Velkommen til portalen for nye arbejdsemner

3469 Hits

CEN/TC 292

  • prEN 1009-2

    02-12-2011
    00151410

    Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This part of EN 1009 to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of feeding machinery for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1 for machines that have been designed and built according to the provisions of this part of EN 1009. This part of EN 1009, together with EN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to feeding machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE 1 – EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery. NOTE 2 – Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard. This part of EN 1009 is not applicable to feeding machinery which are manufactured before the date of publication of this document by CEN
  • prEN 1009-3

    02-12-2011
    00151411

    Machines for mechanical processing of minerals and similar solid materials - Safety - Part 3: Specific requirements for crushing and milling machinery

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This part of EN 1009 to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of crushing and milling machinery for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1 for machines that have been designed and built according to the provisions of this part of EN 1009. This part of EN 1009, together with EN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to crushing and milling machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE 1 – EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery. NOTE 2 – Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard. This part of EN 1009 is not applicable to crushing and milling machinery which are manufactured before the date of publication of this document by CEN.
  • prEN 1009-4

    02-12-2011
    00151406

    Machines for mechanical processing of minerals and similar solid materials - Safety - Part 4: Specific requirements for screening machinery

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This part of EN 1009, to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of screening machinery for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1 for machines that have been designed and built according to the provisions of this part of EN 1009. This part of EN 1009, together with EN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to screening machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting hazards arising from: NOTE 1 – EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery. NOTE 2 – Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard.This document is not applicable to screening machinery which are manufactured before the date of publication of this document by CEN.
  • prEN 1009-5

    02-12-2011
    00151407

    Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This part of EN 1009 to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of machinery for cleaning, recycling, sorting (other than screens) and mud treatment for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1 for machines that have been designed and built according to the provisions of this part of EN 1009. This part of EN 1009, together with EN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to machinery for cleaning, recycling, mud treatment when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE 1 – EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery. NOTE 2 – Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard. This part of EN 1009 is not applicable to machinery for cleaning, recycling, mud treatment which are manufactured before the date of publication of this document by CEN.
  • prEN 1011-3 rev

    27-01-2016
    00121745

    Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard gives general recommendations for the fusion welding of stainless steels. Specific details relevant to austenitic, austenitic-ferritic, ferritic and martensitic stainless are given in annexes A to D.
  • prEN 1011-4 rev

    27-01-2016
    00121747

    Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard gives general recommendations for the manual, mechanized and automatic fusion welding of wrought and cast aluminium alloys and combinations therefo. For general guidelines, see EN 1011-1. In this Standard the word "pipe" alone or in combinations is used to mean "tube" or "hollow section", although these terms are often used for different categories of product by different industries.
  • prEN 1011-6 rev

    27-01-2016
    00121746

    Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard gives general guidance for laser beam welding and associated processes of metallic materials in all forms of product (e.g. cast, wrought, extruded, forged). NOTE – Some guidance on laser beam cutting, drilling, surface treatment and cladding is given in Annex F.
  • prEN 1011-8 rev

    17-12-2014
    00190083

    Welding — Recommendations for welding of metallic materials — Part 8: Welding of cast irons

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the requirements for fusion welding of unalloyed and low-alloy cast iron castings produced in accordance with: - EN 1561, Founding — Grey cast irons; - EN 1562, Founding — Malleable cast irons; - EN 1563, Founding — Spheroidal graphite cast irons. This document does not apply to the joint welding of cast iron castings to other materials.
  • prEN 1064 rev

    26-09-2014
    00251304

    Health informatics – Standard communication protocol – Computer-assisted electrocardiography

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the common conventions required for the cart-to-host as well as cart-to-cart interchange of specific patient data (demographic, recording, ...), ECG signal data, ECG measurement and ECG interpretation results. This document specifies the content and structure of the information which is to be interchanged between digital ECG carts and computer ECG management systems, as well as other computer systems where ECG data can be stored.
  • prEN 1073-2 rev

    13-10-2006
    00162256

    Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the requirements and test methods for non-ventilated protective clothing protecting the wearer against particulate radioactive contamination.
  • prEN 1073-3

    07-11-2008
    00162302

    Protective clothing against radioactive contamination - Part 3: Requirements and test methods for ventilated protective clothing in connection with powered filtering devices against particulate radioactive contamination

