DS/ISO/TR 19688:2019

Rotordynamiske pumper – Godkendelse af hydraulikpræstation ved brug af modelpumpe

Pris fra:
kr. 719,00


This document describes hydraulic performance tests (including cavitation tests) using a small size pump (centrifugal, mixed flow or axial pump, hereinafter referred to as a "model pump").
This document is used for pump acceptance tests with a geometrically similar model pump to guarantee the performance of a large size pump manufactured for practical use (hereinafter, a "prototype pump"). This document, however does not preclude a temporary assembly inspection or other tests on the prototype pump. Moreover, it is preferable to conduct the tests with prototype pumps unless
— the capacity of the pump, namely its flow rate and/or its power input, is beyond the limitations of the test facility, though it is difficult to set a criterion for carrying out a model pump test instead of the prototype pump test in terms of the volume rate of flow or the power input,
— a part of the pump is to be constructed by concrete walls and reproduction of the whole assembly is impractical,
— model tests are specified by the purchaser, or
— it is difficult to carry out the prototype pump test due to any other reasons.
This document applies to performance tests under steady operating conditions corresponding to the prototype pump.

Antal sider: 54

Udgivet: 2019-01-17

Godkendelsesdato: 2019-01-14

Internationale relationer : ISO/TR 19688:2019 IDT

ICS: 23.080 - Pumper

Varenummer: M322504

Udvalg og komiteer


  • ISO/TC 115/SC 2
  • ISO/TC 115/SC 2/WG 4

Dansk udvalg