Velkommen til portalen for nye arbejdsemner

47 Hits

DS/S-008-Brandslukningsmateriel


Næste >
  • No reference

    01-10-2010
    00191234

    No title available

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with semi-rigid hose of diameter 19 mm, 25 mm or 33 mm for installation in buildings and other construction works, permanently connected to a water supply, for use by the occupants. Furthermore, it provides also for requirements on evaluation of conformity and marking of these products. Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements may be necessary in such cases. This standard is applicable to both manual and automatic fire hose reels for installation with and without cabinets.
  • No reference

    01-10-2010
    00191235

    No title available

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements and methods of test for the construction and performance of fire hose systems with lay-flat hose for installation in buildings and other construction works, permanently connected to a water supply, for use by the occupants. Furthermore, it provides also for requirements on evaluation of conformity and marking of these products. Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements may be necessary in such cases.
  • No reference

    02-11-2007
    00070033

    Portable fire extinguishers - Maintenance

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This document specifies the general principles for checks by the user of portable fire extinguishers and maintenance of portable extinguishers, to be carried out by a competent person.
  • No reference

    09-11-2012
    00191266

    Early suppression fast response (ESFR) sprinkler heads.

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies requirements for construction, performance and test method for early suppression fast response (ESFR) sprinkler heads. This standard is intended to cover the ESFR sprinklers having a K factor equal or above 200, used for storage application as defined in EN 12845.
  • prEN 3-9 rev

    01-04-2011
    00070038

    Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies the rules of design, assembling, inspection and testing of CO2 portable fire extinguishers as far as the pressure risk is concerned.
  • prEN 54-10 rev

    18-12-2015
    00072121

    Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements, test methods and performance criteria for point-type, flame detectors that detect the radiation from the flames generated during the combustion of carbon based materials for use in fire detection systems installed in and around buildings. Flame detectors having special characteristics suitable for the detection of specific fire risks are not covered by this standard e.g. flame detectors that are used solely to detect metal fires or hydrogen fires (although the standard may be used as guidance in assessing such products). The performance requirements for any additional functions are beyond the scope of this standard (e.g. additional features or enhanced functionality for which this standard does not define a test or assessment method).
  • prEN 54-17 rev

    15-06-2012
    00072099

    Fire detection and fire alarm systems - Part 17: Short-circuit isolators

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies requirements, test methods and performance criteria for short-circuit isolators, for use in fire detection and fire alarm systems for buildings (see EN 54-1). Means of isolation or protection incorporated within control and indicating equipment (Item B in Figure 1 of EN 54-1:1996) are not covered by this European Standard.
  • prEN 54-2 rev

    21-08-2014
    00072120

    prEN 54-2 rev Fire detection and fire alarm systems - Part 2: Control and indicating equipment

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements, methods of test, and performance criteria for control and indicating equipment (see item B of figure 1 of EN 54-1:2011) for use in fire detection and fire alarm systems installed in buildings.
  • prEN 54-20 rev

    11-12-2015
    00072127

    Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements, test methods and performance criteria for aspirating smoke detectors for use in fire detection and fire alarm systems installed in buildings. Aspirating smoke detectors developed for the protection of specific risks that incorporate special characteristics (including additional features or enhanced functionality for which this standard does not define a test or assessment method) are also covered by this standard. The performance requirements for any special characteristics are beyond the scope of this standard. NOTE – Certain types of detector contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not therefore specified in this standard.
  • EN 54-3:2014/prA1

    10-11-2014
    00072123

    Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements, test methods and performance criteria for fire alarm sounders, including voice sounders, in a fixed installation intended to signal an audible warning between the fire detection and fire alarm systems and the occupants of a building (see EN 54-1:2011). This European Standard provides for the assessment and verification of constancy of performance (AVCP) of fire alarm sounders to this EN. This European Standard is not intended to cover: a) loudspeaker type devices primarily intended for emitting emergency voice messages that are generated from an external audio source; b) supervisory sounders, for example, within the control and indicating equipment.
  • EN 54-5:2017/prA1

    27-09-2017
    00072143

    Fire detection and fire alarm systems – Part 5: Heat detectors – Point heat detectors

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the requirements, test methods and performance criteria for point heat detectors intended for use in fire detection and fire alarm systems installed in and around buildings (see EN 54-1:2011). This European standard provides for the evaluation of conformity (EoC) of point heat detectors to this EN. For other types of heat detector, or for detectors intended for use in other environments, this standard should only be used for guidance. Heat detectors with special characteristics and developed for specific risks are not covered by this standard.
  • EN 54-7:2015/prA1

    27-09-2017
    00072142

    Fire detection and fire alarm systems – Part 7: Smoke detectors – Point detectors using scattered light, transmitted light or ionization

