DS/EN 50121-5:2017

Jernbaner – Elektromagnetisk kompatibilitet – Del 5: Faste strømforsyningsinstallationers og -anlægs emission og immunitet

Pris fra:
kr. 423,00


Harmoniseret under:
  • Europa-Parlamentets og Rådets direktiv 2014/30/EU af 26. februar 2014 om harmonisering af medlemsstaternes lovgivning om elektromagnetisk kompatibilitet (omarbejdning) EØS-relevant tekst

Harmoniserede standarder:


This European Standard applies to emission and immunity aspects of EMC for electrical and electronic apparatus and systems intended for use in railway fixed installations for power supply. This includes the power feed to the apparatus, the apparatus itself with its protective control circuits, trackside items such as switching stations, power autotransformers, booster transformers, substation power switchgear and power switchgear to other longitudinal and local supplies.
Filters operating at railway system voltage (for example, for harmonic suppression or power factor correction) are not included in this standard since each site has special requirements. Filters would normally have separate enclosures with separate rules for access. If electromagnetic limits are required, these will appear in the specification for the equipment.
If a port is intended to transmit or receive for the purpose of radio communication (intentional radiators, e.g. transponder systems), then the radiated emission requirement in this standard are not intended to be applicable to the intentional transmission from a radio-transmitter as defined by the ITU.
The frequency range considered is from DC to 400 GHz. No measurements need to be performed at frequencies where no requirement is specified.
Emission and immunity limits are given for items of apparatus which are situated:
a) within the boundary of a substation which delivers electric power to a railway;
b) beside the track for the purpose of controlling or regulating the railway power supply, including power factor correction;
c) along the track for the purpose of supplying electrical power to the railway other than by means of the conductors used for contact current collection, and associated return conductors. Included are high voltage feeder systems within the boundary of the railway which supply substations at which the voltage is reduced to the railway system voltage;
d) beside the track for controlling or regulating electr ...

Antal sider: 22

Udgivet: 2017-03-20

Godkendelsesdato: 2017-03-13

Internationale relationer: EN 50121-5:2017 IDT

ICS: 29.280 - Elektrisk traktionsudstyr 33.100.01 - Elektromagnetisk kompatibilitet. Generelt 45.020 - Jernbaneteknik. Generelt

Varenummer: M306968

Udvalg og komiteer


  • CLC/TC 9X

Dansk udvalg