Velkommen til portalen for nye arbejdsemner

3474 Hits

ISO/TC 69/SC 4/WG 11

  • prEN 932-5 rev

    29-01-2015
    00154169

    Tests for general properties of aggregates - Part 5: Common equipment and calibration

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies general requirements for common equipment, calibration and checking procedures and reagents for the testing of the properties of aggregates. In the case of checking, other procedures than the ones described in this standard may be used provided that appropriate working relationships with the corresponding methods described in this standard have been established. In case of dispute, the checking methods described in this standard shall be used.
  • prEN 933-xx

    21-12-2012
    00154154

    Tests for geometrical properties of aggregates - Part xx: Testing method to increase accuracy evaluation of the percentage of crushed surfaces of aggregates

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This part of EN 933 will be a testing method to increase accuracy evaluation of the percentage of crushed surfaces of aggregates
  • prEN 933-9 rev

    21-12-2012
    00154155

    Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard describes the reference method used for type testing and in cases of dispute for the determination of the methylene blue value of the 0/2 mm fraction in fine aggregates or all-in aggregates (MB). It also describes the reference method for the determination of the methylene blue value of the 0/0,125 mm fraction (MBF) in Annex A. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the suitable reference method has been established.
  • prEN 934-2 rev

    04-03-2019
    00104431

    Admixtures for concrete, mortar and grout – Part 2: Concrete admixtures – Definitions, requirements, conformity, marking and labelling

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies definitions and requirements for admixtures for use in concrete. It covers admixtures for plain, reinforced and prestressed concrete which are used in site mixed, ready mixed concrete and precast concrete. The performance requirements in this standard apply to admixtures used in concrete of normal consistence. They may not be applicable to admixtures intended for other types of concrete such as semi-dry and earth moist mixes. Provisions governing the practical application of admixtures in the production of concrete, i.e. requirements concerning composition, mixing, placing, curing etc. of concrete containing admixtures are not part of this standard.
  • prEN ISO 945-1 rev

    16-05-2014
    00190082

    Microstructure of cast irons - Part 1: Graphite classification by visual analysis

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 959 rev

    21-05-2015
    00136322

    Mountaineering equipment - Rock anchors - Safety requirements and test methods

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies safety requirements and test methods for rock anchors for use in mountaineering including climbing.
  • prEN 1009-1

    02-12-2011
    00151412

    Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for single machines and processing plants

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    1.1 This standard applies to mechanical processing machines used in various fields of application, e. g.: – cement, lime and gypsum; – quarrying; – sand and gravel; – industrial minerals; – metalliferous mining (ore preparation); – coal preparation; – building demolition waste; – recycling of mineral waste; – slag handling; – brick manufacture; – ceramics industry; – aggregates; – other solid materials other than agro-business. It deals with the following types of individual machines for the mechanical processing of minerals and similar solid materials: – feeding machinery as per part 2; – crushing machinery as per part 3; – milling machinery as per part 3; – sizing and sorting machinery as per part 4; – machinery for cleaning, recycling, mud treatment as per part 5. This part gives the common safety requirements for machines for the mechanical processing of minerals and similar solid materials families and is intended to be used in conjunction with one of the EN 1009 parts 2 to 5. These machine specific parts (EN 1009-2 to -5) do not repeat the requirements from EN 1009-1:20__, but add or replace the requirements for the family in question. NOTE The requirements specified in this part of the standard are common to two or more families of machines for the mechanical processing of minerals and similar solid materials. Specific requirements in EN 1009 parts 2 to 5 take precedence over the respective requirements of EN 1009-1:20__. The standard covers assemblies of two or more of the mentioned machines which interact as an integrated whole. The machines included in the scope of this standard may be stationary, semi-mobile or mobile. The standard covers transportation, erection, commissioning, use and maintenance of plants and combined machines. This standard deals with significant hazards, common to the types of machines listed in this scope when they are used as intended and under conditions for misuse which are reasonably foreseeable by the manufacturer (see Clau ...
  • prEN 1009-2

    02-12-2011
    00151410

    Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This part of EN 1009 to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of feeding machinery for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1 for machines that have been designed and built according to the provisions of this part of EN 1009. This part of EN 1009, together with EN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to feeding machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE 1 – EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery. NOTE 2 – Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard. This part of EN 1009 is not applicable to feeding machinery which are manufactured before the date of publication of this document by CEN
  • prEN 1009-3

    02-12-2011
    00151411

    Machines for mechanical processing of minerals and similar solid materials - Safety - Part 3: Specific requirements for crushing and milling machinery

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This part of EN 1009 to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of crushing and milling machinery for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1 for machines that have been designed and built according to the provisions of this part of EN 1009. This part of EN 1009, together with EN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to crushing and milling machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE 1 – EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery. NOTE 2 – Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard. This part of EN 1009 is not applicable to crushing and milling machinery which are manufactured before the date of publication of this document by CEN.
  • prEN 1009-4

    02-12-2011
    00151406

    Machines for mechanical processing of minerals and similar solid materials - Safety - Part 4: Specific requirements for screening machinery