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the requirements and test methods for ventilated protective clothing in connection with powered filtering devices protecting the wearer against particulate radioactive contamination. This European Standard does not apply for the protection against ionizing radiation and the protection of patients against contamination with radioactive substances by diagnostical and/or therapeutical measures.
  • prEN 1081 rev

    22-12-2015
    00134243

    Resilient floor coverings - Determination of the electrical resistance

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This European Standard specifies the determination for the vertical resistance of a floor covering, one determination for the surface resistance of a floor covering and one determination for the resistance to earth of a floor covering after installation.
  • prEN 1090-1 rev

    11-12-2014
    00135022

    EN 1090 Execution of Steel structures and aluminium structures - Part 1: Assessment and Verification of Constancy of Performance for structural components

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements for assessment and verification of constancy of performance for structural steel components and structural aluminium components as well as for kits, placed on the market as construction products. The assessment and verification of constancy of performance covers the manufacturing characteristics, and where appropriate the structural design characteristics.
  • FprEN 1096-4 rev

    22-01-2016
    00129223

    Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document covers the evaluation of conformity and the factory production control of coated glass for use in buildings. Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
  • prEN 1102 rev

    13-02-2015
    00248596

    Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a procedure to determine the flame spread of textiles for curtains and drapes by testing a vertically oriented specimen in accordance with EN ISO 6941.
  • prEN 1104 rev

    24-02-2016
    00172176

    Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This European Standard specifies a method for the determination of transfer of antimicrobial constituents from paper and board materials and articles intended for food contact.
  • prEN 1107-1 rev

    24-07-2009
    00254107

    Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • prEN 1143-1 rev

    08-10-2010
    00263030

    Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    To include requirements for: Testing criteria for gas attacks on ATM safes Flexible base )plinth) for ATM safes
  • prEN 1143-1 rev

    02-11-2015
    00263038

    Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This European Standard establishes the basis for testing and classifying free-standing safes, built-in safes (floor and wall), ATM safes and ATM bases, strongroom doors and strongrooms (with or without a door) according to their burglary resistance. This European Standard does not cover testing and classifying Deposit Systems and ATM systems.
  • prEN 1168 rev

    04-05-2012
    00229132

    Precast concrete products - Hollow core slabs

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard deals with the requirements and the basic performance criteria and specifies minimum values where appropriate for precast hollow core slabs made of prestressed or reinforced normal weight concrete according to EN 1992-1-1:2004. This European Standard covers terminology, performance criteria, tolerances, relevant physical properties, special test methods, and special aspects of transport and erection. Hollow core elements are used in floors, roofs, walls and similar applications. In this European Standard the material properties and other requirements for floors and roofs are dealt with; for special use in walls and other applications, see the relevant product standards for possible additional requirements. The elements have lateral edges with a grooved profile in order to make a shear key to transfer shear through joints contiguous elements. For diaphragm action the joints have to function as horizontal shear joints. To improve this action vertical grooves may be provided. The elements are manufactured in factories by extrusion, slipforming or mouldcasting. Fitting slabs (narrowed slab elements) and recesses to the hollow core slabs can be made during production or afterwards. Hollow core slabs can have provisions for thermal activation, heating, cooling, sound insulation, etc. Due to these provisions, the concrete temperature remains in it"s natural range. This European Standard also deals with solid slab elements used in conjunction with hollow core slabs and manufactured by extrusion, slipforming or mouldcasting, equivalent to the manufacturing of hollow core slabs. These solid slabs have the same overall cross-section as hollow core slabs, however without hollow cores. The application of the standard is limited for prestressed elements to a maximum depth of 500 mm and for reinforced elements to a maximum depth of 300 mm. For both types, the maximum width without transverse reinforcement is limited to 1 200 mm and with transverse rein ...
  • prEN 1175-1 rev