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This draft European Standard specifies requirements, test methods and performance criteria for point smoke detectors that operate using scattered light, transmitted light or ionization, intended for use in fire detection and fire alarm systems installed in and around buildings (see EN 54 1:2011). This European standard provides for the assessment of verification of consistency of performance (AVCP) of point smoke detectors to this EN. For other types of smoke detector, or smoke detectors working on different principles, this standard should only be used for guidance. Smoke detectors with special characteristics and developed for specific risks are not covered by this standard. NOTE – Certain types of detector contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not specified in this standard.
  • prEN 1568-1 rev

    29-04-2014
    00191271

    Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies requirements for chemical and physical properties, and minimum performance requirements of medium expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking. NOTE Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as low and/or high expansion foams.
  • prEN 1568-2 rev

    29-04-2014
    00191272

    Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of high expansion foams suitable for surface application to waterimmiscible liquids. Requirements are also given for marking. Note: Some concentrates complying with this Part of EN 1568 can also comply with other Parts and therefore can also be suitable for application as low and/or medium expansion foams.
  • prEN 1568-3 rev

    29-04-2014
    00191273

    Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to waterimmiscible liquids. Requirements are also given for marking. NOTE: Some concentrates complying with this Part of EN 1568 can also comply with other
  • prEN 1568-4 rev

    29-04-2014
    00191274

    Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to watermiscible liquids. Requirements are also given for marking. IMPORTANT NOTE: In this part of the European Standard, the fire performance is tested using acetone as the fuel, which also forms the basis for the performance classification. However, there are
  • prEN 1869 rev

    02-11-2012
    00070042

    Fire blanket

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard specifies requirements for fire blankets which are not re-useable and that are intended for use by one person. It is applicable to fire blankets primarily intended for extinguishing cooking oil fires. NOTE: It is anticipated that they can also be used on fires involving personal clothing.
  • prEN 12094-11 rev

    02-03-2016
    00191298

    Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements and test methods for mechanical weighing devices for continuous monitoring of containers of CO2-, Inert Gas- or Halocarbon Gas-Fire Extinguishing Installations. This European Standard does not cover weighing devices for non-transportable containers which are filled and refilled on site, e.g. CO2-low-pressure containers.
  • prEN 12094-12 rev

    24-03-2015
    00191278

    Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This standard specifies the performance criteria for heat exposure and flame resistance, impact resistance, corrosion resistance, vibration/pressure resistance, response delay, operational reliability and sensitivity (audibility)for alarm devices in CO2 extinguishing systems used for fire suppression. This standard includes the corresponding test methods and the evaluation of conformity of the product to this standard.
  • prEN 12094-13 rev

    24-03-2015
    00191276

    Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European standard specifies the requirements and describes test methods for check and non-return valves. This standard is applicable to check valves installed between container valve and manifold and non-return valves installed in pilot lines except those valves, which are tested in combination with non-electrical control devices. Non-return and check valves shall allow the passage in the direction of flow and they shall prevent flow in the reverse direction.
  • prEN 12094-4 rev

    24-03-2015
    00191284

    Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies requirements and describes test methods for container valve assemblies for CO2-high-pressure-, Inert Gas- or Halocarbon Gas-fire extinguishing systems, which include a container valve, an actuator and possibly a diptube. This document specifies requirements and describes test methods for features of the component relevant only for its use in fire extinguishing installations. Diptubes not assembled to the container valves are not covered by this standard. NOTE: Valve assemblies can be equipped with additional components (e.g. gauges and switches).
  • prEN 12094-5 rev

    24-03-2015
    00191282

    Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements and describes test methods for selector valves and their actuators used in CO2 -, Inert Gas- or Halocarbon gas fire extinguishing systems.
  • prEN 12094-6 rev

    24-03-2015
    00191283

    Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements and test methods for non-electrical disable devices for CO2, Inert gas- or Halocarbon gas fire extinguishing systems. Examples are: a) an isolating valve in the pipework to the flooding zone or in a pneumatic pilot line; b) a device blocking the actuator at the bank of containers or the container valve in single-zone installations or the actuator of selector valves in multiple-zone installations.
  • prEN 12094-7 rev

    24-03-2015
    00191279

    Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements and test methods for nozzles which introduce the extinguishing agent into a CO 2 protected zone. The design of the nozzles will influence discharge rate and thus the pressure drop in the piping network. The extinguishing agent normally arrives at the nozzle in two-phase flow form (liquid-gaseous mixture). It expands into the protected volume to form a gas or a gas-and-dry-ice mixture depending on the nozzle type. This standard should only be used as guidance for testing nozzles which work on different principles.
  • prEN 12094-8 rev

    24-03-2015
    00191277

    Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies requirements and describes test methods for flexible and rigid connectors used in CO2 -, Inert Gas- or Halocarbon gas fire extinguishing systems. This European Standard is applicable to connectors used: - between container valves and the manifold (type 1 and type 5 connector); - in pneumatic pilot lines (type 3 connector); in distribution pipework of fire extinguishing installations downstream of the manifold/selector valve (type 2 or type 4 connector).

Næste >