ASTM A1084 - 15a

Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels


Status:
Gældende
Type:
Standard
Sprog:
EN
Pris fra:
kr. 351,85

Beskrivelse

1.1 The purpose of this test method is to allow detection of the presence of detrimental chromium-containing phases in selected lean duplex stainless steels to the extent that toughness or corrosion resistance is affected significantly. Such phases can form during manufacture and fabrication of lean duplex products. This test method does not necessarily detect losses of toughness nor corrosion resistance attributable to other causes, nor will it identify the exact type of detrimental phases that caused any loss of toughness or corrosion resistance. The test result is a simple pass/fail statement.1.2 Lean duplex (austenitic-ferritic) stainless steels are typically duplex stainless steels composed of 30 to 70?% ferrite content with a typical alloy composition having Cr > 17?% and Mo < 1?% and with additions of Nickel, Manganese, Nitrogen and controlled low carbon content as well as other alloying elements. This standard test method applies only to those alloys listed in Table 1. Simila

Antal sider: 18

Internationale relationer :

ICS: 77.040.99 - Andre metoder til prøvning af metaller

Varenummer: A011798