Velkommen til portalen for nye arbejdsemner

3469 Hits

CEN/TC 292

  • prEN 12580 rev

    29-07-2011
    00223094

    No title available

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European standard specifies methods for sampling growing media and soil improvers (exluding liming materials) for subsequent determination of quality and quantity. It oulines the principles to be taken into consideration when taking the sample and ensuring and adequate quantity is available for testing. This standard applies only to material that is in solid form.
  • prEN 12608-2

    22-04-2011
    00033436

    Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 2: Laminated profiles

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the classifications, requirements and test methods for laminated unplasticized polyvinylchloride (PVC-U) profiles intended to be used for the fabrication of windows and doors.
  • prEN 12609

    02-12-2011
    00151408

    Truck mixers - Safety requirements

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The Standard is to specify the safety requirements applicable to truck mixers. A truck mixer as defined by this standard is used for the transportation and mixing of concrete, mortars and mineral building materials. The safety requirements will cover the superstructure (mixer equipment) and its interface with the truck chassis but not cover the truck itself and the elements required for the basic transport function of the truck. Other machinery that can be combined with the truck mixer, such as concrete pumps, distributor masts and conveyor belts will not be covered by the document.
  • prEN 12621 rev

    17-02-2012
    00271054

    Machinery for the supply and circulation of coating materials under pressure - Safety requirements

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Design and construction of machinery for the supply of liquid coating material according to the fundamental requirements of the Directives: Machinery, ATEX and Pressure Equipment Directive
  • prEN 12627 rev

    03-07-2014
    00069181

    Industrial valves - Butt welding ends for steel valves

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    To take into account the comments received during 2014 systematic review and also the decision approved by WG 1
  • prEN 12628 rev

    21-05-2015
    00136383

    Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, test methods

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies functional and safety requirements and test methods applicable to combined buoyancy and rescue devices. This standard is applicable to combined buoyancy and rescue devices for use by divers as defined in 3.1. This standard does not apply to buoyancy compensators, which are dealt with in EN 1809.
  • prEN ISO 12631 rev

    24-04-2014
    00089169

    Thermal performance of curtain walling - Calculation of thermal transmittance

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    Revision of EN ISO 12631:2012 This International Standard specifies a method for calculating the thermal transmittance of curtain walls consisting of glazed and/or opaque panels fitted in, or connected to, frames. The calculation includes: - different types of glazing, e.g. glass or plastic; single or multiple glazing; with or without low emissivity coating; with cavities filled with air or other gases; - frames (of any material) with or without thermal breaks; - different types of opaque panels clad with metal, glass, ceramics or any other material. Thermal bridge effects at the rebate or connection between the glazed area, the frame area and the panel area are included in the calculation. The calculation does not include: - effects of solar radiation; - heat transfer caused by air leakage; - calculation of condensation; - effect of shutters; - additional heat transfer at the corners and edges of the curtain walling; - connections to the main building structure nor through fixing lugs; - curtain wall systems with integrated heating. No change to the scope is expected. There will editorial revision (new structure) in the context of Mandate M/480
  • prEN 12640 rev

    11-10-2017
    00119046

    Securing of cargo on road vehicles – Lashing points on commercial vehicles for goods transportation – Minimum requirements and testing

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This Standard specifies the minimum requirements and test methods for lashing points fitted to commercial vehicles and trailers with flatbed body construction of maximum total mass above 3,5 t and intended for general use. The standard does not apply to – Vehicles designed and constructed exclusively for the transportation of bulk materials; – Vehicles designed and constructed exclusively for the transportation of specific cargo with particular securing requirements.
  • prEN 12641-2 rev

    08-07-2016
    00119043

    Swap bodies – Tarpaulins – Part 2: Minimum requirements for combined transport

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies minimum requirements for the strength and attachment of tarpaulins used on swap bodies for combined transport. NOTE – Requirements for securing of cargo are given in EN 12640 and EN 12642, option XL.
  • prEN 12641-2 rev

