1368 products found

Please choose at least one filter


Published from

Time limit for review from

Withdrawn from

Released from

Reset
  • Origin

  • Type

  • Status

  • Legislation

  • Subjects

DS 4:1964

Whitworth screw threads, 1/4...6 inches


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS/ISO 14:1983

Straight-sided splines for cylindrical shafts with internal centering - Dimensions, tolerances and verification


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/ISO 15:2017

Rolling bearings – Radial bearings – Boundary dimensions, general plan


Status:
Current
Type:
Standard
Language:
EN
Subject:
Price from:
€ 74.56

DS 42:1964

Whitworth fine screw threads, 7/32...3 inches


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS 44:1967

Internal thread runout and undercut - ISO metric thread


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS 56:1986

Technical drawings - Representation of screws and nuts


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS/ISO 68-1:1999

ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/ISO 68-2:1999

ISO general purpose screw threads - Basic profile - Part 2: Inch screw threads


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS 94:1933

Tangential keys and keyways for unidirectional torque - Shaft diameter and corresponding keyway section


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS 95:1933

Tangential keys and keyways for bidirectional torque - Shaft diameter and corresponding keyway section


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS 96:1975

Parallel keys - Application and dimensions


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS 98:1968

Parallel keys - Holes for hold down and lifting screws


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS 99:1933

Woodruff keys - Shaft diameters, dimensions of corresponding Woodruff keys and keyway depth in shaft and hub


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS/ISO 104:2015

Rolling bearings - Thrust bearings - Boundary dimensions, general plan


Status:
Current
Type:
Standard
Language:
EN
Subject:
Price from:
€ 68.11

DS 113.2:1978

Lifting eye bolts


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS/ISO 113:2010

Rolling bearings - Plummer block housings - Boundary dimensions


Status:
Current
Type:
Standard
Language:
EN
Subject:
Price from:
€ 41.78

DS-håndbog 114.6:2017 Bind 1+2

DS-håndbog 114.6:2017 Bind 1+2

Geometrical product specifications (GPS) – Part 6: Complementary GPS standards – Processspecific tolerance standards and machine element geometry standards


Status:
Current
Type:
Handbook
Language:
DA;EN
Subject:
Price from:
€ 402.34

DS 133:1975

Shaft heights - Driving and driven machines


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS-håndbog 142:2011

DS-håndbog 142:2011

FMEA - Failure Mode and Effect Analysis - Practical application


Status:
Current
Type:
Handbook
Language:
DA
Price from:
€ 66.50

DS-håndbog 168:2020

DS-håndbog 168:2020

Maintenance – Standards for maintenance


Status:
Current
Type:
Handbook
Language:
DA;EN
Price from:
€ 268.00

DS/EN ISO 225:2010

Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions


Status:
Current
Type:
Standard
Language:
EN;FR;RU;DE
Price from:
€ 104.65

DS/EN ISO 228-1:2003

Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 45.81

DS/EN ISO 228-2:2003

Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 56.83

DS/ISO 261:1999

ISO general purpose metric screw threads - General plan


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/ISO 262:1999

ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 26.20

DS/ISO 263:1988

ISO inch screw threads - General plan selection for screws, bolts and nuts - Diameter range 0.06 to 6 in


Status:
Current
Type:
Standard
Language:
DA;EN
Price from:
€ 26.20

DS/ISO 272:1980

Fasteners - Hexagon products - Width across flats


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS/ISO 273:1992

Fasteners - Clearance holes for bolts and screws


Status:
Current
Type:
Standard
Language:
DA;EN
Price from:
€ 19.48

DS/ISO 281:2007

Rolling bearings - Dynamic load ratings and rating life


Status:
Current
Type:
Standard
Language:
EN
Subject:
Price from:
€ 104.65

DS/ISO 355:2019

Rolling bearings – Tapered roller bearings – Boundary dimensions and series designations


