Velkommen til portalen for nye arbejdsemner

27 Hits

DS/S-347-Vejmaterialer og vejbygning


Næste >
  • No reference

    22-06-2007
    00336098

    Bitumen and bituminous binders - Determination of low temperature properties

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Bituminous binders for paving applications
  • No reference

    22-06-2007
    00336099

    Bitumen and bituminous binders - Determination of long term ageing procedure

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Bituminous binders for paving applications
  • No reference

    22-06-2007
    00336100

    Bitumen and bituminous binders - Option for the inclusion in hENs of special bitumen for paving applications

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Special bitumen for paving
  • No reference

    22-06-2007
    00336101

    Bitumen and bituminous binders - Substitution of natural filler by a synthetic product as reference material

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Evaluation of a range of synthetic materials as potential substitute in EN 12849, EN 13075-1 and EN 13075-2
  • No reference

    22-06-2007
    00336097

    Bitumen and bituminous binders - Determination of consistency

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Bituminous binders for paving applications
  • No reference

    22-08-2008
    00336127

    Bitumen and bituminous binders - Recommendations for updating the precision of test methods

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Bituminous binders for paving application – Test methods precision: recommendations.
  • No reference

    22-06-2012
    00336171

    Recommendations for updating the precision of test methods on fluxed bitumen and bituminous emulsions

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    The CEN TC 336, Bituminous Binders having considered the TC 336 WG 2 report document N391 presenting recommendations for working on the improvement of test method precision on fluxed bitumen and bituminous emulsions decides to create a preliminary work item to prepare recommendations for updating the precision of test methods on fluxed bitumen and bituminous emulsions.
  • No reference

    13-08-2014
    00227426

    Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document defines different possible methods for processing digitised road profiles: - Computation of the International Roughness Index (IRI) ; based on the Golden car characteristics, - Spectral analyses : Wave band analysis and Spectrum analysis, based on the Power Spectral Density (PSD).
  • prEN 932-3 rev

    13-03-2009
    00154132

    Tests for geometrical properties of aggregates - Part 3: Procedure and Terminology for simplified petrographic design

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Komite
    Beskrivelse
    This European standard specifies a basic procedure for the petrographic examination of aggregates for the purposes of general classification. The procedure is not suitable for the detailed petrographical study of aggregates for specific end uses.
  • prEN 932-3 rev

    04-03-2019
    00154193

    Tests for general properties of aggregates – Part 3: Procedure and terminology for simplified petrographic description

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European standard specifies a bsic procedure for the petrographic examination of aggregates for the purposes of general classification. The procedure is not suitable for the detailed petrographical study of aggregates for specific end uses.
  • prEN 932-5 rev

    29-01-2015
    00154169

    Tests for general properties of aggregates - Part 5: Common equipment and calibration

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies general requirements for common equipment, calibration and checking procedures and reagents for the testing of the properties of aggregates. In the case of checking, other procedures than the ones described in this standard may be used provided that appropriate working relationships with the corresponding methods described in this standard have been established. In case of dispute, the checking methods described in this standard shall be used.
  • prEN 933-xx

    21-12-2012
    00154154

    Tests for geometrical properties of aggregates - Part xx: Testing method to increase accuracy evaluation of the percentage of crushed surfaces of aggregates

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This part of EN 933 will be a testing method to increase accuracy evaluation of the percentage of crushed surfaces of aggregates
  • prEN 933-9 rev

    21-12-2012
    00154155

    Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This standard describes the reference method used for type testing and in cases of dispute for the determination of the methylene blue value of the 0/2 mm fraction in fine aggregates or all-in aggregates (MB). It also describes the reference method for the determination of the methylene blue value of the 0/0,125 mm fraction (MBF) in Annex A. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the suitable reference method has been established.
  • prEN 12272-2 rev

    07-11-2008
    00227294

    Test method for the rate of spread and accuracy of spread of binder and chippings

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies test methods for determining the rates of spread and accuracy of spread of binder and chippings of a surface dressing on a section of road at a given time. It is also applicable to surface dressings on airfields and other trafficked areas. The test methods are used on site to check the ability of binder sprayers and chipping spreaders to meet the intended rates of spread and tolerances and coefficients of variation. The test methods for measuring the rates of spread and accuracy of spread of binders and chippings are not applicable to combined chipping-binder spreaders.
  • prEN 12274-5 rev

    23-05-2014
    00227419

    Slurry surfacing - Test method - Part 5: Determination of wearing

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a test method for the design of slurry mix based on the determination of the minimum binder content of the mix under wet track abrasion conditions. This European Standard applies to slurry surfacing to be used in surface layers.
  • prEN 12274-6 rev

    23-05-2014
    00227420

    Slurry surfacing - Test methods - Part 6: Rate of application

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies test methods for determination the average rate of application of a slurry surfacing in kilograms per square metre (kg/m²). The European Standard applies to slurry surfacings for roads, airfields and other trafficked areas.
  • prEN 12697-48

    29-06-2015
    00227435

    Bituminous mixtures - Test methods for hot mix asphalt - Part 48: Interlayer Bonding

