ASTM A367 - 11(2017)

Standard Test Methods of Chill Testing of Cast Iron


Status:
Gældende
Type:
Standard
Sprog:
Engelsk
Pris fra:
kr. 279,84

Beskrivelse

1.1 These test methods of chill testing apply to gray irons that are to be free of chill in the casting and to chilled irons that are to have a specific depth of chill in the casting. Two test methods of determining the chilling tendencies of cast iron are covered as follows. For many applications, either test method will be satisfactory if test pieces of the proper dimensions are selected.1.1.1 Test Method A, Wedge Test—This test is generally better adapted to the higher-strength gray irons. The accelerated cooling rate to induce the formation of a chill is brought about through the design of the test specimen. This test method is simpler than Test Method B since maintenance of chill blocks or plates is not necessary.1.1.2 Test Method B, Chill Test—This test is better adapted to the softer grades of gray iron and should be used if the casting is to have a specified depth of chill. The chill in this type of test is induced by casting one edge of the test specimen against a metal or g

Antal sider: 4

Internationale relationer :

ICS: 77.140.80 - Jern- og stålstøbegods

Varenummer: A003126