DS/EN 61000-6-2/Corr.:2005 ( Withdrawn * )

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments


Status:
Withdrawn *
Type:
Correction sheet
Language:
English
Price from:
€ 0.00
Legislation:

Legislation

Harmonized under:
  • Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast) Text with EEA relevance

Harmonized standards:
Links

Scope

This part of 61000 for EMC immunity requirements applies to electrical and electronic
apparatus intended for use in industrial environments, as described below. Immunity
requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be
performed at frequencies where no requirements are specified.
This generic EMC immunity standard is applicable if no relevant dedicated product or
product-family EMC immunity standard exists.
This standard applies to apparatus intended to be connected to a power network supplied
from a high or medium voltage transformer dedicated to the supply of an installation feeding
manufacturing or similar plant, and intended to operate in or in proximity to industrial
locations, as described below. This standard applies also to apparatus which is battery
operated and intended to be used in industrial locations.
The environments encompassed by this standard are industrial, both indoor and outdoor.
Industrial locations are in addition characterised by the existence of one or more of the
following:
– industrial, scientific and medical (ISM) apparatus (as defined in CISPR 11);
– heavy inductive or capacitive loads are frequently switched;
– currents and associated magnetic fields are high.
The object of this standard is to define immunity test requirements for apparatus defined in
the scope in relation to continuous and transient, conducted and radiated disturbances,
including electrostatic discharges.
The immunity requirements have been selected to ensure an adequate level of immunity for
apparatus at industrial locations. The levels do not, however, cover extreme cases, which
may occur at any location, but with an extremely low probability of occurrence. Not all
disturbance phenomena have been included for testing purposes in this standard, but only
those considered as relevant for the equipment covered by this standard. These test
requirements represent essential electromagnetic compatibility immunity requirements.
Test requirements are specified for each port considered.

Number of pages: 8

Published: 2005-12-09

Date of approval: 2005-11-02

International relationships : EN 61000-6-2:2005/corrigendum Sep. 2005 IDT

ICS: 33.100.20 - Immunity

Item number: M208433

*Expected revoked date: 22/02/2022:00


Committees

Committee

  • CLC/TC 210

Danish committee

DS/S-710

Included in