54 products found

Please choose at least one filter


Published from

Time limit for review from

Withdrawn from

Released from

Reset
  • Origin

  • Type

  • Status

  • Subjects

DS/EN ISO 286-1:2013

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits


Status:
Current
Type:
Standard
Language:
Danish/English
Subject:
Price from:
€ 113.90

DS/EN ISO 286-1/AC:2013

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits


Status:
Current
Type:
Correction sheet
Language:
English
Subject:
Price from:
€ 0.00

DS/EN ISO 286-2:2010

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 104.75

DS/EN ISO 286-2/AC:2013

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts


Status:
Current
Type:
Correction sheet
Language:
English
Subject:
Price from:
€ 0.00

DS/ISO 370:1980

Toleranced dimensions - Conversion from inches into millimeters and vice versa


Status:
Current
Type:
Standard
Language:
Danish
Subject:
Price from:
€ 26.22

DS/EN ISO 1938-1:2015

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 96.69

DS/EN ISO 1938-2:2017

Geometrical product specifications (GPS) – Dimensional measuring equipment – Part 2: Reference disk gauges (ISO 1938-2:2017)


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 61.05

DS/ISO 2768-1:1993

General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications


Status:
Current
Type:
Standard
Language:
Danish/English
Subject:
Price from:
€ 26.22

DS/EN ISO 5458:2018

Geometrical product specifications (GPS) – Geometrical tolerancing – Pattern and combined geometrical specification (ISO 5458:2018)


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 96.69

DS/EN ISO 5459:2011

Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 113.90

DS/EN ISO 8062-1:2007

Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary


Status:
Current
Type:
Standard
Language:
English/French
Subject:
Price from:
€ 74.63

DS/CEN ISO/TS 8062-2:2013

Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 104.75

DS/EN ISO 8062-3:2007

Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings


Status:
Current
Type:
Standard
Language:
English
Subject:
Under revision:
Price from:
€ 86.06

DS/EN ISO 8062-3/AC:2009

Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings


Status:
Current
Type:
Correction sheet
Language:
English
Subject:
Under revision:
Price from:
€ 0.00

DS/ISO 8062-4:2017

Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 4: General tolerances for castings using profile tolerancing in a general datum system


Status:
Current
Type:
Standard
Language:
English
Subject:
Under revision:
Price from:
€ 74.63

DS/EN ISO 13920:1997

Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position


Status:
Current
Type:
Standard
Language:
Danish/English
Subject:
Price from:
€ 45.85

DS/EN ISO 14405-1:2016

Geometrical product specifications (GPS) – Dimensional tolerancing – Part 1: Linear sizes (ISO 14405-1:2016)


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 104.75

DS/EN ISO 14405-2:2019

Geometrical product specifications (GPS) – Dimensional tolerancing – Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 74.63

DS/EN ISO 14406:2011

Geometrical product specifications (GPS) – Extraction


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 68.18

DS/EN 22768-1:1993

General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications


Status:
Current
Type:
Standard
Language:
Danish/English
Subject:
Price from:
€ 26.22

ISO 286-1:2010

Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 1: Basis of tolerances, deviations and fits


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 143.87

ISO 286-2:2010

Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 162.08

ISO 1938-1:2015

Geometrical product specifications (GPS) – Dimensional measuring equipment – Part 1: Plain limit gauges of linear size


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 125.66

ISO 14405-2:2018

Geometrical product specifications (GPS) – Dimensional tolerancing – Part 2: Dimensions other than linear or angular sizes


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 107.45

ISO 14405-3:2016

Geometrical product specifications (GPS) – Dimensional tolerancing – Part 3: Angular sizes


Status:
Current
Type:
Standard
Language:
English
Subject:
Price from:
€ 107.45

DSF/ISO/DIS 8062-3 ( Draft )

Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings


Status:
Draft
Type:
Standard
Language:
English
Subject:
Price from:
€ 46.66

DSF/prEN ISO 8062-3 ( Draft )

Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO/DIS 8062-3:2019)


Status:
Draft
Type:
Standard
Language:
English

DSF/ISO/DIS 8062-4 ( Draft )

Geometrical product specifications -- Dimensional and geometrical tolerances for moulded parts -- Part 4: Rules and general tolerances for castings using profile tolerancing in a general datum system


Status:
Draft
Type:
Standard
Language:
English
Subject:
Price from:
€ 46.66

ISO/DIS 8062-3 ( Draft )

Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings


Status:
Draft
Type:
Standard
Language:
Subject:

ISO/DIS 8062-4 ( Draft )

Geometrical product specifications -- Dimensional and geometrical tolerances for moulded parts -- Part 4: Rules and general tolerances for castings using profile tolerancing in a general datum system


Status:
Draft
Type:
Standard
Language:
Subject:

DS/INF 57:1991 ( Withdrawn )

Guidelines for Geometrical Product Specifications


Status:
Withdrawn
Type:
Standard
Language:
Subject:
Replaced by:
Price from:
€ 0.00

DS/INF 57:2002 ( Withdrawn )

