ASTM F37 - 06(2019)

Standard Test Methods for Sealability of Gasket Materials

Pris fra:
kr. 302,88


1.1 These test methods provide a means of evaluating the sealing properties of sheet and solid form-in-place gasket materials at room temperature. Test Method A is restricted to liquid leakage measurements, whereas Test Method B may be used for both liquid and gas leakage measurements.1.2 These test methods are suitable for evaluating the sealing characteristics of a gasket material under different compressive flange loads. The test method may be used as an acceptance test when the producer and user have agreed to specific test conditions for the following parameters: test medium, internal pressure on medium, and flange load on gasket specimens.1.3 These test methods use a small-diameter narrow-width gasket as the test specimen under relatively low gasket loads and relatively low pressures. Test Method F2378 is another sealability test method that uses a larger gasket specimen and higher internal pressures and flange loads.1.4 The values stated in SI units are to be regarded as the st

Antal sider: 8

Internationale relationer :

ICS: 21.140 - Tætninger, pakninger

Varenummer: A006564