Status:
Current
Type:
Standard
Language:
EN
Subject:
Price from:
€ 96.59

DS 680:1991

ISO metric coarse threads from 1 to 68 mm diameter - Limits


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 26.20

DS 681:1991

ISO metric fine threads from 1 to 24,5 mm diameter - Limits


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 41.78

DS 682:1991

ISO metric fine threads from 25 to 52 mm diameter - Limits


Status:
Current
Type:
Standard
Language:
DE
Price from:
€ 41.78

DS 683:1991

ISO metric fine threads from 53 to 110 mm diameter - Limits


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 41.78

DS 684:1991

ISO metric fine threads from 112 to 180 mm diameter - Limits


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 41.78

DS 685:1990

Steel conduit thread - Sizes


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 19.48

DS 686:1990

Knuckle thread - Profiles, basic sizes, general plan


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 26.20

DS 687:1990

Knuckle thread - Deviations and tolerances


Status:
Current
Type:
Standard
Language:
DA
Price from:
€ 26.20

DS/ISO 724:1995

ISO general-purpose metric screw threads - Basic dimensions


Status:
Current
Type:
Standard
Language:
DA;EN
Price from:
€ 45.81

DS/ISO 724/Corr. 1:2009

ISO general-purpose metric screw threads - Basic dimensions


Status:
Current
Type:
Correction sheet
Language:
EN
Price from:
€ 0.00

DS/ISO 725:2009

ISO inch screw threads - Basic dimensions


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 56.83

DS/EN 751-1:1997

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/EN 751-2:1997

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/EN 751-3+AC:1997

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/ISO 885:2007

General purpose bolts and screws - Metric series - Radii under the head


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/EN ISO 887:2000

Plain washers for metric bolts, screws and nuts for general purposes - General plan


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 45.81

DS/EN ISO 887/AC:2006

Plain washers for metric bolts, screws and nuts for general purposes - General plan


Status:
Current
Type:
Correction sheet
Language:
EN
Price from:
€ 0.00

DS/EN ISO 888:2018

Fasteners – Bolts, screws and studs – Nominal lengths and thread lengths (ISO 888:2012)


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 45.81

DS/EN ISO 898-1:2013

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 104.65

DS/EN ISO 898-2:2012

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 74.56

DS/EN ISO 898-3:2018

Mechanical properties of fasteners made of carbon steel and alloy steel – Part 3: Flat washers with specified property classes (ISO 898-3:2018)


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 68.11

DS/EN ISO 898-5:2012

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 60.99

DS/EN 912:2011

Timber fasteners - Specifications for connectors for timbers


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 96.59

DS/ISO 965-1:2013

ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 68.11

DS/ISO 965-2:1999

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/ISO 965-3:1999

ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 56.83

DS/ISO 965-3/Corr. 1:2009

ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads


Status:
Current
Type:
Correction sheet
Language:
EN
Price from:
€ 0.00

DS/ISO 965-4:1999

ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/ISO 965-5:1999

ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/ISO 1051:2007

Rivet shank diameters


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/EN ISO 1207:2011

Slotted cheese head screws - Product grade A


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 45.81

DS/EN ISO 1234:1998

Split pins


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/ISO/TR 1281-1:2009

Rolling bearings - Explanatory notes on ISO 281 - Part 1: Basic dynamic load rating and basic rating life


Status:
Current
Type:
Standard
Language:
EN
Subject:
Price from:
€ 85.98

DS/ISO/TR 1281-1/Corr. 1:2009

Rolling bearings - Explanatory notes on ISO 281 - Part 1: Basic dynamic load rating and basic rating life


Status:
Current
Type:
Correction sheet
Language:
EN
Subject:
Price from:
€ 0.00

DS/ISO/TR 1281-2:2009

Rolling bearings - Explanatory notes on ISO 281 - Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses


Status:
Current
Type:
Standard
Language:
EN
Subject:
Price from:
€ 96.59

DS/ISO/TR 1281-2/Corr. 1:2009

Rolling bearings - Explanatory notes on ISO 281 - Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses


Status:
Current
Type:
Correction sheet
Language:
EN
Subject:
Price from:
€ 0.00

DS/ISO 1328-1:2013

Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 104.65

DS/ISO 1328-2:2020

Cylindrical gears – ISO system of flank tolerance classification – Part 2: Definitions and allowable values of double flank radial composite deviations


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 68.11

DS/EN ISO 1478:1999

Tapping screw thread


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 34.52

DS/EN ISO 1479:2011

Hexagon head tapping screws


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 45.81

DS/EN ISO 1481:2011

Slotted pan head tapping screws


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 45.81

DS/EN ISO 1482:2011

Slotted countersunk (flat) head tapping screws


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 45.81

DS/EN ISO 1483:2011

Slotted raised countersunk (oval) head tapping screws


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 45.81

DS/ISO 1501:2009

ISO miniature screw threads


Status:
Current
Type:
Standard
Language:
EN
Price from:
€ 60.99

DS/ISO 1502:1999

ISO general-purpose metric screw threads - Gauges and gauging


Status:
Current
Type:
Standard
Language: