements for earth-moving machinery families and is intended to be used in conjunction with one of the EN 474 parts 2 to 12 13 These machine specific parts (EN 474-2 to – 13) do not repeat the requirements from EN 474-1:201x, but add or replace the requirements for the family in question. NOTE 3 – The requirements specified in this part of the standard are common to two or more families of earth- moving machinery. This part gives specific requirements for demolition machinery. Specific requirements in EN 474 parts 2 to 13 take precedence over the respective requirements of EN 474-1:201x. For multipurpose machinery the parts of the standard that cover the specific functions and applications have to be used e.g. a compact loader also used as a trencher shall use the relevant requirements of EN 474 parts 1, 3 and 10. The standard also covers general requirements for attachments intended to be used with earth moving machine families covered in the scope. Except for part 12 this European Standard does not deal with the electrical hazards related to the main circuits and drives of machinery when the principal source of energy is electrical. This European Standard does not deal with towing of trailers. This European Standard deals with all significant hazards, hazardous situations and events relevant to earth-moving machinery, when used as intended and under conditions foreseen but also taking taking into account nay reasonably foreseeable misuse thereof (see Clause 4). This European Standard specifies ...
  • prEN 474-10 rev

    04-02-2015
    00151437

    Earth-moving machinery - Safety - Part 10: Requirements for trenchers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to trenchers as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not deal with the specific hazards related to derivative use. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for trenchers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of trenchers. This European Standard is not applicable to trenchers manufactured before the date of publication of this European Standard by CEN.
  • EN 474-1:2006/prA5

    25-03-2015
    00151450

    Earth-moving machinery - Safety - Part 1: General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 474-11 rev

    04-02-2015
    00151443

    Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to earth and landfill compactors as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Other compactors such as roller compactors, rammer compactors and vibratory plates, which are dealt with in EN 500-1:2006 and EN 500-4:2006 are not covered in EN 474. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for earth and landfill compactors. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of earth and landfill compactors. This part does not deal with the specific hazards related to derivative use. This European Standard is not applicable to earth and landfill compactors manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-12 rev

    04-02-2015
    00151442

    Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to cable excavators as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard applies also to cable excavators, their undercarriage and upper-structure, if intended for use in combination with other equipment or attachment, such as drill rigs, pile driving and extracting equipment and moving equipment (e.g. rail track, walking legs, pontoon, ship) or stationary undercarriage. This European Standard is not dealing with the specific hazards due to these additional equipment or attachment. NOTE – For these additional equipment or attachment, relevant specific European Standards should be considered where available, for example: - for drilling- and foundation equipment, EN 16228 parts 1-7 The requirements of this part are complementarily to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for cable excavators. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of the machinery in the scope. This European Standard is not applicable to cable excavators manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-2 rev

    04-02-2015
    00151434

    Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler tractor-dozers as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with rear-mounted winches for use on tractor-dozers. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for tractor-dozers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of tractor-dozers. This European Standard is not applicable to tractor-dozers manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-3 rev

    04-02-2015
    00151438

    Earth-moving machinery - Safety - Part 3: Requirements for loaders

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to loaders as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with fork application, single heavy object handling application, object handling application and log handling. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for loaders. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of loaders. This European Standard is not applicable to loaders manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-4 rev

    04-02-2015
    00151436

    Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler backhoe loaders as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with fork application, object handling application and log handling. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006+A1:2009. This does not repeat the requirements from EN 474-1:2006+A1:2009, but adds or replaces the requirements for application for backhoe loaders. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of backhoe loaders. This European Standard is not applicable to machinery manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-5 rev

    04-02-2015
    00151444

    Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all specific significant hazards, hazardous situations and events relevant to hydraulic excavators as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with object handling application, shovel application and log application. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006+A3:2013. This part does not repeat the requirements from EN 474-1:2006+A3:2013, but adds or replaces the requirements for application for hydraulic excavators. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of hydraulic excavators. This European Standard is not applicable to hydraulic excavators manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-6 rev

    04-02-2015
    00151435

    Earth-moving machinery - Safety - Part 6: Requirements for dumpers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler dumpers as defined in EN ISO 6165:2006, including compact dumpers, and compact dumpers with standing operator when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The requirements of this part are complementary to common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for dumpers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of dumpers. Pedestrian controlled dumpers are excluded from the scope of this European Standard. This European Standard is not applicable to dumpers, manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-7 rev

    04-02-2015
    00151439

    Earth-moving machinery - Safety - Part 7: Requirements for scrapers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler scrapers except towed scrapers as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for scrapers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of scrapers. This European Standard is not applicable to scrapers manufactured before the date of publication of this European Standard by CEN.