    13-07-2016
    00119045

    Swap bodies – Tarpaulins – Part 3: Minimum requirements for road transport

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies general requirements and minimum requirements for the strength and attachment of curtainsider tarpaulins with load-securing properties used on swap bodies and road vehicles for road transport. These curtainsider tarpaulins are used as an aid for securing loads and can take on load-securing functions when combined with a vehicle body in accordance with EN 12642 Code XL or EN283.
  • prEN 12654-1 rev

    10-11-2015
    00249906

    Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies the dimensions, the method of sampling, the preparation of the test specimens, and also the conditions for performing the peel test perpendicular to the weld in order to determine the peel resistance and the failure behaviour. A peel test may be used in conjunction with other tests (e.g. tensile creep, macro...) to assess the performance of welded assemblies, made from thermoplastics materials. Peel tests are applicable to overlap welded assemblies made from thermoplastics materials, irrespective of the welding process used.
  • prEN 12665 rev

    20-07-2012
    00169062

    Light and lighting - Basic terms and criteria for specifying lighting requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard defines basic terms and definitions for use in all lighting applications. This European Standard also sets out a framework for the specification of lighting requirements, giving details of aspects which have to be considered when setting those requirements.
  • prEN 12665 rev

    02-06-2015
    00169070

    Light and lighting - Basic terms and criteria for specifying lighting requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard defines basic terms and definitions for use in all lighting applications. This European Standard also sets out a framework for the specification of lighting requirements, giving details of aspects which have to be considered when setting those requirements.
  • prEN 12670 rev

    31-07-2015
    00246116

    Natural stone - Terminology

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard defines the recommended terminology covering scientific, and technical terms, test methods, products, and the classification of Natural Stones.
  • prEN 12691 rev

    26-06-2014
    00254158

    Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Determination of resistance to impact

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a test for puncture by impact on sheets for roof waterproofing. Mechanical stress on waterproofing sheets ranges from static long-term loads to dynamic short-term loads. This method represents the dynamic category of load where puncture may be caused by impact. This European Standard may also be applied for other purposes of waterproofing.
  • prEN ISO 12696

    30-01-2009
    00219048

    Cathodic protection of steel in concrete

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
  • prEN 12697-48

    29-06-2015
    00227435

    Bituminous mixtures - Test methods for hot mix asphalt - Part 48: Interlayer Bonding

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies test methods for determining the bond strength between an asphalt layer and other construction layers in road or airfield pavement. The tests can also be applied on laboratory prepared interlayers. Further informative test methods are defined for evaluating the complex bond stiffness between road construction layers. The normative tests described in this standard are Torque bond test (TBT), Shear bond test (SBT) and Tensile Adhesion Test (TAT). Further two test methods for evaluating the complex bond stiffness are described in informative annexes: Compressed shear bond test (CSBT) and Cyclic compressed shear bond test (CCSBT). NOTE – The described test methods simulate different loading conditions and are applicable on different bonds between road construction layers: The torque bond test assesses the resistance to horizontal shear stress: The torque bond test is suitable for testing the bond strength between road layers in laboratory and in situ. The torque bond test assesses the resistance to the stresses generated primarily by traffic accelerating or braking, but also by thermal movements when the layers are of different materials (e.g. asphalt, microsurfacing or cement concrete) The torque bond test can be carried out immediately after laying. The torque bond test can be applied for assess the capability of bond coats or tack coats. When the thickness of the top layer above the interlayer assessed is less than 15 mm, the torque bond test can be applied for evaluating the durability of the top layer. The shear bond test assesses the resistance to horizontal shear stresses in the interlayer of two road construction layers. The shear bond test assesses the resistance to the stresses generated primarily by traffic accelerating or braking, but also by thermal movements when the layers are of different materials (e.g. asphalt, microsurfacing or cement concrete). The shear bond test can be applied for assess the capability of bond coats or tack coats. The shear bond test is suitable to evaluate the shear bond strength of construction layers with a thickness  20 mm. The tensile adhesion test assesses the tensile bond strength between two road construction layers. The test method is applicable on thin surface layers. The compressed shear bond test assesses shear behaviour of interlayers subjected to both horizontal and vertical traffic loads. The cyclic compressed shear bond tests assesses the interlayer bond stiffness at various temperatures, loading frequencies and normal stress levels.
  • prEN 12733 rev

