Velkommen til portalen for nye arbejdsemner

47 Hits

DS/S-381-Vejvedligeholdelse, vintertjenester og affaldshåndtering


Næste >
  • ISO/NP 6405-1

    23-01-2009
    6405-1

    Earth-moving machinery - Symbols for operator controls and other displays - Part 1: Common symbols

    Oprindelse:
    ISO
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • ISO/NP 6683

    12-01-2017
    073140

    Earth-moving machinery -- Seat belts and seat belt anchorages -- Performance requirements and tests

    Oprindelse:
    ISO
    International kategori
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
  • ISO/NP 17740-1

    25-08-2011
    17740-1

    Building construction machinery and equipment - Concrete placing booms - Part 1: Terminology and commercial specifications

    Oprindelse:
    ISO
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • No reference

    21-11-2008
    00151311

    Requirements for equipment for supply of breath to the operator"s cabs used on Earth-Moving Machinery

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    Earth-moving machinery
  • No reference

    02-12-2011
    00151405

    Machinery and plants for the preparation of concrete and mortar - Safety requirements - Specific requirements for small mobile tipping drum mixers

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
    Beskrivelse
    1.1 This document applies for small mobile tipping drum mixers as defined in 3.1. This document specifies the requirements for the design of mixers with tilting drum and with manual feeding.It does not include requirements relevant to mixing plants for batching (EN 12151-1) or continuous production, truck mixers (prEN 12609), self-propelled machines, conveying, spraying and placing machines for concrete and mortar (EN 12001 and e.g. B.17). The machinery may be stationary or it may be capable of being transported to an alternative position. 1.2 This document deals with all significant hazards, hazardous situations and events relevant to mixers with tilting drum and with manual feeding, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The exceptions are explosion hazards when using flammable or explosive materials that are significant but not dealt with. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.Maintenance is dealt with but not noise during maintenance. 1.3 This document is not applicable to mixers with tilting drum and with manual feeding which are manufactured before the date of publication of this document by CEN.
  • No reference

    05-02-2015
    00151428

    Road operation machinery - Safety - Part 1: General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies the common safety requirements for road operation machinery. This document deals with the significant hazards common to road operation machinery, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping). NOTE – The requirements specified in this part of the standard are common to two or more families of road operation machinery. This document gives safety requirements for all types of road operation machinery and shall be used in conjunction with one of parts x to xx. These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of road operation machinery in question. This European Standard applies to: a) Road surface cleaning machines (as currently defined in EN 15429-1); b) Winter service machines (as defined in group 1 and 2 of EN 15144); c) Road service area maintenance machines for:  grass cutting (see Clause 3.1.1.1 of EN 15436-1:2008);  brush/hedge cutting (see Clause 3.1.1.2 of EN 15436-1:2008);  mechanical plant/branch cutting (see Clauses 3.1.2 and 3.2.3 of EN 15436-1:2008). This standard deals with: a) equipment permanently mounted on carrier vehicles; b) interchangeable equipment; c) self-propelled machinery with an integrated specially designed chassis; d) trailed machines; e) interfaces. For multipurpose machinery the parts of the standard that cover the specific functions and applications have to be used, e.g. sweeper used for spreading thawing material or snow removing machines with brooms and ploughs shall use the relevant requirements of prEN xxx parts x, x, x. Road operation machinery within the scope of prEN xxx parts x to x may include interchangeable auxiliary equipment within the scope of prEN ...
  • No reference

    05-02-2015
    00151445

    EN 474 Earth-moving machinery – Safety – Part 13: Requirements for rollers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for earth-moving machinery – hydraulic excavators when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 474-1. This document does not repeat the requirements from EN 474-1, but adds or replaces the requirements for application for earth moving machinery – rollers. This part of EN 474 is not applicable for seated ride-on operated rollers with a drum width less than nominal 0,8 m.
  • No reference

    05-02-2015
    00151423

    Road operation machinery - Safety - Part 4-1: Road service area maintenance machines - Requirements for grass and brush/hedge cutting machines

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for road service area maintenance machines – grass and brush/hedge cutting machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in prEN xxx-1:20xx. This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for road service area maintenance machines – grass and brush/hedge cutting machines.
  • No reference

    05-02-2015
    00151429

    Road operation machinery - Safety - Part 2: Requirements for road surface cleaning machines

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for road surface cleaning machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in prEN xxx-1:20xx. This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for road surface cleaning machines.
  • No reference

    05-02-2015
    00151427

    Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for winter service machines – snow cleaning machines with rotating tools when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in prEN xxx-1:20xx. This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for winter service machines – snow cleaning machines with rotating tools.
  • No reference

    05-02-2015
    00151424

    Road operation machinery - Safety - Part 3-2: Winter service machines - Requirements for snow ploughs

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for winter service machines – snow ploughs when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in prEN xxx-1:20xx. This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for winter service machines – snow ploughs.
  • No reference

    05-02-2015
    00151426

    Road operation machinery - Safety - Part 3-3: Winter service machines - Requirements for spreading machines

    Oprindelse:
    CEN
    Emner
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document, together with part 1, deals with all significant hazards for winter service machines – spreading machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in prEN xxx-1:20xx. This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for winter service machines – spreading machines.
  • prEN 474-1 rev

