Velkommen til portalen for nye arbejdsemner

15 Hits

DS/S-395-Tagdækning og vægbeklædning


  • No reference

    03-12-2014
    00128142

    Solar Energy systems for roofs: Requirements for structural connections to solar panels

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This technical report provides fuidance on the principles and requirements of structural desing for the safety and serviceability of the structural connection between solar eneergy panels (thermal or photovoltaic) that are mounted on flat or pitched roofs. This technical report does not include requirements for: Weather tightness of the roof, solar panels and connections; Electrical, thermal or mechanical characteristics of the solar panels; Precautions against fire of the installation.
  • prEN 1107-1 rev

    24-07-2009
    00254107

    Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • prEN 1296 rev

    25-08-2006
    00254116

    Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • prEN 1928 rev

    25-08-2006
    00254118

    Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne under udarbejdelse
  • prEN 12691 rev

    26-06-2014
    00254158

    Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Determination of resistance to impact

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a test for puncture by impact on sheets for roof waterproofing. Mechanical stress on waterproofing sheets ranges from static long-term loads to dynamic short-term loads. This method represents the dynamic category of load where puncture may be caused by impact. This European Standard may also be applied for other purposes of waterproofing.
  • prEN 13653 rev

    11-06-2015
    00254166

    Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document is one of a series of standards applicable to flexible sheets for waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. This document specifies a test method for the evaluation of the shear strength properties of the waterproofing sheet system applied to a concrete surface and with an asphalt layer.
  • EN 13967:2012/prA1

    08-08-2014
    00254159

    Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The scope of this amendment includes: - the introduction of CPR requirements (e.g. Annex ZA, clause 6) - removal of Product Data Sheets descriptions (e.g. clause 7 and Annex D) - reference to CEN/TR 16625 for MLV/MDV - correction of minor editorial issues.
  • EN 13984:2013/prA1

    08-08-2014
    00254160

    Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The scope of this amendment includes: - the introduction of CPR requirements (e.g. Annex ZA, clause 6) - removal of Product Data Sheets descriptions (e.g. clause 7 and Annex D) - reference to CEN/TR 16625 for MLV/MDV - correction of minor editorial issues.
  • prEN 14223 rev

    11-06-2015
    00254162

    Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a test method for the determination of water absorption in reinforced bitumen sheets which could influence the functional behaviour of these sheets. NOTE – It is primarily the reinforcement's ability to absorb water which is examined by this test.
  • prEN 14691 rev

    11-06-2015
    00254164

    Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a test method for the evaluation of the compatibility of the waterproofing system applied to a concrete surface and covered with an asphalt layer. The complete system is exposed to an accelerated heat conditioning followed by a determination of the shear strength properties before and after heat conditioning.
  • prEN 14692 rev

    11-06-2015
    00254165

    Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies a test method for the evaluation of the resistance of a bitumen sheet to compaction of an asphalt layer.
  • prEN 14693 rev

    11-06-2015
    00254167

    Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard is applicable to bitumen sheets intended for use with a layer of mastic asphalt. This European Standard specifies a test method for the evaluation of the resistance of bitumen sheets to the rising of the bitumen compound at the application of mastic asphalt in a non-floating manner. NOTE – This European Standard could also be used for bitumen sheets intended for use with other asphalt types as a protection layer.
  • prEN 14694 rev

    11-06-2015
    00254168

    Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This document specifies a test method for the evaluation of the resistance to impact puncturing of a sheet or sheet system.
  • EN 14909:2012/prA1

    08-08-2014
    00254161

    Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    The scope of this amendment includes: - the introduction of CPR requirements (e.g. Annex ZA, clause 6) - removal of Product Data Sheets descriptions (e.g. clause 7 and Annex D) - reference to CEN/TR 16625 for MLV/MDV - correction of minor editorial issues.
  • prEN 16002 rev

    11-06-2015
    00254163

    Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing

    Oprindelse:
    CEN
    Status
    Forslag om nyt arbejdsemne vedtaget
    Beskrivelse
    This European Standard specifies a test method to determine the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing. The assessment is limited to the performance of the mechanically fastened flexible sheets only. The test method does not include the determination of the performance of the mechanical fastener and/or the combination of the mechanical fastener and the substrate.