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies test methods for determining the bond strength between an asphalt layer and other construction layers in road or airfield pavement. The tests can also be applied on laboratory prepared interlayers. Further informative test methods are defined for evaluating the complex bond stiffness between road construction layers. The normative tests described in this standard are Torque bond test (TBT), Shear bond test (SBT) and Tensile Adhesion Test (TAT). Further two test methods for evaluating the complex bond stiffness are described in informative annexes: Compressed shear bond test (CSBT) and Cyclic compressed shear bond test (CCSBT). NOTE – The described test methods simulate different loading conditions and are applicable on different bonds between road construction layers: The torque bond test assesses the resistance to horizontal shear stress: The torque bond test is suitable for testing the bond strength between road layers in laboratory and in situ. The torque bond test assesses the resistance to the stresses generated primarily by traffic accelerating or braking, but also by thermal movements when the layers are of different materials (e.g. asphalt, microsurfacing or cement concrete) The torque bond test can be carried out immediately after laying. The torque bond test can be applied for assess the capability of bond coats or tack coats. When the thickness of the top layer above the interlayer assessed is less than 15 mm, the torque bond test can be applied for evaluating the durability of the top layer. The shear bond test assesses the resistance to horizontal shear stresses in the interlayer of two road construction layers. The shear bond test assesses the resistance to the stresses generated primarily by traffic accelerating or braking, but also by thermal movements when the layers are of different materials (e.g. asphalt, microsurfacing or cement concrete). The shear bond test can be applied for assess the capability of bond coats or tack coats. The shear bond test is suitable to evaluate the shear bond strength of construction layers with a thickness  20 mm. The tensile adhesion test assesses the tensile bond strength between two road construction layers. The test method is applicable on thin surface layers. The compressed shear bond test assesses shear behaviour of interlayers subjected to both horizontal and vertical traffic loads. The cyclic compressed shear bond tests assesses the interlayer bond stiffness at various temperatures, loading frequencies and normal stress levels.
  • EN 13055:2016/prA1

    30-11-2018
    00154173

    Lightweight aggregates

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the properties of Lightweight Aggregates (LWA) and fillers derived thereof obtained by processing natural or manufactured materials and mixtures of these aggregates for concrete, mortar and grout, bituminous mixtures and surface treatments and for unbound and hydraulically bound applications in construction works. This European Standard covers LWA of mineral origin having particle densities not exceeding 2000 kg/m3 (2,000 Mg/m3) or loose bulk densities not exceeding 1200 kg/m3 (1,200 Mg/m3) including: a) natural LWA; b) LWA manufactured from natural materials; c) LWA manufactured from by-products of industrial processes or from recycled source materials; d) LWA as by-products of industrial processes. A list of source materials and specific materials, which are within the scope of this standard, is given in Annex A (normative). NOTE – Recycled aggregates from construction and demolition waste and Municipal Solid Waste Incinerator Bottom Ash (MIBA) are covered by standards EN 12620, EN 13043, EN 13139 and EN 13242. Some LWA for specific applications are covered in separate European product standards (Annex B, normative). The requirements specified in this standard may not be equally relevant to all types of LWA. For particular applications, the requirements and tolerances can be adapted for the end use.
  • EN 13285:2010/prA1

    13-07-2012
    00227361

    Unbound mixtures - Specifications - Amendment on Factory Production Control and Annex ZA

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    This European Standard specifies requirements for unbound mixtures used for construction and maintenance of roads, airfields and other trafficked areas. The requirements are defined with appropriate cross-reference to EN 13242. This European Standard applies to unbound mixtures of natural, artificial and recycled aggregates with a upper sieve size (D) from 8 mm to 90 mm and lower sieve size (d) = 0 at the point of delivery. NOTE 1 Mixtures with an upper sieve size (D) greater than 90 mm are not covered by this European Standard but may be specified in the place of use. NOTE 2 Water content of the mixture and the density of the installed layer are not specified mixture requirements. Both parameters are related to the control of the construction of the layer and are outside the scope of this European Standard.
  • prEN 13302 rev

    02-06-2015
    00336187

    Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a method for the determination of the dynamic viscosity of a variety of bituminous binders: modified and unmodified bituminous binders, bituminous emulsions, cut-back and fluxed bituminous binders, by means of a coaxial viscometer. Standard application temperatures are quoted, although the dynamic viscosity can be measured at other temperatures if required. Similarly, viscosity is quoted at standard rates of shear, although additional measures can be taken at varying shear rates if required. WARNING The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
  • prEN ISO 13473-1 rev

    04-07-2014
    00227424

    Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    .....
  • prEN 13880-10 rev

    06-10-2014
    00227326

    Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes a method for determining the adhesion and cohesion characteristics of hot applied joint sealant specimens following continuous extension and compression bond testing.
  • prEN 13880-13 rev

    06-10-2014
    00227327

    Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes a method for determining the cohesive extensibility and the adhesion to concrete of hot applied sealant-systems with or without priming simulating the moving of concrete pavement slabs during cooling conditions in wintertime.
  • prEN 13880-7 rev

    06-10-2014
    00227324

    Hot applied joint sealants - Part 7: Function testing of joint sealants

    Oprindelse:
    CEN
    International kategori
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes a function test for joint sealants intended for use in construction joints as well as in spontaneously formed cracks in road and airfield pavements.
  • prEN 13880-8 rev

    06-10-2014
    00227325

    Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard describes a method for determining the joint sealant resistance to fuel spillage by calculating the change in mass (if any), after immersion in the standard reference fuel.

Næste >