    20-05-2015
    00144340

    Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies safety requirements and their verification for design and construction of pedestrian controlled motor mowers with rotary or reciprocating cutting blades used in agricultural, forestry and landscaping to cut and/or mulch grass or similar plants or scrub and woody vegetation. For the purposes of this standard the following types of pedestrian controlled machines are considered to be motor mowers: - flail mowers; - grassland mowers; - scrub clearing machines; - sickle bar mowers. This standard applies also to multipurpose machines when are used for cutting or mulching grass or scrub. This standard does not cover lawn mowers (see EN 836), engine driven brush cutters and grass trimmers (see EN ISO 11806) or other lawn maintenance equipment. This standard describes methods for the elimination or reduction of hazards arising from the use of motor mowers. Additionally, it specifies the type of information to be provided by the manufacturer on safe working practices. Environmental aspects have not been considered in this standard. This standard applies primarily to machines which are manufactured after the date of issue of the standard.
  • prEN 12753 rev

    17-02-2012
    00271055

    Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Design and construction of thermal cleaning systems for exhaust gas according to the requirement of the Machinery Directive 2006/42/EC
  • prEN 12807 rev

    02-06-2015
    00286173

    LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable brazed steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 15 l, exposed to ambient temperatures. This European Standard applies only to cylinders having a circular cross-section without any longitudinal joint.
  • prEN 12830 rev

    25-02-2015
    00423002

    Temperature recorders for the transport, storage and distribution of temperature sensitive goods including food and pharmaceuticals – Tests, performance, suitability and marking

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Komite
    Beskrivelse
    This European Standard specifies the technical and functional characteristics of temperature recorders for the transport, storage and distribution of temperature sensitive goods between – 80°C and +85°C. It specifies the test methods which allow the determination of the equipment's conformity, suitability and performance requirements. It applies to the whole temperature recording system. The temperature sensor(s) may be integrated into the recorder or be remote from it [external sensor(s)]. It gives some requirements with regards to the location of sensors of the recorder with respect to types of usage such as transport, storage and distribution. NOTE – Examples for the transport, storage and distribution of temperature sensitive goods between – 80°C and +85°C are chilled, frozen and deep frozen, quick frozen food, ice cream, fresh and hot food, pharmaceuticals, blood, organs, chemicals, biologicals, electronic and mechanical devices, flowers, plants, bulbs, raw materials and liquids, animals, art and furnishing.
  • prEN 12841 rev

    05-10-2012
    00160068

    Personal fall protection equipment - Rope access systems - Rope adjustment devices

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard applies to rope adjustment devices intended for use in rope access systems. It specifies the requirements, test methods, marking and information supplied by the manufacturer. Rope adjustment devices conforming to this European Standard may be designed for the use of one person, or in case of rescue, for two persons simultaneously. The rope adjustment devices as specified are not suitable for use in a fall arrest system.
  • prEN 12852 rev

    11-05-2007
    00153069

    Food processing machinery - Food Processors and Blenders - Safety and hygiene requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European standard specifies the safety and hygiene requirements for the design and manufacture of food processors and blenders. It applies to food processors and blenders having a bowl which is stationary while the food is being processed. The total volume of the bowl is less than or equal to 150 l. The machines covered by this standard are intended to carry out various types of operations such as : mincing, mixing, blending, whipping, using a large number of products and raw materials, and which are used in food and catering industries such as restaurants, hotels, coffee shops and pubs. This standard applies when such machines are used under the intended conditions of use as defined in 3.12 of EN 292-1:1991 and stated in the instruction handbook (see 7.1), including cleaning, removal of food blockages, feeding and changing the tools. This standard does not apply to : domestic machines; machinery dedicated to food industrial processing (e.g. pet food, cannery industry, industrial meat processing). Small machines called ""shakers"" which are dedicated to blending liquid, with an impellor, usually driven from above are excluded.
  • prEN 12853 rev

    11-05-2007
    00153071

    Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • prEN ISO 12855 rev

    28-02-2019
    00278527

    Electronic fee collection – Information exchange between service provision and toll charging

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget