DS/EN 62282-2:2005 ( Withdrawn )

Fuel cell technologies - Part 2: Fuel cell modules

Replaced by:
Price from:
€ 86.03


This part of 62282 provides the minimum requirements for safety and performance of fuel cell modules. This Standard applies to fuel cell modules with the following electrolyte chemistry: – Alkaline, – Proton Exchange Membrane (including Direct Methanol Fuel Cells), – Phosphoric Acid, – Molten Carbonate; – Solid Oxide fuel cell modules.
Fuel cell modules might be provided either with or without an enclosure, and might be operated at significant pressurization levels or close to ambient pressure.
This standard deals with conditions that can yield hazards to persons and damage outside the fuel cell modules only. Protection against damage to the fuel cell modules internals is not addressed in this standard, provided it does not lead to hazards outside the module.
These requirements may be superseded by other standards for equipment containing fuel cell modules as required for particular applications. This part of 62282 is not applicable for road vehicle applications. This standard is not intended to limit or inhibit technological advancement. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of these requirements and, if found to be substantially equivalent, may be considered to comply with the standard. The fuel cell modules are components of final products. These products require evaluation to appropriate end-product safety requirements.

Number of pages: 48

Published: 2005-06-27

Date of approval: 2005-05-18

Date of withdrawal: 2012-11-02

International relationships : EN 62282-2:2004 IDT IEC 62282-2 Ed. 1.0 IDT

ICS: 27.070 - Fuel cells

Item number: 51892



  • CLC/TC 105
  • IEC/TC 105

Danish committee