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This part of EN 1009, to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of screening machinery for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1 for machines that have been designed and built according to the provisions of this part of EN 1009. This part of EN 1009, together with EN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to screening machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting hazards arising from: NOTE 1 – EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery. NOTE 2 – Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard.This document is not applicable to screening machinery which are manufactured before the date of publication of this document by CEN.
  • prEN 1009-5

    02-12-2011
    00151407

    Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This part of EN 1009 to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of machinery for cleaning, recycling, sorting (other than screens) and mud treatment for the mechanical processing of minerals and similar solid materials. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1 for machines that have been designed and built according to the provisions of this part of EN 1009. This part of EN 1009, together with EN 1009-1, deals with all the significant hazards, hazardous situations and events relevant to machinery for cleaning, recycling, mud treatment when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE 1 – EN 13309 specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kind of mobile construction machinery. NOTE 2 – Specific requirements related to road traffic regulations (e.g. lighting, dimensions, speed limit plate) are not taken into account in this standard. This part of EN 1009 is not applicable to machinery for cleaning, recycling, mud treatment which are manufactured before the date of publication of this document by CEN.
  • prEN 1011-3 rev

    27-01-2016
    00121745

    Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard gives general recommendations for the fusion welding of stainless steels. Specific details relevant to austenitic, austenitic-ferritic, ferritic and martensitic stainless are given in annexes A to D.
  • prEN 1011-4 rev

    27-01-2016
    00121747

    Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard gives general recommendations for the manual, mechanized and automatic fusion welding of wrought and cast aluminium alloys and combinations therefo. For general guidelines, see EN 1011-1. In this Standard the word "pipe" alone or in combinations is used to mean "tube" or "hollow section", although these terms are often used for different categories of product by different industries.
  • prEN 1011-6 rev

    27-01-2016
    00121746

    Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard gives general guidance for laser beam welding and associated processes of metallic materials in all forms of product (e.g. cast, wrought, extruded, forged). NOTE – Some guidance on laser beam cutting, drilling, surface treatment and cladding is given in Annex F.
  • prEN 1011-8 rev

    17-12-2014
    00190083

    Welding — Recommendations for welding of metallic materials — Part 8: Welding of cast irons

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the requirements for fusion welding of unalloyed and low-alloy cast iron castings produced in accordance with: - EN 1561, Founding — Grey cast irons; - EN 1562, Founding — Malleable cast irons; - EN 1563, Founding — Spheroidal graphite cast irons. This document does not apply to the joint welding of cast iron castings to other materials.
  • prEN 1064 rev

    26-09-2014
    00251304

    Health informatics – Standard communication protocol – Computer-assisted electrocardiography

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the common conventions required for the cart-to-host as well as cart-to-cart interchange of specific patient data (demographic, recording, ...), ECG signal data, ECG measurement and ECG interpretation results. This document specifies the content and structure of the information which is to be interchanged between digital ECG carts and computer ECG management systems, as well as other computer systems where ECG data can be stored.
  • prEN 1073-2 rev

    13-10-2006
    00162256

    Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the requirements and test methods for non-ventilated protective clothing protecting the wearer against particulate radioactive contamination.
  • prEN 1073-3

    07-11-2008
    00162302

    Protective clothing against radioactive contamination - Part 3: Requirements and test methods for ventilated protective clothing in connection with powered filtering devices against particulate radioactive contamination

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the requirements and test methods for ventilated protective clothing in connection with powered filtering devices protecting the wearer against particulate radioactive contamination. This European Standard does not apply for the protection against ionizing radiation and the protection of patients against contamination with radioactive substances by diagnostical and/or therapeutical measures.
  • prEN 1081 rev

    22-12-2015
    00134243

    Resilient floor coverings - Determination of the electrical resistance

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This European Standard specifies the determination for the vertical resistance of a floor covering, one determination for the surface resistance of a floor covering and one determination for the resistance to earth of a floor covering after installation.
  • prEN 1090-1 rev

    11-12-2014
    00135022

    EN 1090 Execution of Steel structures and aluminium structures - Part 1: Assessment and Verification of Constancy of Performance for structural components

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements for assessment and verification of constancy of performance for structural steel components and structural aluminium components as well as for kits, placed on the market as construction products. The assessment and verification of constancy of performance covers the manufacturing characteristics, and where appropriate the structural design characteristics.
  • FprEN 1096-4 rev

    22-01-2016
    00129223

    Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document covers the evaluation of conformity and the factory production control of coated glass for use in buildings. Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
  • prEN 1102 rev

    13-02-2015
    00248596

    Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a procedure to determine the flame spread of textiles for curtains and drapes by testing a vertically oriented specimen in accordance with EN ISO 6941.
  • prEN 1104 rev

    24-02-2016
    00172176

    Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This European Standard specifies a method for the determination of transfer of antimicrobial constituents from paper and board materials and articles intended for food contact.
  • prEN 1107-1 rev

    24-07-2009
    00254107

    Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • prEN 1143-1 rev

    08-10-2010
    00263030

    Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    To include requirements for: Testing criteria for gas attacks on ATM safes Flexible base )plinth) for ATM safes