    03-02-2015
    00151433

    Earth-moving machinery - Safety - Part 1: General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies the general safety requirements for earth-moving machinery 1) described in EN ISO 6165:2012, except horizontal directional drill. NOTE 1 – Horizontal directional drills are covered by the EN 16228 series. This European standard also applies to derivative machinery (see 3.1.2) designed primarily for use with equipment to loosen, pick-up, move, transport, distribute and grade earth and rock. This European standard gives the common safety requirements for earth-moving machinery families and is intended to be used in conjunction with one of the EN 474 parts 2 to 12 13 These machine specific parts (EN 474-2 to – 13) do not repeat the requirements from EN 474-1:201x, but add or replace the requirements for the family in question. NOTE 3 – The requirements specified in this part of the standard are common to two or more families of earth- moving machinery. This part gives specific requirements for demolition machinery. Specific requirements in EN 474 parts 2 to 13 take precedence over the respective requirements of EN 474-1:201x. For multipurpose machinery the parts of the standard that cover the specific functions and applications have to be used e.g. a compact loader also used as a trencher shall use the relevant requirements of EN 474 parts 1, 3 and 10. The standard also covers general requirements for attachments intended to be used with earth moving machine families covered in the scope. Except for part 12 this European Standard does not deal with the electrical hazards related to the main circuits and drives of machinery when the principal source of energy is electrical. This European Standard does not deal with towing of trailers. This European Standard deals with all significant hazards, hazardous situations and events relevant to earth-moving machinery, when used as intended and under conditions foreseen but also taking taking into account nay reasonably foreseeable misuse thereof (see Clause 4). This European Standard specifies ...
  • prEN 474-10 rev

    04-02-2015
    00151437

    Earth-moving machinery - Safety - Part 10: Requirements for trenchers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to trenchers as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not deal with the specific hazards related to derivative use. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for trenchers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of trenchers. This European Standard is not applicable to trenchers manufactured before the date of publication of this European Standard by CEN.
  • EN 474-1:2006/prA5

    25-03-2015
    00151450

    Earth-moving machinery - Safety - Part 1: General requirements

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
  • prEN 474-11 rev

    04-02-2015
    00151443

    Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to earth and landfill compactors as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Other compactors such as roller compactors, rammer compactors and vibratory plates, which are dealt with in EN 500-1:2006 and EN 500-4:2006 are not covered in EN 474. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for earth and landfill compactors. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of earth and landfill compactors. This part does not deal with the specific hazards related to derivative use. This European Standard is not applicable to earth and landfill compactors manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-12 rev

    04-02-2015
    00151442

    Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to cable excavators as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard applies also to cable excavators, their undercarriage and upper-structure, if intended for use in combination with other equipment or attachment, such as drill rigs, pile driving and extracting equipment and moving equipment (e.g. rail track, walking legs, pontoon, ship) or stationary undercarriage. This European Standard is not dealing with the specific hazards due to these additional equipment or attachment. NOTE – For these additional equipment or attachment, relevant specific European Standards should be considered where available, for example: - for drilling- and foundation equipment, EN 16228 parts 1-7 The requirements of this part are complementarily to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for cable excavators. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of the machinery in the scope. This European Standard is not applicable to cable excavators manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-2 rev

    04-02-2015
    00151434

    Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler tractor-dozers as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with rear-mounted winches for use on tractor-dozers. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for tractor-dozers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of tractor-dozers. This European Standard is not applicable to tractor-dozers manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-3 rev

    04-02-2015
    00151438

    Earth-moving machinery - Safety - Part 3: Requirements for loaders

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to loaders as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with fork application, single heavy object handling application, object handling application and log handling. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for loaders. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of loaders. This European Standard is not applicable to loaders manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-4 rev

    04-02-2015
    00151436

    Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler backhoe loaders as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with fork application, object handling application and log handling. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006+A1:2009. This does not repeat the requirements from EN 474-1:2006+A1:2009, but adds or replaces the requirements for application for backhoe loaders. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of backhoe loaders. This European Standard is not applicable to machinery manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-5 rev

    04-02-2015
    00151444

    Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all specific significant hazards, hazardous situations and events relevant to hydraulic excavators as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with object handling application, shovel application and log application. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006+A3:2013. This part does not repeat the requirements from EN 474-1:2006+A3:2013, but adds or replaces the requirements for application for hydraulic excavators. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of hydraulic excavators. This European Standard is not applicable to hydraulic excavators manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-6 rev

    04-02-2015
    00151435

    Earth-moving machinery - Safety - Part 6: Requirements for dumpers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler dumpers as defined in EN ISO 6165:2006, including compact dumpers, and compact dumpers with standing operator when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The requirements of this part are complementary to common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for dumpers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of dumpers. Pedestrian controlled dumpers are excluded from the scope of this European Standard. This European Standard is not applicable to dumpers, manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-7 rev

    04-02-2015
    00151439

    Earth-moving machinery - Safety - Part 7: Requirements for scrapers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler scrapers except towed scrapers as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for scrapers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of scrapers. This European Standard is not applicable to scrapers manufactured before the date of publication of this European Standard by CEN.
  • prEN 474-8 rev

    04-02-2015
    00151440

    Earth-moving machinery - Safety - Part 8: Requirements for graders

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to graders as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with graders equipped with attached snowplough. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for graders. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of graders. This European Standard is not applicable to graders manufactured before the date of publication of this European Standard by CEN. NOTE – When graders are intended for use in winter service, see EN 13021:2003 :Winter service machines – Safety requirements
  • prEN 474-9 rev

    04-02-2015
    00151441

    Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to pipelayers as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for pipelayers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of pipelayers. This part specifies additional requirements for rear mounted winches. Pipelayers with rotating upper structure are excluded from the scope of this document. However, specific requirements are under development. This European Standard is not applicable to pipelayers manufactured before the date of publication of this European Standard by CEN.

Næste >