    12-10-2015
    00150092

    Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    1.1 This standard specifies electrical and related mechanical safety requirements for design and construction of the electrical installation in battery powered industrial trucks hereinafter referred to as trucks, with nominal voltages of the truck system up to 240 V. The Annex A is normative and gives requirements for "Connectors for traction batteries". Annex B is normative and contains "Electric motors – Output and test rules" and Annex C is normative and contains "Electromagnetic contactors". NOTE 1 – Reference is made to this standard in other standards which cover the non-electrical requirements of the various industrial truck types. NOTE 2 – This standard does not address the subject of charging of traction batteries (CENELEC TC 21X is preparing safety standards for battery charging). NOTE 3 – The special requirements for operation in potentially explosive atmospheres are not covered in this European Standard. 1.2 The requirements of this standard are applicable, when trucks are operated under the following climatic conditions: - Average ambient temperature for continuous duty: +25°C; - Maximum ambient temperature, short term (up to 1 h): +40°C; - Lowest ambient temperature for trucks intended for use in normal indoor conditions: +5 °C; - Lowest ambient temperature for trucks intended for use in normal outdoor conditions: -20 °C; - Altitude: up to 2000 m; - Relative humidity: in the range 30 % to 95 % (non condensing). 1.3 This standard covers specific hazards (listed in clause 4), which could occur during the intended use of trucks. For hazards occurring during construction, transportation, commissioning, decommissioning and disposal, reference should be made to EN ISO 12100-2:2003.
  • prEN 1175-2 rev

    12-10-2015
    00150093

    Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    1.1 This standard specifies the electrical and related mechanical safety requirements for the design and construction of the electrical installation in internal combustion engine powered trucks (hereinafter referred to as "trucks") with starter battery nominal voltages up to and including 24 V. NOTE 1 – Part 3 of this standard details specific electrical requirements for electrical power transmission systems of internal combustion engine powered trucks. NOTE 2 – Reference is made to this standard in other standards which cover the non-electrical requirements of the various industrial truck types. NOTE 3 – The special requirements for operation in potentially explosive atmospheres are not covered in this European Standard. 1.2 The requirements of this standard are applicable, when trucks are operated under the following climatic conditions: - Maximum ambient temperature, continuous duty: +40 °C; - Lowest ambient temperature: -20 °C; - Service altitude: up to 2000 m; - Relative humidity: in the range 30 % to 95 % (non condensing). 1.3 This standard covers specific hazards which could occur during the intended use of trucks. For hazards occurring during construction, transportation, commissioning, decommissioning and disposal, reference should be made to EN ISO 12100-2:2003.
  • prEN 1175-3 rev

    12-10-2015
    00150094

    Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    1.1 This standard specifies the safety requirements for the design and construction of electrical power transmission systems of trucks with internal combustion engines driving one or more generators with outputs up to and including 600 V supplying power to function motors. The Annex A is normative and contains "Generators – Output and test rules". NOTE 1 – Reference is made to this standard in other standards which cover the non-electrical requirements of the various industrial truck types. NOTE 2 – The special requirements for operation in potentially explosive atmospheres are not covered in this European Standard. 1.2 The requirements of this standard are applicable, when trucks are operated under the following climatic conditions: - Maximum ambient temperature, continuous duty: +40 °C; - Lowest ambient temperature: -20 °C; - Service altitude: up to 2000 m; - Relative humidity: in the range 30 % to 95 % (non condensing). 1.3 This standard covers specific hazards which could occur during the intended use of trucks. For hazards occurring during construction, transportation, commissioning, decommissioning and disposal, reference should be made to EN ISO 12100-2:2003.
  • prEN 1176-10 rev

    05-08-2015
    00136360

    Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment

    Oprindelse:
    CEN
    International kategori
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document is applicable to fully enclosed play equipment intended for installation inside and outside buildings, for children up to 14 years old, see 3.1. The purpose of this document is to provide additional safety requirements covering particulars of these structures, such as exits and escape routes, visibility, external "climbability", containment walls/netting in relation to safety area, ignition resistance, specific equipments/components, impact-attenuating surfaces, signage, specific inspection and maintenance
  • prEN 1177 rev

    08-12-2015
    00136361

    Impact attenuating playground surfacing - Determination of critical fall height

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a method for determining the impact attenuation of playground surfacing. It defines a “Critical Fall Height" (see 3.2) for surfacing, which represents the upper limit of its effectiveness in reducing head injury when using playground equipment conforming to EN 1176. The test methods described in the European Standard are applicable for tests carried out in a laboratory and for tests on site.