DS/INF 57:2002

Geometrical Product Specifications (GPS) - Guidance in use


Status:
Withdrawn
Type:
Handbook
Language:
Subject:
Price from:
€ 93.46

DS/ISO 286-1:1993 ( Withdrawn )

ISO system of limits and fits - Part 1: Bases of tolerances, deviations and fits


Status:
Withdrawn
Type:
Standard
Language:
Danish/English
Subject:
Replaced by:
Price from:
€ 104.75

DS/EN ISO 286-1:2010 ( Withdrawn )

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits


Status:
Withdrawn
Type:
Standard
Language:
English
Subject:
Replaced by:
Price from:
€ 96.69

DS/ISO 286-2:1993 ( Withdrawn )

ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviation for holes and shafts


Status:
Withdrawn
Type:
Standard
Language:
Danish/English
Subject:
Replaced by:
Price from:
€ 113.90

DS/ISO 286-2/Corr. 1:2007 ( Withdrawn )

ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviation for holes and shafts


Status:
Withdrawn
Type:
Correction sheet
Language:
English
Subject:
Replaced by:
Price from:
€ 0.00

DS 806:1992 ( Withdrawn )

ISO system of limits and fits - Selection of fits with basic holes


Status:
Withdrawn
Type:
Standard
Language:
Danish
Subject:
Price from:
€ 26.22

DS 807:1992 ( Withdrawn )

ISO system of limits and fits - Selection of fits with basic shafts


Status:
Withdrawn
Type:
Standard
Language:
Danish
Subject:
Price from:
€ 26.22

DS 815:1992 ( Withdrawn )

Selection of tolerance zones for general purposes


Status:
Withdrawn
Type:
Standard
Language:
Danish
Subject:
Replaced by:
Price from:
€ 19.50

DS/EN ISO 1101:2006 ( Withdrawn )

Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out


Status:
Withdrawn
Type:
Standard
Language:
English
Subject:
Replaced by:
Price from:
€ 96.69

DS/EN ISO 1101:2013 ( Withdrawn )

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out


Status:
Withdrawn
Type:
Standard
Language:
English
Subject:
Replaced by:
Price from:
€ 123.71

DS/ISO/R 1938:1980 ( Withdrawn )

ISO-system of limits and fits - Inspection of plain work pieces


Status:
Withdrawn
Type:
Standard
Language:
Danish
Subject:
Replaced by:
Price from:
€ 61.05

DS/ISO 1947:1978 ( Withdrawn )

System of cone tolerances for conical workpieces from C = 1:3 to 1: 500 and lengths from 6 to 630 mm


Status:
Withdrawn
Type:
Standard
Language:
Subject:
Price from:
€ 34.56

DS/ISO 2768-2:1993 ( Withdrawn )

General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications


Status:
Withdrawn
Type:
Standard
Language:
Danish/English
Subject:
Price from:
€ 34.56

DS/EN ISO 5458:1999 ( Withdrawn )

Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing


Status:
Withdrawn
Type:
Standard
Language:
Danish/English
Subject:
Replaced by:
Price from:
€ 74.63

DS/EN ISO 14253-1:1999 ( Withdrawn )

Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications


Status:
Withdrawn
Type:
Standard
Language:
Danish/English
Subject:
Replaced by:
Price from:
€ 86.06

DS/EN ISO 14405-1:2010 ( Withdrawn )

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes


Status:
Withdrawn
Type:
Standard
Language:
English
Subject:
Replaced by:
Price from:
€ 96.69

DS/EN ISO 14405-2:2011 ( Withdrawn )

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes


Status:
Withdrawn
Type:
Standard
Language:
English
Subject:
Replaced by:
Price from:
€ 74.63

DS/EN ISO 14660-1:1999 ( Withdrawn )

Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions


Status:
Withdrawn
Type:
Standard
Language:
Danish/English
Subject:
Price from:
€ 61.05

DS/EN ISO 14660-2:1999 ( Withdrawn )

Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature


Status:
Withdrawn
Type:
Standard
Language:
Danish/English
Subject:
Replaced by:
Price from:
€ 61.05

DS/EN 20286-1:1993 ( Withdrawn )

ISO system of limits and fits - Part 1: Bases of tolerances, deviations and fits


Status:
Withdrawn
Type:
Standard
Language:
Danish/English
Subject:
Replaced by:
Price from:
€ 104.75

DS/EN 20286-2:1993 ( Withdrawn )

ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviation for holes and shafts


Status:
Withdrawn
Type:
Standard
Language:
Danish/English
Subject:
Replaced by:
Price from:
€ 113.90

DS/EN 22768-2:1993 ( Withdrawn )

General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications


Status:
Withdrawn
Type:
Standard
Language:
Danish/English
Subject:
Replaced by:
Price from:
€ 34.56

ISO 8062:1994 ( Withdrawn )

Castings - System of dimensional tolerances and machining allowances


Status:
Withdrawn
Type:
Standard
Language:
Subject:
Price from:
€ 80.13

1